kernel.git/drivers/net/ethernet/broadcom, branch linux-6.12.y

bnxt_en: Fix deleting of Ntuple filters

2026-03-04T12:21:32Z

[ Upstream commit c1bbd9900d65ac65b9fce9f129e3369a04871570 ] Ntuple filters can be deleted when the interface is down. The current code blindly sends the filter delete command to FW. When the interface is down, all the VNICs are deleted in the FW. When the VNIC is freed in the FW, all the associated filters are also freed. We need not send the free command explicitly. Sending such command will generate FW error in the dmesg. In order to fix this, we can safely return from bnxt_hwrm_cfa_ntuple_filter_free() when BNXT_STATE_OPEN is not true which confirms the VNICs have been deleted. Fixes: 8336a974f37d ("bnxt_en: Save user configured filters in a lookup list") Suggested-by: Michael Chan Signed-off-by: Pavan Chebbi Signed-off-by: Michael Chan Link: https://patch.msgid.link/20260219185313.2682148-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Fix RSS context delete logic

2026-03-04T12:21:32Z

[ Upstream commit e123d9302d223767bd910bfbcfe607bae909f8ac ] We need to free the corresponding RSS context VNIC in FW everytime an RSS context is deleted in driver. Commit 667ac333dbb7 added a check to delete the VNIC in FW only when netif_running() is true to help delete RSS contexts with interface down. Having that condition will make the driver leak VNICs in FW whenever close() happens with active RSS contexts. On the subsequent open(), as part of RSS context restoration, we will end up trying to create extra VNICs for which we did not make any reservation. FW can fail this request, thereby making us lose active RSS contexts. Suppose an RSS context is deleted already and we try to process a delete request again, then the HWRM functions will check for validity of the request and they simply return if the resource is already freed. So, even for delete-when-down cases, netif_running() check is not necessary. Remove the netif_running() condition check when deleting an RSS context. Reported-by: Jakub Kicinski Fixes: 667ac333dbb7 ("eth: bnxt: allow deleting RSS contexts when the device is down") Reviewed-by: Andy Gospodarek Signed-off-by: Pavan Chebbi Signed-off-by: Michael Chan Link: https://patch.msgid.link/20260219185313.2682148-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Allow ntuple filters for drops

2026-03-04T12:21:18Z

[ Upstream commit 61cef6454cfbb9fcdbe41401fb53895f86603081 ] It appears that in commit 7efd79c0e689 ("bnxt_en: Add drop action support for ntuple"), bnxt gained support for ntuple filters for packet drops. However, support for this does not seem to work in recent kernels or against net-next: % sudo ethtool -U eth0 flow-type udp4 src-ip 1.1.1.1 action -1 rmgr: Cannot insert RX class rule: Operation not supported Cannot insert classification rule The issue is that the existing code uses ethtool_get_flow_spec_ring_vf, which will return a non-zero value if the ring_cookie is set to RX_CLS_FLOW_DISC, which then causes bnxt_add_ntuple_cls_rule to return -EOPNOTSUPP because it thinks the user is trying to set an ntuple filter for a vf. Fix this by first checking that the ring_cookie is not RX_CLS_FLOW_DISC. After this patch, ntuple filters for drops can be added: % sudo ethtool -U eth0 flow-type udp4 src-ip 1.1.1.1 action -1 Added rule with ID 0 % ethtool -n eth0 44 RX rings available Total 1 rules Filter: 0 Rule Type: UDP over IPv4 Src IP addr: 1.1.1.1 mask: 0.0.0.0 Dest IP addr: 0.0.0.0 mask: 255.255.255.255 TOS: 0x0 mask: 0xff Src port: 0 mask: 0xffff Dest port: 0 mask: 0xffff Action: Drop Reviewed-by: Michael Chan Signed-off-by: Joe Damato Link: https://patch.msgid.link/20260131003042.2570434-1-joe@dama.to Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: hide CONFIG_DETECT_HUNG_TASK specific code

2026-02-19T15:29:51Z

commit 8ff6175139967cd17b2a62bca4b2de2559942b7e upstream. The CONFIG_DEFAULT_HUNG_TASK_TIMEOUT setting is only available when the hung task detection is enabled, otherwise the code now produces a build failure: drivers/net/ethernet/broadcom/bnxt/bnxt.c:10188:21: error: use of undeclared identifier 'CONFIG_DEFAULT_HUNG_TASK_TIMEOUT' 10188 | max_tmo_secs > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT) { Enclose this warning logic in an #ifdef to ensure this builds. Fixes: 0fcad44a86bd ("bnxt_en: Change FW message timeout warning") Signed-off-by: Arnd Bergmann Reviewed-by: Michael Chan Link: https://patch.msgid.link/20250423162827.2189658-1-arnd@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bnxt_en: Change FW message timeout warning

2026-02-19T15:29:51Z

commit 0fcad44a86bdc2b5f202d91ba1eeeee6fceb7b25 upstream. The firmware advertises a "hwrm_cmd_max_timeout" value to the driver for NVRAM and coredump related functions that can take tens of seconds to complete. The driver polls for the operation to complete under mutex and may trigger hung task watchdog warning if the wait is too long. To warn the user about this, the driver currently prints a warning if this advertised value exceeds 40 seconds: Device requests max timeout of %d seconds, may trigger hung task watchdog Initially, we chose 40 seconds, well below the kernel's default CONFIG_DEFAULT_HUNG_TASK_TIMEOUT (120 seconds) to avoid triggering the hung task watchdog. But 60 seconds is the timeout on most production FW and cannot be reduced further. Change the driver's warning threshold to 60 seconds to avoid triggering this warning on all production devices. We also print the warning if the value exceeds CONFIG_DEFAULT_HUNG_TASK_TIMEOUT which may be set to architecture specific defaults as low as 10 seconds. Reviewed-by: Kalesh AP Reviewed-by: Pavan Chebbi Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Link: https://patch.msgid.link/20250417172448.1206107-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: bcmasp: fix early exit leak with fixed phy

2026-02-06T15:55:40Z

[ Upstream commit 6de4436bf369e1444606445e4cd5df5bcfc74b48 ] We are not deregistering the fixed phy link when hitting the early exit condition. Add the correct early exit sequence. Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Justin Chen Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20260122194001.1098859-1-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Fix potential data corruption with HW GRO/LRO

2026-01-17T15:31:23Z

[ Upstream commit ffeafa65b2b26df2f5b5a6118d3174f17bd12ec5 ] Fix the max number of bits passed to find_first_zero_bit() in bnxt_alloc_agg_idx(). We were incorrectly passing the number of long words. find_first_zero_bit() may fail to find a zero bit and cause a wrong ID to be used. If the wrong ID is already in use, this can cause data corruption. Sometimes an error like this can also be seen: bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1 Fix it by passing the correct number of bits MAX_TPA_P5. Use DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity check to warn if a bit cannot be found and reset the ring [MChan]. Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.") Reviewed-by: Ray Jui Signed-off-by: Srijit Bose Signed-off-by: Michael Chan Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

broadcom: b44: prevent uninitialized value usage

2026-01-08T09:14:01Z

[ Upstream commit 50b3db3e11864cb4e18ff099cfb38e11e7f87a68 ] On execution path with raised B44_FLAG_EXTERNAL_PHY, b44_readphy() leaves bmcr value uninitialized and it is used later in the code. Add check of this flag at the beginning of the b44_nway_reset() and exit early of the function with restarting autonegotiation if an external PHY is used. Fixes: 753f492093da ("[B44]: port to native ssb support") Reviewed-by: Jonas Gorski Reviewed-by: Andrew Lunn Signed-off-by: Alexey Simakov Reviewed-by: Michael Chan Link: https://patch.msgid.link/20251205155815.4348-1-bigalex934@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Fix XDP_TX path

2026-01-08T09:14:00Z

[ Upstream commit 0373d5c387f24de749cc22e694a14b3a7c7eb515 ] For XDP_TX action in bnxt_rx_xdp(), clearing of the event flags is not correct. __bnxt_poll_work() -> bnxt_rx_pkt() -> bnxt_rx_xdp() may be looping within NAPI and some event flags may be set in earlier iterations. In particular, if BNXT_TX_EVENT is set earlier indicating some XDP_TX packets are ready and pending, it will be cleared if it is XDP_TX action again. Normally, we will set BNXT_TX_EVENT again when we successfully call __bnxt_xmit_xdp(). But if the TX ring has no more room, the flag will not be set. This will cause the TX producer to be ahead but the driver will not hit the TX doorbell. For multi-buf XDP_TX, there is no need to clear the event flags and set BNXT_AGG_EVENT. The BNXT_AGG_EVENT flag should have been set earlier in bnxt_rx_pkt(). The visible symptom of this is that the RX ring associated with the TX XDP ring will eventually become empty and all packets will be dropped. Because this condition will cause the driver to not refill the RX ring seeing that the TX ring has forever pending XDP_TX packets. The fix is to only clear BNXT_RX_EVENT when we have successfully called __bnxt_xmit_xdp(). Fixes: 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX ring structures") Reported-by: Pavel Dubovitsky Reviewed-by: Andy Gospodarek Reviewed-by: Pavan Chebbi Reviewed-by: Kalesh AP Signed-off-by: Michael Chan Reviewed-by: Jacob Keller Link: https://patch.msgid.link/20251203003024.2246699-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()

2025-11-13T20:34:38Z

[ Upstream commit 46010d43ab7b18fbc8a3a0bf4d65c775f8d2adbd ] If 'force' is false, it will keep the memory pages and all data structures for the context memory type if the memory is valid. This patch always passes true for the 'force' parameter so there is no change in behavior. Later patches will adjust the 'force' parameter for the FW log context memory types so that the logs will not be reset after FW reset. Signed-off-by: Hongguang Gao Signed-off-by: Michael Chan Link: https://patch.msgid.link/20241115151438.550106-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Stable-dep-of: 5204943a4c6e ("bnxt_en: Fix warning in bnxt_dl_reload_down()") Signed-off-by: Sasha Levin