kernel.git/drivers/net/ethernet/faraday, branch linux-6.16.y

net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect

2025-08-20T16:40:45Z

commit e88fbc30dda1cb7438515303704ceddb3ade4ecd upstream. After the call to phy_disconnect() netdev->phydev is reset to NULL. So fixed_phy_unregister() would be called with a NULL pointer as argument. Therefore cache the phy_device before this call. Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Reviewed-by: Dawid Osuchowski Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ftgmac100: select FIXED_PHY

2025-06-18T21:11:16Z

Depending on e.g. DT configuration this driver uses a fixed link. So we shouldn't rely on the user to enable FIXED_PHY, select it in Kconfig instead. We may end up with a non-functional driver otherwise. Fixes: 38561ded50d0 ("net: ftgmac100: support fixed link") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Link: https://patch.msgid.link/476bb33b-5584-40f0-826a-7294980f2895@gmail.com Signed-off-by: Jakub Kicinski

net: phy: fixed_phy: remove irq argument from fixed_phy_register

2025-05-21T01:17:43Z

All callers pass PHY_POLL, therefore remove irq argument from fixed_phy_register(). Note: I keep the irq argument in fixed_phy_add_gpiod() for now, for the case that somebody may want to use a GPIO interrupt in the future, by e.g. adding a call to fwnode_irq_get() to fixed_phy_get_gpiod(). Signed-off-by: Heiner Kallweit Reviewed-by: Simon Horman Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/31cdb232-a5e9-4997-a285-cb9a7d208124@gmail.com Signed-off-by: Jakub Kicinski

net: ftgmac100: refactor getting phy device handle

2024-10-29T22:41:16Z

Consolidate the handling of dedicated PHY and fixed-link phy by taking advantage of logic in of_phy_get_and_connect() which handles both of these cases, rather than open coding the same logic in ftgmac100_probe(). Signed-off-by: Jacky Chou Reviewed-by: Simon Horman Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20241022084214.1261174-1-jacky_chou@aspeedtech.com Signed-off-by: Jakub Kicinski

net: ftgmac100: correct the phy interface of NC-SI mode

2024-10-20T16:06:48Z

In NC-SI specification, NC-SI is using RMII, not MII. Signed-off-by: Jacky Chou Reviewed-by: Andrew Lunn Message-ID: <20241018053331.1900100-1-jacky_chou@aspeedtech.com> Signed-off-by: Andrew Lunn

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-10-10T20:13:33Z

Cross-merge networking fixes after downstream PR (net-6.12-rc3). No conflicts and no adjacent changes. Signed-off-by: Jakub Kicinski

net: ftgmac100: fixed not check status from fixed phy

2024-10-10T00:56:55Z

Add error handling from calling fixed_phy_register. It may return some error, therefore, need to check the status. And fixed_phy_register needs to bind a device node for mdio. Add the mac device node for fixed_phy_register function. This is a reference to this function, of_phy_register_fixed_link(). Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Signed-off-by: Jacky Chou Link: https://patch.msgid.link/20241007032435.787892-1-jacky_chou@aspeedtech.com Signed-off-by: Jakub Kicinski

net: ethernet: Switch back to struct platform_driver::remove()

2024-10-04T23:39:56Z

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/net/ethernet to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com Signed-off-by: Jakub Kicinski

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-09-13T00:11:24Z

Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski

net: ftgmac100: Enable TX interrupt to avoid TX timeout

2024-09-10T10:50:07Z

Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com Signed-off-by: Paolo Abeni