kernel.git/drivers/net/ethernet/apple, branch linux-4.9.y

net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()

2023-01-07T11:07:21Z

[ Upstream commit 5fe02e046e6422c4adfdbc50206ec7186077da24 ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()

2023-01-07T11:07:21Z

[ Upstream commit 3dfe3486c1cd4f82b466b7d307f23777137b8acc ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: bmac: Fix read of MAC address from ROM

2020-06-11T07:22:19Z

[ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ] In bmac_get_station_address, We're reading two bytes at a time from ROM, but we do that six times, resulting in 12 bytes of read & writes. This means we will write off the end of the six-byte destination buffer. This change fixes the for-loop to only read/write six bytes. Based on a proposed fix from Finn Thain . Signed-off-by: Jeremy Kerr Reported-by: Stan Johnson Tested-by: Stan Johnson Reported-by: Finn Thain Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: macmace: Allow modular build

2015-09-30T04:11:13Z

Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller

drivers/net: remove all references to obsolete Ethernet-HOWTO

2015-06-23T13:50:35Z

This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller

Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2015-04-16T18:53:32Z

Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile

powerpc: Move Power Macintosh drivers to generic byteswappers

2015-03-23T03:29:40Z

ppc has special instruction forms to efficiently load and store values in non-native endianness. These can be accessed via the arch-specific {ld,st}_le{16,32}() inlines in arch/powerpc/include/asm/swab.h. However, gcc is perfectly capable of generating the byte-reversing load/store instructions when using the normal, generic cpu_to_le*() and le*_to_cpu() functions eaning the arch-specific functions don't have much point. Worse the "le" in the names of the arch specific functions is now misleading, because they always generate byte-reversing forms, but some ppc machines can now run a little-endian kernel. To start getting rid of the arch-specific forms, this patch removes them from all the old Power Macintosh drivers, replacing them with the generic byteswappers. Signed-off-by: David Gibson Signed-off-by: Benjamin Herrenschmidt

net: ethernet: apple: constify of_device_id array

2015-03-17T19:00:22Z

of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick Signed-off-by: David S. Miller

ethernet: codespell comment spelling fixes

2015-03-09T02:54:22Z

To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches Signed-off-by: David S. Miller

net: ethernet: apple: drop owner assignment from platform_drivers

2014-10-20T14:21:04Z

A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang