kernel.git/drivers/net/ethernet/amd, branch linux-6.3.y

amd-xgbe: fix the false linkup in xgbe_phy_status

2023-06-09T08:47:52Z

[ Upstream commit dc362e20cd6ab7a93d1b09669730c406f0910c35 ] In the event of a change in XGBE mode, the current auto-negotiation needs to be reset and the AN cycle needs to be re-triggerred. However, the current code ignores the return value of xgbe_set_mode(), leading to false information as the link is declared without checking the status register. Fix this by propagating the mode switch status information to xgbe_phy_status(). Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Co-developed-by: Sudheesh Mavila Signed-off-by: Sudheesh Mavila Reviewed-by: Simon Horman Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: amd: Fix link leak when verifying config failed

2023-05-11T14:17:23Z

[ Upstream commit d325c34d9e7e38d371c0a299d415e9b07f66a1fb ] After failing to verify configuration, it returns directly without releasing link, which may cause memory leak. Paolo Abeni thinks that the whole code of this driver is quite "suboptimal" and looks unmainatained since at least ~15y, so he suggests that we could simply remove the whole driver, please take it into consideration. Simon Horman suggests that the fix label should be set to "Linux-2.6.12-rc2" considering that the problem has existed since the driver was introduced and the commit above doesn't seem to exist in net/net-next. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Gan Gecen Reviewed-by: Dongliang Mu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

amd-xgbe: fix mismatched prototype

2023-02-07T06:33:18Z

The forward declaration was introduced with a prototype that does not match the function definition: drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd, enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch] 2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int, unsigned int)' 391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Ideally there should not be any forward declarations here, which would make it easier to show that there is no unbounded recursion. I tried fixing this but could not figure out how to avoid the recursive call. As a hotfix, address only the broken prototype to fix the build problem instead. Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation") Signed-off-by: Arnd Bergmann Reviewed-by: Simon Horman Acked-by: Shyam Sundar S K Link: https://lore.kernel.org/r/20230203121553.2871598-1-arnd@kernel.org Signed-off-by: Jakub Kicinski

amd-xgbe: add support for rx-adaptation

2023-02-02T14:17:19Z

The existing implementation for non-Autonegotiation 10G speed modes does not enable RX adaptation in the Driver and FW. The RX Equalization settings (AFE settings alone) are manually configured and the existing link-up sequence in the driver does not perform rx adaptation process as mentioned in the Synopsys databook. There's a customer request for 10G backplane mode without Auto-negotiation and for the DAC cables of more significant length that follow the non-Autonegotiation mode. These modes require PHY to perform RX Adaptation. The proposed logic adds the necessary changes to Yellow Carp devices to ensure seamless RX Adaptation for 10G-SFI (LONG DAC) and 10G-KR without AN (CL72 not present). The RX adaptation core algorithm is executed by firmware, however, to achieve that a new mailbox sub-command is required to be sent by the driver. Co-developed-by: Shyam Sundar S K Signed-off-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Signed-off-by: Paolo Abeni

amd-xgbe: add 2.5GbE support to 10G BaseT mode

2023-02-02T14:17:19Z

Add support to the driver to fully recognize and enable 2.5GbE speed in 10GBaseT mode. Acked-by: Shyam Sundar S K Signed-off-by: Raju Rangoju Signed-off-by: Paolo Abeni

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2023-01-20T20:28:23Z

drivers/net/ipa/ipa_interrupt.c drivers/net/ipa/ipa_interrupt.h 9ec9b2a30853 ("net: ipa: disable ipa interrupt during suspend") 8e461e1f092b ("net: ipa: introduce ipa_interrupt_enable()") d50ed3558719 ("net: ipa: enable IPA interrupt handlers separate from registration") https://lore.kernel.org/all/20230119114125.5182c7ab@canb.auug.org.au/ https://lore.kernel.org/all/79e46152-8043-a512-79d9-c3b905462774@tessares.net/ Signed-off-by: Jakub Kicinski

amd-xgbe: Replace MII_ADDR_C45 with XGBE_ADDR_C45

2023-01-18T03:34:08Z

The xgbe driver reuses MII_ADDR_C45 for its own purpose. The values derived with it are never passed to phylib or a linux MDIO bus driver. In order that MII_ADDR_C45 can be removed, add an XGBE specific Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Signed-off-by: Jakub Kicinski

amd-xgbe: Separate C22 and C45 transactions

2023-01-18T03:34:08Z

The xgbe MDIO bus driver can perform both C22 and C45 transfers, when using its MDIO bus hardware. The SFP I2C mdio bus driver only supports C22. Create separate functions for each and register the C45 versions using the new API calls where appropriate. Signed-off-by: Andrew Lunn Signed-off-by: Michael Walle Signed-off-by: Jakub Kicinski

amd-xgbe: Delay AN timeout during KR training

2023-01-13T05:50:37Z

AN restart triggered during KR training not only aborts the KR training process but also move the HW to unstable state. Driver has to wait upto 500ms or until the KR training is completed before restarting AN cycle. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Co-developed-by: Sudheesh Mavila Signed-off-by: Sudheesh Mavila Signed-off-by: Raju Rangoju Acked-by: Shyam Sundar S K Signed-off-by: Jakub Kicinski

amd-xgbe: TX Flow Ctrl Registers are h/w ver dependent

2023-01-13T05:50:37Z

There is difference in the TX Flow Control registers (TFCR) between the revisions of the hardware. The older revisions of hardware used to have single register per queue. Whereas, the newer revision of hardware (from ver 30H onwards) have one register per priority. Update the driver to use the TFCR based on the reported version of the hardware. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Co-developed-by: Ajith Nayak Signed-off-by: Ajith Nayak Signed-off-by: Raju Rangoju Acked-by: Shyam Sundar S K Signed-off-by: Jakub Kicinski