kernel.git/drivers/net/ethernet/broadcom, branch linux-5.12.y

net: bcmgenet: check return value after calling platform_get_resource()

2021-07-19T08:00:55Z

[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bcmgenet: Fix attaching to PYH failed on RPi 4B

2021-07-14T15:00:01Z

[ Upstream commit b2ac9800cfe0f8da16abc4e74e003440361c112e ] The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late. So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads GENET fail to attach the PHY as following log: bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 ... could not attach to PHY bcmgenet fd580000.ethernet eth0: failed to connect to PHY uart-pl011 fe201000.serial: no DMA platform data libphy: bcmgenet MII bus: probed ... unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus This patch adds the soft dependency to load mdio-bcm-unimac module before genet module to avoid the issue. Fixes: 9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485 Signed-off-by: Jian-Hong Pan Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: broadcom: bcm4908_enet: reset DMA rings sw indexes properly

2021-07-14T14:59:59Z

[ Upstream commit ddeacc4f6494e07cbb6f033627926623f3e7a9d0 ] Resetting software indexes in bcm4908_dma_alloc_buf_descs() is not enough as it's called during device probe only. Driver resets DMA on every .ndo_open callback and it's required to reset indexes then. This fixes inconsistent rings state and stalled traffic after interface down & up sequence. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error path

2021-06-23T12:44:02Z

[ Upstream commit 03400aaa69f916a376e11526cf591901a96a3a5c ] bnxt_ethtool_init() may have allocated some memory and we need to call bnxt_ethtool_free() to properly unwind if bnxt_init_one() fails. Fixes: 7c3809181468 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.") Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Fix TQM fastpath ring backing store computation

2021-06-23T12:44:02Z

[ Upstream commit c12e1643d2738bcd4e26252ce531878841dd3f38 ] TQM fastpath ring needs to be sized to store both the requester and responder side of RoCE QPs in TQM for supporting bi-directional tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of 2 when computing the number of entries for TQM fastpath ring. This fixes an RX pipeline stall issue when running bi-directional max RoCE QP tests. Fixes: c7dd7ab4b204 ("bnxt_en: Improve TQM ring context memory sizing formulas.") Signed-off-by: Rukhsana Ansari Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Rediscover PHY capabilities after firmware reset

2021-06-23T12:44:02Z

[ Upstream commit 0afd6a4e8028cc487c240b6cfe04094e45a306e4 ] There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to rediscover the PHY capabilities after a firmware reset. This can cause some PHY related functionalities to fail after a firmware reset. For example, in multi-host, the ability for any host to configure the PHY settings may be lost after a firmware reset. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnx2x: Fix missing error code in bnx2x_iov_init_one()

2021-06-16T10:05:03Z

[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ] Eliminate the follow smatch warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Fix context memory setup for 64K page size.

2021-06-03T07:09:47Z

[ Upstream commit 702279d2ce4650000bb6302013630304e359dc13 ] There was a typo in the code that checks for 64K BNXT_PAGE_SHIFT in bnxt_hwrm_set_pg_attr(). Fix it and make the code more understandable with a new macro BNXT_SET_CTX_PAGE_ATTR(). Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.") Reviewed-by: Edwin Peer Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnxt_en: Include new P5 HV definition in VF check.

2021-06-03T07:09:47Z

[ Upstream commit ab21494be9dc7d62736c5fcd06be65d49df713ee ] Otherwise, some of the recently added HyperV VF IDs would not be recognized as VF devices and they would not initialize properly. Fixes: 7fbf359bb2c1 ("bnxt_en: Add PCI IDs for Hyper-V VF devices.") Reviewed-by: Edwin Peer Signed-off-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bnx2: Fix error return code in bnx2_init_board()

2021-06-03T07:09:47Z

[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ] Fix to return -EPERM from the error handling case instead of 0, as done elsewhere in this function. Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.") Reported-by: Hulk Robot Signed-off-by: Zhen Lei Reviewed-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin