kernel.git/drivers/net/ethernet/broadcom, branch linux-6.3.y

bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks

2023-06-14T09:16:52Z

[ Upstream commit 1eb4ef12591348c440ac9d6efcf7521e73cf2b10 ] As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks. Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result. Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by: Kalesh Anakkur Purayil Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event

2023-06-14T09:16:52Z

[ Upstream commit 319a7827df9784048abe072afe6b4fb4501d8de4 ] The firmware can send PHC_RTC_UPDATE async event on a PF that may not have PTP registered. In such a case, there will be a null pointer deference for bp->ptp_cfg when we try to handle the event. Fix it by not registering for this event with the firmware if !bp->ptp_cfg. Also, check that bp->ptp_cfg is valid before proceeding when we receive the event. Fixes: 8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode") Signed-off-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bnxt_en: Skip firmware fatal error recovery if chip is not accessible

2023-06-14T09:16:52Z

[ Upstream commit 83474a9b252ab23e6003865c2775024344cb9c09 ] Driver starts firmware fatal error recovery by detecting heartbeat failure or fw reset count register changing. But these checks are not reliable if the device is not accessible. This can happen while DPC (Downstream Port containment) is in progress. Skip firmware fatal recovery if pci_device_is_present() returns false. Fixes: acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.") Reviewed-by: Somnath Kotur Reviewed-by: Pavan Chebbi Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bnxt_en: Query default VLAN before VNIC setup on a VF

2023-06-14T09:16:52Z

[ Upstream commit 1a9e4f501bc6ff1b6ecb60df54fbf2b54db43bfe ] We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by: Pavan Chebbi Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bnxt_en: Don't issue AP reset during ethtool's reset operation

2023-06-14T09:16:52Z

[ Upstream commit 1d997801c7cc6a7f542e46d5a6bf16f893ad3fe9 ] Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it. Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by: Pavan Chebbi Signed-off-by: Sreekanth Reddy Signed-off-by: Michael Chan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()

2023-06-14T09:16:51Z

[ Upstream commit 095d5dc0c1d9f3284e3c575ccf4c0e8b04b548f8 ] We must specify the vnic id of the vnic in the input structure of this firmware message. Otherwise we will get an error from the firmware. Fixes: 98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm") Reviewed-by: Kalesh Anakkur Purayil Reviewed-by: Somnath Kotur Signed-off-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: bcmgenet: Fix EEE implementation

2023-06-14T09:16:51Z

[ Upstream commit a9f31047baca57d47440c879cf259b86f900260c ] We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli Reviewed-by: Russell King (Oracle) Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: bcmgenet: Restore phy_stop() depending upon suspend/close

2023-05-24T16:30:17Z

[ Upstream commit 225c657945c4a6307741cb3cc89467eadcc26e9b ] Removing the phy_stop() from bcmgenet_netif_stop() ended up causing warnings from the PHY library that phy_start() is called from the RUNNING state since we are no longer stopping the PHY state machine during bcmgenet_suspend(). Restore the call to phy_stop() but make it conditional on being called from the close or suspend path. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli Reviewed-by: Pavan Chebbi Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()

2023-05-24T16:30:17Z

[ Upstream commit 93e0401e0fc0c54b0ac05b687cd135c2ac38187c ] The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Stable-dep-of: 225c657945c4 ("net: bcmgenet: Restore phy_stop() depending upon suspend/close") Signed-off-by: Sasha Levin

bnxt: avoid overflow in bnxt_get_nvram_directory()

2023-05-24T16:30:05Z

[ Upstream commit 7c6dddc239abe660598c49ec95ea0ed6399a4b2a ] The value of an arithmetic expression is subject of possible overflow due to a failure to cast operands to a larger data type before performing arithmetic. Used macro for multiplication instead operator for avoiding overflow. Found by Security Code and Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Maxim Korotkov Reviewed-by: Pavan Chebbi Link: https://lore.kernel.org/r/20230309174347.3515-1-korotkov.maxim.s@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin