kernel.git/drivers/net/ethernet/broadcom, branch linux-4.20.y

bnxt_en: Drop oversize TX packets to prevent errors.

2019-03-10T06:10:11Z

[ Upstream commit 2b3c6885386020b1b9d92d45e8349637e27d1f66 ] There have been reports of oversize UDP packets being sent to the driver to be transmitted, causing error conditions. The issue is likely caused by the dst of the SKB switching between 'lo' with 64K MTU and the hardware device with a smaller MTU. Patches are being proposed by Mahesh Bandewar to fix the issue. In the meantime, add a quick length check in the driver to prevent the error. The driver uses the TX packet size as index to look up an array to setup the TX BD. The array is large enough to support all MTU sizes supported by the driver. The oversize TX packet causes the driver to index beyond the array and put garbage values into the TX BD. Add a simple check to prevent this. Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Disable interrupts when allocating CP rings or NQs.

2019-02-12T19:02:34Z

[ Upstream commit 5e66e35aab335b83d9ffb220d8a3a13986a7a60e ] When calling firmware to allocate a CP ring or NQ, an interrupt associated with that ring may be generated immediately before the doorbell is even setup after the firmware call returns. When servicing the interrupt, the driver may crash when trying to access the doorbell. Fix it by disabling interrupt on that vector until the doorbell is set up. Fixes: 697197e5a173 ("bnxt_en: Re-structure doorbells.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: systemport: Fix WoL with password after deep sleep

2019-02-12T19:02:33Z

[ Upstream commit 8dfb8d2cceb76b74ad5b58cc65c75994329b4d5e ] Broadcom STB chips support a deep sleep mode where all register contents are lost. Because we were stashing the MagicPacket password into some of these registers a suspend into that deep sleep then a resumption would not lead to being able to wake-up from MagicPacket with password again. Fix this by keeping a software copy of the password and program it during suspend. Fixes: 83e82f4c706b ("net: systemport: add Wake-on-LAN support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Disable MSIX before re-reserving NQs/CMPL rings.

2019-02-12T19:02:22Z

[ Upstream commit 36d65be9a88052cdfc8524eb591baf0e6c878408 ] When bringing up a device, the code checks to see if the number of MSIX has changed. pci_disable_msix() should be called first before changing the number of reserved NQs/CMPL rings. This ensures that the MSIX vectors associated with the NQs/CMPL rings are still properly mapped when pci_disable_msix() masks the vectors. This patch will prevent errors when RDMA support is added for the new 57500 chips. When the RDMA driver shuts down, the number of NQs is decreased and we must use the new sequence to prevent MSIX errors. Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw

2019-01-09T16:45:49Z

[ Upstream commit 38355a5f9a22bfa5bd5b1bb79805aca39fa53729 ] This happened when I tried to boot normal Fedora 29 system with latest available kernel (from fedora rawhide, plus some unrelated custom patches): BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 PGD 0 P4D 0 Oops: 0010 [#1] SMP PTI CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1 Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018 RIP: 0010: (null) Code: Bad RIP value. RSP: 0018:ffffa47ccdc9fbe0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000003e8 RCX: ffffa47ccdc9fbf8 RDX: ffffa47ccdc9fc00 RSI: ffff97d9ee7b01f8 RDI: ffff97d9f0150b80 RBP: ffff97d9f0150b80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff97d9ef1e53e8 R14: 0000000000000009 R15: ffff97d9f0ac6730 FS: 00007f4d224ef700(0000) GS:ffff97d9fa200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000011ece52006 CR4: 00000000000206e0 Call Trace: ? bnx2x_chip_cleanup+0x195/0x610 [bnx2x] ? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x] ? bnx2x_reload_if_running+0x24/0x40 [bnx2x] ? bnx2x_set_features+0x79/0xa0 [bnx2x] ? __netdev_update_features+0x244/0x9e0 ? netlink_broadcast_filtered+0x136/0x4b0 ? netdev_update_features+0x22/0x60 ? dev_disable_lro+0x1c/0xe0 ? devinet_sysctl_forward+0x1c6/0x211 ? proc_sys_call_handler+0xab/0x100 ? __vfs_write+0x36/0x1a0 ? rcu_read_lock_sched_held+0x79/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x14c/0x1b0 ? vfs_write+0x159/0x1c0 ? vfs_write+0xba/0x1c0 ? ksys_write+0x52/0xc0 ? do_syscall_64+0x60/0x1f0 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe After some investigation I figured out that recently added cleanup code tries to call VLAN filtering de-initialization function which exist only for newer hardware. Corresponding function pointer is not set (== 0) for older hardware, namely these chips: #define CHIP_NUM_57710 0x164e #define CHIP_NUM_57711 0x164f #define CHIP_NUM_57711E 0x1650 And I have one of those in my test system: Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650] Function bnx2x_init_vlan_mac_fp_objs() from drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not. This regression was introduced after v4.20-rc7, and still exists in v4.20 release. Fixes: 04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by: Ivan Mironov Signed-off-by: Ivan Mironov Acked-by: Sudarsana Kalluru Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bnxt_en: Fix ethtool self-test loopback.

2018-12-19T19:31:09Z

The current code has 2 problems. It assumes that the RX ring for the loopback packet is combined with the TX ring. This is not true if the ethtool channels are set to non-combined mode. The second problem is that it won't work on 57500 chips without adjusting the logic to get the proper completion ring (cpr) pointer. Fix both issues by locating the proper cpr pointer through the RX ring. Fixes: e44758b78ae8 ("bnxt_en: Use bnxt_cp_ring_info struct pointer as parameter for RX path.") Signed-off-by: Michael Chan Signed-off-by: David S. Miller

bnx2x: Send update-svid ramrod with retry/poll flags enabled

2018-12-13T00:25:14Z

Driver sends update-SVID ramrod in the MFW notification path. If there is a pending ramrod, driver doesn't retry the command and storm firmware will never be updated with the SVID value. The patch adds changes to send update-svid ramrod in process context with retry/poll flags set. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller

bnx2x: Enable PTP only on the PF that initializes the port

2018-12-13T00:25:14Z

There will be only one PHC clock per port. PTP should be enabled only on one PF per port. The change enables PTP functionality on the PF that initializes the port. The change is useful in multi-function modes e.g., NPAR where a port can have more than one PF. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller

bnx2x: Remove configured vlans as part of unload sequence.

2018-12-13T00:25:14Z

Vlans are not getting removed when drivers are unloaded. The recent storm firmware versions had added safeguards against re-configuring an already configured vlan. As a result, PF inner reload flows (e.g., mtu change) might trigger an assertion. This change is going to remove vlans (same as we do for MACs) when doing a chip cleanup during unload. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller

bnx2x: Clear fip MAC when fcoe offload support is disabled

2018-12-13T00:25:14Z

On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE. Add a software workaround to clear the bad fip mac address if no FCoE connections are supported. Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller