kernel.git/drivers/net/ethernet/dlink, branch linux-5.4.y

net: dlink: handle dma_map_single() failure properly

2025-10-29T12:59:56Z

[ Upstream commit 65946eac6d888d50ae527c4e5c237dbe5cc3a2f2 ] There is no error handling for `dma_map_single()` failures. Add error handling by checking `dma_mapping_error()` and freeing the `skb` using `dev_kfree_skb()` (process context) when it fails. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yeounsu Moon Tested-on: D-Link DGE-550T Rev-A3 Suggested-by: Simon Horman Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dl2k: switch from 'pci_' to 'dma_' API

2025-10-29T12:59:56Z

[ Upstream commit b49db89e9697ddfa7fbe7387e176072ee2feb2db ] The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'rio_probe1()' GFP_KERNEL can be used because it is a probe function and no lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller Stable-dep-of: 65946eac6d88 ("net: dlink: handle dma_map_single() failure properly") Signed-off-by: Sasha Levin

net: dlink: fix multicast stats being counted incorrectly

2025-09-04T12:05:54Z

[ Upstream commit 007a5ffadc4fd51739527f1503b7cf048f31c413 ] `McstFramesRcvdOk` counts the number of received multicast packets, and it reports the value correctly. However, reading `McstFramesRcvdOk` clears the register to zero. As a result, the driver was reporting only the packets since the last read, instead of the accumulated total. Fix this by updating the multicast statistics accumulatively instaed of instantaneously. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Tested-on: D-Link DGE-550T Rev-A3 Signed-off-by: Yeounsu Moon Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20250823182927.6063-3-yyyynoom@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dlink: add synchronization for stats update

2025-06-27T10:02:54Z

[ Upstream commit 12889ce926e9a9baf6b83d809ba316af539b89e2 ] This patch synchronizes code that accesses from both user-space and IRQ contexts. The `get_stats()` function can be called from both context. `dev->stats.tx_errors` and `dev->stats.collisions` are also updated in the `tx_errors()` function. Therefore, these fields must also be protected by synchronized. There is no code that accessses `dev->stats.tx_errors` between the previous and updated lines, so the updating point can be moved. Signed-off-by: Moon Yeounsu Link: https://patch.msgid.link/20250515075333.48290-1-yyyynoom@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dlink: Correct endianness handling of led_mode

2025-06-04T12:32:25Z

[ Upstream commit e7e5ae71831c44d58627a991e603845a2fed2cab ] As it's name suggests, parse_eeprom() parses EEPROM data. This is done by reading data, 16 bits at a time as follows: for (i = 0; i < 128; i++) ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i)); sromdata is at the same memory location as psrom. And the type of psrom is a pointer to struct t_SROM. As can be seen in the loop above, data is stored in sromdata, and thus psrom, as 16-bit little-endian values. However, the integer fields of t_SROM are host byte order integers. And in the case of led_mode this leads to a little endian value being incorrectly treated as host byte order. Looking at rio_set_led_mode, this does appear to be a bug as that code masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a reversed byte order. This problem would only manifest on big endian hosts. Found by inspection while investigating a sparse warning regarding the crc field of t_SROM. I believe that warning is a false positive. And although I plan to send a follow-up to use little-endian types for other the integer fields of PSROM_t I do not believe that will involve any bug fixes. Compile tested only. Fixes: c3f45d322cbd ("dl2k: Add support for IP1000A-based cards") Signed-off-by: Simon Horman Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net:dl2k: Replace dev_kfree_skb_irq by dev_consume_skb_irq

2019-02-14T17:25:24Z

dev_consume_skb_irq() should be called when skb xmit done.It makes drop profiles more friendly. Signed-off-by: Huang Zijiang Signed-off-by: David S. Miller

net:dl2k: Modify the code style escaping the warning

2019-02-14T17:25:24Z

modify the code style in order to removing the following warning when excute the script checkpatch.pl WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by: Huang Zijiang Signed-off-by: David S. Miller

net: dlink: sundance: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles

2019-02-14T16:56:36Z

dev_consume_skb_irq() should be called in intr_handler() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Remove a redundant blank line in intr_handler(). Signed-off-by: Yang Wei Signed-off-by: David S. Miller