kernel.git/drivers/net/ethernet/freescale, branch linux-5.12.y

net: fec: add ndo_select_queue to fix TX bandwidth fluctuations

2021-07-19T08:01:03Z

[ Upstream commit 52c4a1a85f4b346c39c896c0168f4a843b3385ff ] As we know that AVB is enabled by default, and the ENET IP design is queue 0 for best effort, queue 1&2 for AVB Class A&B. Bandwidth of each queue 1&2 set in driver is 50%, TX bandwidth fluctuated when selecting tx queues randomly with FEC_QUIRK_HAS_AVB quirk available. This patch adds ndo_select_queue callback to select queues for transmitting to fix this issue. It will always return queue 0 if this is not a vlan packet, and return queue 1 or 2 based on priority of vlan packet. You may complain that in fact we only use single queue for trasmitting if we are not targeted to VLAN. Yes, but seems we have no choice, since AVB is enabled when the driver probed, we can't switch this feature dynamicly. After compare multiple queues to single queue, TX throughput almost no improvement. One way we can implemet is to configure the driver to multiple queues with Round-robin scheme by default. Then add ndo_setup_tc callback to enable/disable AVB feature for users. Unfortunately, ENET AVB IP seems not follow the standard 802.1Qav spec. We only can program DMAnCFG[IDLE_SLOPE] field to calculate bandwidth fraction. And idle slope is restricted to certain valus (a total of 19). It's far away from CBS QDisc implemented in Linux TC framework. If you strongly suggest to do this, I think we only can support limited numbers of bandwidth and reject others, but it's really urgly and wried. With this patch, VLAN tagged packets route to queue 0/1/2 based on vlan priority; VLAN untagged packets route to queue 0. Tested-by: Frieder Schrempf Reported-by: Frieder Schrempf Signed-off-by: Fugang Duan Signed-off-by: Joakim Zhang Reported-by: kernel test robot Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: fec: add FEC_QUIRK_HAS_MULTI_QUEUES represents i.MX6SX ENET IP

2021-07-19T08:01:03Z

[ Upstream commit 471ff4455d61c9929ae912328859921708e1eafc ] Frieder Schrempf reported a TX throuthput issue [1], it happens quite often that the measured bandwidth in TX direction drops from its expected/nominal value to something like ~50% (for 100M) or ~67% (for 1G) connections. [1] https://lore.kernel.org/linux-arm-kernel/421cc86c-b66f-b372-32f7-21e59f9a98bc@kontron.de/ The issue becomes clear after digging into it, Net core would select queues when transmitting packets. Since FEC have not impletemented ndo_select_queue callback yet, so it will call netdev_pick_tx to select queues randomly. For i.MX6SX ENET IP with AVB support, driver default enables this feature. According to the setting of QOS/RCMRn/DMAnCFG registers, AVB configured to Credit-based scheme, 50% bandwidth of each queue 1&2. With below tests let me think more: 1) With FEC_QUIRK_HAS_AVB quirk, can reproduce TX bandwidth fluctuations issue. 2) Without FEC_QUIRK_HAS_AVB quirk, can't reproduce TX bandwidth fluctuations issue. The related difference with or w/o FEC_QUIRK_HAS_AVB quirk is that, whether we program FTYPE field of TxBD or not. As I describe above, AVB feature is enabled by default. With FEC_QUIRK_HAS_AVB quirk, frames in queue 0 marked as non-AVB, and frames in queue 1&2 marked as AVB Class A&B. It's unreasonable if frames in queue 1&2 are not required to be time-sensitive. So when Net core select tx queues ramdomly, Credit-based scheme would work and lead to TX bandwidth fluctuated. On the other hand, w/o FEC_QUIRK_HAS_AVB quirk, frames in queue 1&2 are all marked as non-AVB, so Credit-based scheme would not work. Till now, how can we fix this TX throughput issue? Yes, please remove FEC_QUIRK_HAS_AVB quirk if you suffer it from time-nonsensitive networking. However, this quirk is used to indicate i.MX6SX, other setting depends on it. So this patch adds a new quirk FEC_QUIRK_HAS_MULTI_QUEUES to represent i.MX6SX, it is safe for us remove FEC_QUIRK_HAS_AVB quirk now. FEC_QUIRK_HAS_AVB quirk is set by default in the driver, and users may not know much about driver details, they would waste effort to find the root cause, that is not we want. The following patch is a implementation to fix it and users don't need to modify the driver. Tested-by: Frieder Schrempf Reported-by: Frieder Schrempf Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: fec_ptp: add clock rate zero check

2021-06-23T12:44:11Z

commit cb3cefe3f3f8af27c6076ef7d1f00350f502055d upstream. Add clock rate zero check to fix coverity issue of "divide by 0". Fixes: commit 85bd1798b24a ("net: fec: fix spin_lock dead lock") Signed-off-by: Fugang Duan Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: fec_ptp: fix issue caused by refactor the fec_devtype

2021-06-23T12:44:00Z

[ Upstream commit d23765646e71b43ed2b809930411ba5c0aadee7b ] Commit da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") refactor the fec_devtype, need adjust ptp driver accordingly. Fixes: da722186f654 ("net: fec: set GPR bit on suspend by DT configuration.") Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: fec: fix the potential memory leak in fec_enet_init()

2021-06-03T07:09:45Z

[ Upstream commit 619fee9eb13b5d29e4267cb394645608088c28a8 ] If the memory allocated for cbd_base is failed, it should free the memory allocated for the queues, otherwise it causes memory leak. And if the memory allocated for the queues is failed, it can return error directly. Fixes: 59d0f7465644 ("net: fec: init multi queue date structure") Signed-off-by: Fugang Duan Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: fec: use mac-managed PHY PM

2021-05-19T08:56:14Z

[ Upstream commit 557d5dc83f6831b4e54d141e9b121850406f9a60 ] Use the new mac_managed_pm flag to work around an issue with KSZ8081 PHY that becomes unstable when a soft reset is triggered during aneg. Reported-by: Joakim Zhang Tested-by: Joakim Zhang Signed-off-by: Heiner Kallweit Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: enetc: fix link error again

2021-05-14T08:53:03Z

[ Upstream commit 74c97ea3b61e4ce149444f904ee8d4fc7073505b ] A link time bug that I had fixed before has come back now that another sub-module was added to the enetc driver: ERROR: modpost: "enetc_ierb_register_pf" [drivers/net/ethernet/freescale/enetc/fsl-enetc.ko] undefined! The problem is that the enetc Makefile is not actually used for the ierb module if that is the only built-in driver in there and everything else is a loadable module. Fix it by always entering the directory this time, regardless of which symbols are configured. This should reliably fix the problem and prevent it from coming back another time. Fixes: 112463ddbe82 ("net: dsa: felix: fix link error") Fixes: e7d48e5fbf30 ("net: enetc: add a mini driver for the Integrated Endpoint Register Block") Signed-off-by: Arnd Bergmann Acked-by: Vladimir Oltean Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

gianfar: Handle error code at MAC address change

2021-03-29T20:45:41Z

Handle return error code of eth_mac_addr(); Fixes: 3d23a05c75c7 ("gianfar: Enable changing mac addr when if up") Signed-off-by: Claudiu Manoil Signed-off-by: David S. Miller

net: enetc: allow hardware timestamping on TX queues with tc-etf enabled

2021-03-08T20:03:42Z

The txtime is passed to the driver in skb->skb_mstamp_ns, which is actually in a union with skb->tstamp (the place where software timestamps are kept). Since commit b50a5c70ffa4 ("net: allow simultaneous SW and HW transmit timestamping"), __sock_recv_timestamp has some logic for making sure that the two calls to skb_tstamp_tx: skb_tx_timestamp(skb) # Software timestamp in the driver -> skb_tstamp_tx(skb, NULL) and skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver will both do the right thing and in a race-free manner, meaning that skb_tx_timestamp will deliver a cmsg with the software timestamp only, and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg with the hardware timestamp only. Why are races even possible? Well, because although the software timestamp skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb) lives in skb_shinfo(skb), an area which is shared between skbs and their clones. And skb_tstamp_tx works by cloning the packets when timestamping them, therefore attempting to perform hardware timestamping on an skb's clone will also change the hardware timestamp of the original skb. And the original skb might have been yet again cloned for software timestamping, at an earlier stage. So the logic in __sock_recv_timestamp can't be as simple as saying "does this skb have a hardware timestamp? if yes I'll send the hardware timestamp to the socket, otherwise I'll send the software timestamp", precisely because the hardware timestamp is shared. Instead, it's quite the other way around: __sock_recv_timestamp says "does this skb have a software timestamp? if yes, I'll send the software timestamp, otherwise the hardware one". This works because the software timestamp is not shared with clones. But that means we have a problem when we attempt hardware timestamping with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp will say "oh, yeah, this must be some sort of odd clone" and will not deliver the hardware timestamp to the socket. And this is exactly what is happening when we have txtime enabled on the socket: as mentioned, that is put in a union with skb->tstamp, so it is quite easy to mistake it. Do what other drivers do (intel igb/igc) and write zero to skb->tstamp before taking the hardware timestamp. It's of no use to us now (we're already on the TX confirmation path). Fixes: 0d08c9ec7d6e ("enetc: add support time specific departure base on the qos etf") Cc: Vinicius Costa Gomes Signed-off-by: Vladimir Oltean Acked-by: Vinicius Costa Gomes Signed-off-by: David S. Miller

net: enetc: set MAC RX FIFO to recommended value

2021-03-08T20:03:42Z

On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high and may lead to RX lock-up under traffic at a rate higher than 6 Gbps. Set it to 1 instead, as recommended by the hardware design team and by later versions of the ENETC block guide. Signed-off-by: Alex Marginean Reviewed-by: Claudiu Manoil Reviewed-by: Jason Liu Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller