kernel.git/drivers/net/ethernet/dec, branch linux-5.14.y

net: tulip: winbond-840: fix build for UML

2021-11-17T10:04:07Z

[ Upstream commit a3d708925fcca1a2f7219bc9ce93e6341f85c1e0 ] On i386, when builtin (not a loadable module), the winbond-840 driver inspects boot_cpu_data to see what CPU family it is running on, and then acts on that data. The "family" struct member (x86) does not exist when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/ethernet/dec/tulip/winbond-840.c: In function ‘init_registers’: ../drivers/net/ethernet/dec/tulip/winbond-840.c:882:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’ if (boot_cpu_data.x86 <= 4) { Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap Cc: linux-um@lists.infradead.org Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Link: https://lore.kernel.org/r/20211014050606.7288-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tulip: windbond-840: Fix missing pci_disable_device() in probe and remove

2021-07-28T08:26:49Z

Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: David S. Miller

net: tulip: Remove the repeated declaration

2021-06-07T21:03:11Z

Function 'pnic2_lnk_change' is declared twice, so remove the repeated declaration. Cc: "David S. Miller" Cc: Jakub Kicinski Signed-off-by: Shaokun Zhang Signed-off-by: David S. Miller

net: dec: remove leading spaces before tabs

2021-05-19T19:17:31Z

There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by: Hui Tang Signed-off-by: David S. Miller

tulip: de2104x: use module_pci_driver to simplify the code

2021-04-07T22:15:01Z

Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller

tulip: windbond-840: use module_pci_driver to simplify the code

2021-04-07T22:15:01Z

Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller

drivers: net: tulip: Fix set but not used with W=1

2020-11-02T23:50:04Z

When compiled for platforms other than __i386__ or __x86_64__: drivers/net/ethernet/dec/tulip/tulip_core.c: In function ‘tulip_init_one’: drivers/net/ethernet/dec/tulip/tulip_core.c:1296:13: warning: variable ‘last_irq’ set but not used [-Wunused-but-set-variable] 1296 | static int last_irq; Add more #if defined() to totally remove the code when not needed. Signed-off-by: Andrew Lunn Link: https://lore.kernel.org/r/20201031005445.1060112-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski

net: dec: tulip: de2104x: Add shutdown handler to stop NIC

2020-10-31T00:14:38Z

The driver does not implement a shutdown handler which leads to issues when using kexec in certain scenarios. The NIC keeps on fetching descriptors which gets flagged by the IOMMU with errors like this: DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 DMAR: DMAR:[DMA read] Request device [5e:00.0]fault addr fffff000 Signed-off-by: Moritz Fischer Link: https://lore.kernel.org/r/20201028172125.496942-1-mdf@kernel.org Signed-off-by: Jakub Kicinski

drivers/net/ethernet: clean up unused assignments

2020-09-25T23:29:00Z

As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg Acked-by: Edward Cree Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-09-22T23:45:34Z

Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller