kernel.git/drivers/net/ethernet/broadcom, branch linux-6.7.y

net/bnx2x: Prevent access to a freed page in page_pool

2024-03-26T22:18:58Z

[ Upstream commit d27e2da94a42655861ca4baea30c8cd65546f25d ] Fix race condition leading to system crash during EEH error handling During EEH error recovery, the bnx2x driver's transmit timeout logic could cause a race condition when handling reset tasks. The bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(), which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload() SGEs are freed using bnx2x_free_rx_sge_range(). However, this could overlap with the EEH driver's attempt to reset the device using bnx2x_io_slot_reset(), which also tries to free SGEs. This race condition can result in system crashes due to accessing freed memory locations in bnx2x_free_rx_sge() 799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp, 800 struct bnx2x_fastpath *fp, u16 index) 801 { 802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index]; 803 struct page *page = sw_buf->page; .... where sw_buf was set to NULL after the call to dma_unmap_page() by the preceding thread. EEH: Beginning: 'slot_reset' PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset() bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing... bnx2x 0011:01:00.0: enabling device (0140 -> 0142) bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000025065fc Oops: Kernel access of bad area, sig: 11 [#1] ..... Call Trace: [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable) [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0 [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550 [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60 [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170 [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0 [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64 To solve this issue, we need to verify page pool allocations before freeing. Fixes: 4cace675d687 ("bnx2x: Alloc 4k fragment for each rx ring buffer element") Signed-off-by: Thinh Tran Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: bcmasp: Sanity check is off by one

2024-03-01T12:41:55Z

[ Upstream commit f120e62e37f0af4c4cbe08e5a88ea60a6a17c858 ] A sanity check for OOB write is off by one leading to a false positive when the array is full. Fixes: 9b90aca97f6d ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()") Signed-off-by: Justin Chen Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bcmasp: Indicate MAC is in charge of PHY PM

2024-03-01T12:41:55Z

[ Upstream commit 5b76d928f8b779a1b19c5842e7cabee4cbb610c3 ] Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The ASP driver essentially does exactly what mdio_bus_phy_resume() does. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Florian Fainelli Signed-off-by: Justin Chen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Prevent kernel warning when running offline self test

2024-02-01T00:21:05Z

[ Upstream commit c20f482129a582455f02eb9a6dcb2a4215274599 ] We call bnxt_half_open_nic() to setup the chip partially to run loopback tests. The rings and buffers are initialized normally so that we can transmit and receive packets in loopback mode. That means page pool buffers are allocated for the aggregation ring just like the normal case. NAPI is not needed because we are just polling for the loopback packets. When we're done with the loopback tests, we call bnxt_half_close_nic() to clean up. When freeing the page pools, we hit a WARN_ON() in page_pool_unlink_napi() because the NAPI state linked to the page pool is uninitialized. The simplest way to avoid this warning is just to initialize the NAPIs during half open and delete the NAPIs during half close. Trying to skip the page pool initialization or skip linking of NAPI during half open will be more complicated. This fix avoids this warning: WARNING: CPU: 4 PID: 46967 at net/core/page_pool.c:946 page_pool_unlink_napi+0x1f/0x30 CPU: 4 PID: 46967 Comm: ethtool Tainted: G S W 6.7.0-rc5+ #22 Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021 RIP: 0010:page_pool_unlink_napi+0x1f/0x30 Code: 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 18 48 85 c0 74 1b 48 8b 50 10 83 e2 01 74 08 8b 40 34 83 f8 ff 74 02 <0f> 0b 48 c7 47 18 00 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 RSP: 0018:ffa000003d0dfbe8 EFLAGS: 00010246 RAX: ff110003607ce640 RBX: ff110010baf5d000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: ff110001e5e522c0 RDI: ff110010baf5d000 RBP: ff11000145539b40 R08: 0000000000000001 R09: ffffffffc063f641 R10: ff110001361eddb8 R11: 000000000040000f R12: 0000000000000001 R13: 000000000000001c R14: ff1100014553a080 R15: 0000000000003fc0 FS: 00007f9301c4f740(0000) GS:ff1100103fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f91344fa8f0 CR3: 00000003527cc005 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? __warn+0x81/0x140 ? page_pool_unlink_napi+0x1f/0x30 ? report_bug+0x102/0x200 ? handle_bug+0x44/0x70 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? bnxt_free_ring.isra.123+0xb1/0xd0 [bnxt_en] ? page_pool_unlink_napi+0x1f/0x30 page_pool_destroy+0x3e/0x150 bnxt_free_mem+0x441/0x5e0 [bnxt_en] bnxt_half_close_nic+0x2a/0x40 [bnxt_en] bnxt_self_test+0x21d/0x450 [bnxt_en] __dev_ethtool+0xeda/0x2e30 ? native_queued_spin_lock_slowpath+0x17f/0x2b0 ? __link_object+0xa1/0x160 ? _raw_spin_unlock_irqrestore+0x23/0x40 ? __create_object+0x5f/0x90 ? __kmem_cache_alloc_node+0x317/0x3c0 ? dev_ethtool+0x59/0x170 dev_ethtool+0xa7/0x170 dev_ioctl+0xc3/0x530 sock_do_ioctl+0xa8/0xf0 sock_ioctl+0x270/0x310 __x64_sys_ioctl+0x8c/0xc0 do_syscall_64+0x3e/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Fixes: 294e39e0d034 ("bnxt: hook NAPIs to page pools") Reviewed-by: Andy Gospodarek Reviewed-by: Ajit Khaparde Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20240117234515.226944-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Wait for FLR to complete during probe

2024-02-01T00:21:05Z

[ Upstream commit 3c1069fa42872f95cf3c6fedf80723d391e12d57 ] The first message to firmware may fail if the device is undergoing FLR. The driver has some recovery logic for this failure scenario but we must wait 100 msec for FLR to complete before proceeding. Otherwise the recovery will always fail. Fixes: ba02629ff6cb ("bnxt_en: log firmware status on firmware init failure") Reviewed-by: Damodharam Ammepalli Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20240117234515.226944-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()

2024-01-04T11:09:59Z

The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was mis-applied to bnxt_cfg_ntp_filters() and should have been applied to bnxt_sp_task(). Fixes: 19241368443f ("bnxt_en: Send PF driver unload notification to all VFs.") Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: David S. Miller

net: bcmgenet: Fix FCS generation for fragmented skbuffs

2024-01-03T00:19:41Z

The flag DMA_TX_APPEND_CRC was only written to the first DMA descriptor in the TX path, where each descriptor corresponds to a single skbuff fragment (or the skbuff head). This led to packets with no FCS appearing on the wire if the kernel allocated the packet in fragments, which would always happen when using PACKET_MMAP/TPACKET (cf. tpacket_fill_skb() in net/af_packet.c). Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Adrian Cinal Acked-by: Doug Berger Acked-by: Florian Fainelli Link: https://lore.kernel.org/r/20231228135638.1339245-1-adriancinal1@gmail.com Signed-off-by: Jakub Kicinski

bnxt_en: do not map packet buffers twice

2023-12-15T18:14:40Z

Remove double-mapping of DMA buffers as it can prevent page pool entries from being freed. Mapping is managed by page pool infrastructure and was previously managed by the driver in __bnxt_alloc_rx_page before allowing the page pool infrastructure to manage it. Fixes: 578fcfd26e2a ("bnxt_en: Let the page pool manage the DMA mapping") Reviewed-by: Somnath Kotur Signed-off-by: Andy Gospodarek Signed-off-by: Michael Chan Reviewed-by: David Wei Link: https://lore.kernel.org/r/20231214213138.98095-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski

bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic

2023-12-09T01:20:26Z

When the chip is configured to timestamp all receive packets, the timestamp in the RX completion is only valid if the metadata present flag is not set for packets received on the wire. In addition, internal loopback packets will never have a valid timestamp and the timestamp field will always be zero. We must exclude any 0 value in the timestamp field because there is no way to determine if it is a loopback packet or not. Add a new function bnxt_rx_ts_valid() to check for all timestamp valid conditions. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Reviewed-by: Andy Gospodarek Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20231208001658.14230-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski

bnxt_en: Fix wrong return value check in bnxt_close_nic()

2023-12-09T01:20:26Z

The wait_event_interruptible_timeout() function returns 0 if the timeout elapsed, -ERESTARTSYS if it was interrupted by a signal, and the remaining jiffies otherwise if the condition evaluated to true before the timeout elapsed. Driver should have checked for zero return value instead of a positive value. MChan: Print a warning for -ERESTARTSYS. The close operation will proceed anyway when wait_event_interruptible_timeout() returns for any reason. Since we do the close no matter what, we should not return this error code to the caller. Change bnxt_close_nic() to a void function and remove all error handling from some of the callers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Andy Gospodarek Reviewed-by: Vikas Gupta Reviewed-by: Somnath Kotur Signed-off-by: Kalesh AP Signed-off-by: Michael Chan Link: https://lore.kernel.org/r/20231208001658.14230-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski