kernel.git/drivers/net/ethernet/broadcom, branch linux-5.5.y

bnxt_en: Reset rings if ring reservation fails during open()

2020-04-01T08:59:49Z

[ Upstream commit 5d765a5e4bd7c368e564e11402bba74cf7f03ac1 ] If ring counts are not reset when ring reservation fails, bnxt_init_dflt_ring_mode() will not be called again to reinitialise IRQs when open() is called and results in system crash as napi will also be not initialised. This patch fixes it by resetting the ring counts. Fixes: 47558acd56a7 ("bnxt_en: Reserve rings at driver open if none was reserved at probe time.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Free context memory after disabling PCI in probe error path.

2020-04-01T08:59:49Z

[ Upstream commit 62bfb932a51f6d08eb409248e69f8d6428c2cabd ] Other shutdown code paths will always disable PCI first to shutdown DMA before freeing context memory. Do the same sequence in the error path of probe to be safe and consistent. Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Return error if bnxt_alloc_ctx_mem() fails.

2020-04-01T08:59:49Z

[ Upstream commit 0b5b561cea32d5bb1e0a82d65b755a3cb5212141 ] The current code ignores the return value from bnxt_hwrm_func_backing_store_cfg(), causing the driver to proceed in the init path even when this vital firmware call has failed. Fix it by propagating the error code to the caller. Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: fix memory leaks in bnxt_dcbnl_ieee_getets()

2020-04-01T08:59:49Z

[ Upstream commit 62d4073e86e62e316bea2c53e77db10418fd5dd7 ] The allocated ieee_ets structure goes out of scope without being freed, leaking memory. Appropriate result codes should be returned so that callers do not rely on invalid data passed by reference. Also cache the ETS config retrieved from the device so that it doesn't need to be freed. The balance of the code was clearly written with the intent of having the results of querying the hardware cached in the device structure. The commensurate store was evidently missed though. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Fix Priority Bytes and Packets counters in ethtool -S.

2020-04-01T08:59:48Z

[ Upstream commit a24ec3220f369aa0b94c863b6b310685a727151c ] There is an indexing bug in determining these ethtool priority counters. Instead of using the queue ID to index, we need to normalize by modulo 10 to get the index. This index is then used to obtain the proper CoS queue counter. Rename bp->pri2cos to bp->pri2cos_idx to make this more clear. Fixes: e37fed790335 ("bnxt_en: Add ethtool -S priority counters.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: keep MAC in reset until PHY is up

2020-04-01T08:59:48Z

[ Upstream commit 88f6c8bf1aaed5039923fb4c701cab4d42176275 ] As noted in commit 28c2d1a7a0bf ("net: bcmgenet: enable loopback during UniMAC sw_reset") the UniMAC must be clocked at least 5 cycles while the sw_reset is asserted to ensure a clean reset. That commit enabled local loopback to provide an Rx clock from the GENET sourced Tx clk. However, when connected in MII mode the Tx clk is sourced by the PHY so if an EPHY is not supplying clocks (e.g. when the link is down) the UniMAC does not receive the necessary clocks. This commit extends the sw_reset window until the PHY reports that the link is up thereby ensuring that the clocks are being provided to the MAC to produce a clean reset. One consequence is that if the system attempts to enter a Wake on LAN suspend state when the PHY link has not been active the MAC may not have had a chance to initialize cleanly. In this case, we remove the sw_reset and enable the WoL reception path as normal with the hope that the PHY will provide the necessary clocks to drive the WoL blocks if the link becomes active after the system has entered suspend. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Revert "net: bcmgenet: use RGMII loopback for MAC reset"

2020-04-01T08:59:48Z

[ Upstream commit 612eb1c3b9e504de24136c947ed7c07bc342f3aa ] This reverts commit 3a55402c93877d291b0a612d25edb03d1b4b93ac. This is not a good solution when connecting to an external switch that may not support the isolation of the TXC signal resulting in output driver contention on the pin. A different solution is necessary. Signed-off-by: Doug Berger Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed

2020-03-21T07:15:49Z

[ Upstream commit 402482a6a78e5c61d8a2ec6311fc5b4aca392cd6 ] Outdated Raspberry Pi 4 firmware might configure the external PHY as rgmii although the kernel currently sets it as rgmii-rxid. This makes connections unreliable as ID_MODE_DIS is left enabled. To avoid this, explicitly clear that bit whenever we don't need it. Fixes: da38802211cc ("net: bcmgenet: Add RGMII_RXID support") Signed-off-by: Nicolas Saenz Julienne Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: fix error handling when flashing from file

2020-03-18T06:18:59Z

[ Upstream commit 22630e28f9c2b55abd217869cc0696def89f2284 ] After bnxt_hwrm_do_send_message() was updated to return standard error codes in a recent commit, a regression in bnxt_flash_package_from_file() was introduced. The return value does not properly reflect all possible firmware errors when calling firmware to flash the package. Fix it by consolidating all errors in one local variable rc instead of having 2 variables for different errors. Fixes: d4f1420d3656 ("bnxt_en: Convert error code in firmware message response to standard code.") Signed-off-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: reinitialize IRQs when MTU is modified

2020-03-18T06:18:59Z

[ Upstream commit a9b952d267e59a3b405e644930f46d252cea7122 ] MTU changes may affect the number of IRQs so we must call bnxt_close_nic()/bnxt_open_nic() with the irq_re_init parameter set to true. The reason is that a larger MTU may require aggregation rings not needed with smaller MTU. We may not be able to allocate the required number of aggregation rings and so we reduce the number of channels which will change the number of IRQs. Without this patch, it may crash eventually in pci_disable_msix() when the IRQs are not properly unwound. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman