kernel.git/drivers/net/ethernet/broadcom, branch linux-5.10.y

bnxt_en: Fix potential data corruption with HW GRO/LRO

2026-01-19T12:12:11Z

[ Upstream commit ffeafa65b2b26df2f5b5a6118d3174f17bd12ec5 ] Fix the max number of bits passed to find_first_zero_bit() in bnxt_alloc_agg_idx(). We were incorrectly passing the number of long words. find_first_zero_bit() may fail to find a zero bit and cause a wrong ID to be used. If the wrong ID is already in use, this can cause data corruption. Sometimes an error like this can also be seen: bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1 Fix it by passing the correct number of bits MAX_TPA_P5. Use DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity check to warn if a bit cannot be found and reset the ring [MChan]. Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.") Reviewed-by: Ray Jui Signed-off-by: Srijit Bose Signed-off-by: Michael Chan Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

eth: bnxt: move and rename reset helpers

2026-01-19T12:12:11Z

[ Upstream commit fea2993aecd74d5d11ede1ebbd60e478ebfed996 ] Move the reset helpers, subsequent patches will need some of them on the Tx path. While at it rename bnxt_sched_reset(), on more recent chips it schedules a queue reset, instead of a fuller reset. Link: https://lore.kernel.org/r/20230720010440.1967136-2-kuba@kernel.org Reviewed-by: Michael Chan Signed-off-by: Jakub Kicinski Stable-dep-of: ffeafa65b2b2 ("bnxt_en: Fix potential data corruption with HW GRO/LRO") Signed-off-by: Sasha Levin

broadcom: b44: prevent uninitialized value usage

2026-01-19T12:11:42Z

[ Upstream commit 50b3db3e11864cb4e18ff099cfb38e11e7f87a68 ] On execution path with raised B44_FLAG_EXTERNAL_PHY, b44_readphy() leaves bmcr value uninitialized and it is used later in the code. Add check of this flag at the beginning of the b44_nway_reset() and exit early of the function with restarting autonegotiation if an external PHY is used. Fixes: 753f492093da ("[B44]: port to native ssb support") Reviewed-by: Jonas Gorski Reviewed-by: Andrew Lunn Signed-off-by: Alexey Simakov Reviewed-by: Michael Chan Link: https://patch.msgid.link/20251205155815.4348-1-bigalex934@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tg3: prevent use of uninitialized remote_adv and local_adv variables

2025-10-29T13:01:19Z

[ Upstream commit 0c3f2e62815a43628e748b1e4ad97a1c46cce703 ] Some execution paths that jump to the fiber_setup_done label could leave the remote_adv and local_adv variables uninitialized and then use it. Initialize this variables at the point of definition to avoid this. Fixes: 85730a631f0c ("tg3: Add SGMII phy support for 5719/5718 serdes") Co-developed-by: Alexandr Sapozhnikov Signed-off-by: Alexandr Sapozhnikov Signed-off-by: Alexey Simakov Reviewed-by: Pavan Chebbi Link: https://patch.msgid.link/20251014164736.5890-1-bigalex934@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: correct offset handling for IPv6 destination address

2025-10-02T11:35:45Z

[ Upstream commit 3d3aa9472c6dd0704e9961ed4769caac5b1c8d52 ] In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6 destination values to the source address field (saddr) when processing pedit offsets within the destination address range. This patch corrects the assignment to use daddr instead of saddr, ensuring that pedit operations on IPv6 destination addresses are applied correctly. Fixes: 9b9eb518e338 ("bnxt_en: Add support for NAT(L3/L4 rewrite)") Signed-off-by: Alok Tiwari Reviewed-by: Somnath Kotur Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

cnic: Fix use-after-free bugs in cnic_delete_task

2025-10-02T11:35:41Z

[ Upstream commit cfa7d9b1e3a8604afc84e9e51d789c29574fb216 ] The original code uses cancel_delayed_work() in cnic_cm_stop_bnx2x_hw(), which does not guarantee that the delayed work item 'delete_task' has fully completed if it was already running. Additionally, the delayed work item is cyclic, the flush_workqueue() in cnic_cm_stop_bnx2x_hw() only blocks and waits for work items that were already queued to the workqueue prior to its invocation. Any work items submitted after flush_workqueue() is called are not included in the set of tasks that the flush operation awaits. This means that after the cyclic work items have finished executing, a delayed work item may still exist in the workqueue. This leads to use-after-free scenarios where the cnic_dev is deallocated by cnic_free_dev(), while delete_task remains active and attempt to dereference cnic_dev in cnic_delete_task(). A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) cnic_netdev_event() | cnic_stop_hw() | cnic_delete_task() cnic_cm_stop_bnx2x_hw() | ... cancel_delayed_work() | /* the queue_delayed_work() flush_workqueue() | executes after flush_workqueue()*/ | queue_delayed_work() cnic_free_dev(dev)//free | cnic_delete_task() //new instance | dev = cp->dev; //use Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the cyclic delayed work item is properly canceled and that any ongoing execution of the work item completes before the cnic_dev is deallocated. Furthermore, since cancel_delayed_work_sync() uses __flush_work(work, true) to synchronously wait for any currently executing instance of the work item to finish, the flush_workqueue() becomes redundant and should be removed. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated the cnic PCI device in QEMU and introduced intentional delays — such as inserting calls to ssleep() within the cnic_delete_task() function — to increase the likelihood of triggering the bug. Fixes: fdf24086f475 ("cnic: Defer iscsi connection cleanup") Signed-off-by: Duoming Zhou Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT

2025-07-17T16:27:59Z

[ Upstream commit 3cdf199d4755d477972ee87110b2aebc88b3cfad ] When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur Signed-off-by: Michael Chan Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Fix DCB ETS validation

2025-07-17T16:27:59Z

[ Upstream commit b74c2a2e9cc471e847abd87e50a2354c07e02040 ] In bnxt_ets_validate(), the code incorrectly loops over all possible traffic classes to check and add the ETS settings. Fix it to loop over the configured traffic classes only. The unconfigured traffic classes will default to TSA_ETS with 0 bandwidth. Looping over these unconfigured traffic classes may cause the validation to fail and trigger this error message: "rejecting ETS config starving a TC\n" The .ieee_setets() will then fail. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy Signed-off-by: Shravya KN Signed-off-by: Michael Chan Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

bnxt_en: Fix ethtool -d byte order for 32-bit values

2025-06-04T12:36:52Z

[ Upstream commit 02e8be5a032cae0f4ca33c6053c44d83cf4acc93 ] For version 1 register dump that includes the PCIe stats, the existing code incorrectly assumes that all PCIe stats are 64-bit values. Fix it by using an array containing the starting and ending index of the 32-bit values. The loop in bnxt_get_regs() will use the array to do proper endian swap for the 32-bit values. Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'") Reviewed-by: Shruti Parab Reviewed-by: Kalesh AP Reviewed-by: Andy Gospodarek Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

tg3: Disable tg3 PCIe AER on system reboot

2025-03-13T11:47:04Z

[ Upstream commit e0efe83ed325277bb70f9435d4d9fc70bebdcca8 ] Disable PCIe AER on the tg3 device on system reboot on a limited list of Dell PowerEdge systems. This prevents a fatal PCIe AER event on the tg3 device during the ACPI _PTS (prepare to sleep) method for S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep() as part of the kernel's reboot sequence as a result of commit 38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot"). There was an earlier fix for this problem by commit 2ca1c94ce0b6 ("tg3: Disable tg3 device on system reboot to avoid triggering AER"). But it was discovered that this earlier fix caused a reboot hang when some Dell PowerEdge servers were booted via ipxe. To address this reboot hang, the earlier fix was essentially reverted by commit 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF"). This re-exposed the tg3 PCIe AER on reboot problem. This fix is not an ideal solution because the root cause of the AER is in system firmware. Instead, it's a targeted work-around in the tg3 driver. Note also that the PCIe AER must be disabled on the tg3 device even if the system is configured to use "firmware first" error handling. V3: - Fix sparse warning on improper comparison of pdev->current_state - Adhere to netdev comment style Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF") Signed-off-by: Lenny Szubowicz Reviewed-by: Pavan Chebbi Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin