kernel.git/drivers/net/ethernet/ibm, branch linux-4.4.y

ehea: fix error return code in ehea_restart_qps()

2021-07-20T14:22:34Z

[ Upstream commit 015dbf5662fd689d581c0bc980711b073ca09a1a ] Fix to return -EFAULT from the error handling case instead of 0, as done elsewhere in this function. By the way, when get_zeroed_page() fails, directly return -ENOMEM to simplify code. Fixes: 2c69448bbced ("ehea: DLPAR memory add fix") Reported-by: Hulk Robot Signed-off-by: Zhen Lei Link: https://lore.kernel.org/r/20210528085555.9390-1-thunder.leizhen@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ibmveth: Identify ingress large send packets.

2020-10-29T08:02:59Z

[ Upstream commit 413f142cc05cb03f2d1ea83388e40c1ddc0d74e9 ] Ingress large send packets are identified by either: The IBMVETH_RXQ_LRG_PKT flag in the receive buffer or with a -1 placed in the ip header checksum. The method used depends on firmware version. Frame geometry and sufficient header validation is performed by the hypervisor eliminating the need for further header checks here. Fixes: 7b5967389f5a ("ibmveth: set correct gso_size and gso_type") Signed-off-by: David Wilder Reviewed-by: Thomas Falcon Reviewed-by: Cristobal Forno Reviewed-by: Pradeep Satyanarayana Acked-by: Willem de Bruijn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ehea: avoid null pointer dereference

2020-05-10T08:26:31Z

commit 1740c29a46b30a2f157afc473156f157e599d4c2 upstream. ehea_get_port may return NULL. Do not dereference NULL value. Fixes: 8c4877a4128e ("ehea: Use the standard logging functions") Signed-off-by: Heinrich Schuchardt Acked-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ehea: Fix a copy-paste err in ehea_init_port_res

2020-01-29T09:21:42Z

[ Upstream commit c8f191282f819ab4e9b47b22a65c6c29734cefce ] pr->tx_bytes should be assigned to tx_bytes other than rx_bytes. Reported-by: Hulk Robot Fixes: ce45b873028f ("ehea: Fixing statistics") Signed-off-by: YueHaibing Reviewed-by: Mukesh Ojha Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ibmveth: Convert multicast list size for little-endian system

2019-09-10T09:29:46Z

[ Upstream commit 66cf4710b23ab2adda11155684a2c8826f4fe732 ] The ibm,mac-address-filters property defines the maximum number of addresses the hypervisor's multicast filter list can support. It is encoded as a big-endian integer in the OF device tree, but the virtual ethernet driver does not convert it for use by little-endian systems. As a result, the driver is not behaving as it should on affected systems when a large number of multicast addresses are assigned to the device. Reported-by: Hangbin Liu Signed-off-by: Thomas Falcon Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: ibm: fix possible object reference leak

2019-05-16T17:44:58Z

[ Upstream commit be693df3cf9dd113ff1d2c0d8150199efdba37f6 ] The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by: Wen Yang Cc: Douglas Miller Cc: "David S. Miller" Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

ibmveth: Do not process frames after calling napi_reschedule

2019-03-23T07:44:20Z

[ Upstream commit e95d22c69b2c130ccce257b84daf283fd82d611e ] The IBM virtual ethernet driver's polling function continues to process frames after rescheduling NAPI, resulting in a warning if it exhausted its budget. Do not restart polling after calling napi_reschedule. Instead let frames be processed in the following instance. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ibmveth: fix DMA unmap error in ibmveth_xmit_start error path

2019-01-13T09:05:27Z

[ Upstream commit 756af9c642329d54f048bac2a62f829b391f6944 ] Commit 33a48ab105a7 ("ibmveth: Fix DMA unmap error") fixed an issue in the normal code path of ibmveth_xmit_start() that was originally introduced by Commit 6e8ab30ec677 ("ibmveth: Add scatter-gather support"). This original fix missed the error path where dma_unmap_page is wrongly called on the header portion in descs[0] which was mapped with dma_map_single. As a result a failure to DMA map any of the frags results in a dmesg warning when CONFIG_DMA_API_DEBUG is enabled. ------------[ cut here ]------------ DMA-API: ibmveth 30000002: device driver frees DMA memory with wrong function [device address=0x000000000a430000] [size=172 bytes] [mapped as page] [unmapped as single] WARNING: CPU: 1 PID: 8426 at kernel/dma/debug.c:1085 check_unmap+0x4fc/0xe10 ... ... DMA-API: Mapped at: ibmveth_start_xmit+0x30c/0xb60 dev_hard_start_xmit+0x100/0x450 sch_direct_xmit+0x224/0x490 __qdisc_run+0x20c/0x980 __dev_queue_xmit+0x1bc/0xf20 This fixes the API misuse by unampping descs[0] with dma_unmap_single. Fixes: 6e8ab30ec677 ("ibmveth: Add scatter-gather support") Signed-off-by: Tyrel Datwyler Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: emac: fix reset timeout with AR8035 phy

2018-04-13T17:50:20Z

[ Upstream commit 19d90ece81da802207a9b91ce95a29fbdc40626e ] This patch fixes a problem where the AR8035 PHY can't be detected on an Cisco Meraki MR24, if the ethernet cable is not connected on boot. Russell Senior provided steps to reproduce the issue: |Disconnect ethernet cable, apply power, wait until device has booted, |plug in ethernet, check for interfaces, no eth0 is listed. | |This appears to be a problem during probing of the AR8035 Phy chip. |When ethernet has no link, the phy detection fails, and eth0 is not |created. Plugging ethernet later has no effect, because there is no |interface as far as the kernel is concerned. The relevant part of |the boot log looks like this: |this is the failing case: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! |and the succeeding case: | |[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:.. |[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01) Based on the comment and the commit message of commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT"). This is because the AR8035 PHY doesn't provide the TX Clock, if the ethernet cable is not attached. This causes the reset to timeout and the PHY detection code in emac_init_phy() is unable to detect the AR8035 PHY. As a result, the emac driver bails out early and the user left with no ethernet. In order to stay compatible with existing configurations, the driver tries the current reset approach at first. Only if the first attempt timed out, it does perform one more retry with the clock temporarily switched to the internal source for just the duration of the reset. LEDE-Bug: #687 Cc: Chris Blake Reported-by: Russell Senior Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by: Christian Lamparter Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: emac: Fix napi poll list corruption

2017-10-21T15:09:02Z

[ Upstream commit f55956065ec94e3e9371463d693a1029c4cc3007 ] This patch is pretty much a carbon copy of commit 3079c652141f ("caif: Fix napi poll list corruption") with "caif" replaced by "emac". The commit d75b1ade567f ("net: less interrupt masking in NAPI") breaks emac. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers emac tries to do a last-ditch check and if there is more work it will call napi_reschedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in emac. Signed-off-by: Christian Lamparter Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman