kernel.git/drivers/net/dsa, branch linux-6.12.y

net: dsa: realtek: rtl8365mb: fix rtl8365mb_phy_ocp_write return value

2026-03-13T16:20:40Z

[ Upstream commit 7cbe98f7bef965241a5908d50d557008cf998aee ] Function rtl8365mb_phy_ocp_write() always returns 0, even when an error occurs during register access. This patch fixes the return value to propagate the actual error code from regmap operations. Link: https://lore.kernel.org/netdev/a2dfde3c-d46f-434b-9d16-1e251e449068@yahoo.com/ Fixes: 2796728460b8 ("net: dsa: realtek: rtl8365mb: serialize indirect PHY register access") Signed-off-by: Mieczyslaw Nalewaj Reviewed-by: Andrew Lunn Signed-off-by: Luiz Angelo Daros de Luca Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260301-realtek_namiltd_fix1-v1-1-43a6bb707f9c@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: b53: skip multicast entries for fdb_dump()

2026-01-08T09:14:34Z

[ Upstream commit d42bce414d1c5c0b536758466a1f63ac358e613c ] port_fdb_dump() is supposed to only add fdb entries, but we iterate over the full ARL table, which also includes multicast entries. So check if the entry is a multicast entry before passing it on to the callback(). Additionally, the port of those entries is a bitmask, not a port number, so any included entries would have even be for the wrong port. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Jonas Gorski Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20251217205756.172123-1-jonas.gorski@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: xrs700x: reject unsupported HSR configurations

2025-12-18T12:55:14Z

[ Upstream commit 30296ac7642652428396222e720718f2661e9425 ] As discussed here: https://lore.kernel.org/netdev/20240620090210.drop6jwh7e5qw556@skbuf/ the fact is that the xrs700x.c driver only supports offloading HSR_PT_SLAVE_A and HSR_PT_SLAVE_B (which were the only port types at the time the offload was written, _for this driver_). Up until now, the API did not explicitly tell offloading drivers what port has what role. So xrs700x can get confused and think that it can support a configuration which it actually can't. There was a table in the attached link which gave an example: $ ip link add name hsr0 type hsr slave1 swp0 slave2 swp1 \ interlink swp2 supervision 45 version 1 HSR_PT_SLAVE_A HSR_PT_SLAVE_B HSR_PT_INTERLINK ---------------------------------------------------------------- user space 0 1 2 requests ---------------------------------------------------------------- XRS700X driver 1 2 - understands The switch would act as if the ring ports were swp1 and swp2. Now that we have explicit hsr_get_port_type() API, let's use that to work around the unintended semantical changes of the offloading API brought by the introduction of interlink ports in HSR. Fixes: 5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)") Cc: Lukasz Majewski Signed-off-by: Vladimir Oltean Reviewed-by: George McCollister Link: https://patch.msgid.link/20251130131657.65080-5-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: microchip: Free previously initialized ports on init failures

2025-12-06T21:25:03Z

[ Upstream commit 0f80e21bf6229637e193248fbd284c0ec44bc0fd ] If a port interrupt setup fails after at least one port has already been successfully initialized, the gotos miss some resource releasing: - the already initialized PTP IRQs aren't released - the already initialized port IRQs aren't released if the failure occurs in ksz_pirq_setup(). Merge 'out_girq' and 'out_ptpirq' into a single 'port_release' label. Behind this label, use the reverse loop to release all IRQ resources for all initialized ports. Jump in the middle of the reverse loop if an error occurs in ksz_ptp_irq_setup() to only release the port IRQ of the current iteration. Cc: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Signed-off-by: Bastien Curutchet (Schneider Electric) Link: https://patch.msgid.link/20251120-ksz-fix-v6-4-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: dsa: microchip: Do not execute PTP driver code for unsupported switches

2025-12-06T21:25:03Z

[ Upstream commit 6ed3472173c575cd8aaed6c62eb74f7728404ee6 ] The PTP driver code only works for certain KSZ switches like KSZ9477, KSZ9567, LAN937X and their varieties. This code is enabled by kernel configuration CONFIG_NET_DSA_MICROCHIP_KSZ_PTP. As the DSA driver is common to work with all KSZ switches this PTP code is not appropriate for other unsupported switches. The ptp_capable indication is added to the chip data structure to signal whether to execute those code. Signed-off-by: Tristram Ha Link: https://patch.msgid.link/20241218020240.70601-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski Stable-dep-of: 0f80e21bf622 ("net: dsa: microchip: Free previously initialized ports on init failures") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()

2025-12-06T21:25:03Z

[ Upstream commit d0b8fec8ae50525b57139393d0bb1f446e82ff7e ] The IRQ numbers created through irq_create_mapping() are only assigned to ptpmsg_irq[n].num at the end of the IRQ setup. So if an error occurs between their creation and their assignment (for instance during the request_threaded_irq() step), we enter the error path and fail to release the newly created virtual IRQs because they aren't yet assigned to ptpmsg_irq[n].num. Move the mapping creation to ksz_ptp_msg_irq_setup() to ensure symetry with what's released by ksz_ptp_msg_irq_free(). In the error path, move the irq_dispose_mapping to the out_ptp_msg label so it will be called only on created IRQs. Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn Signed-off-by: Bastien Curutchet (Schneider Electric) Link: https://patch.msgid.link/20251120-ksz-fix-v6-5-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

net: dsa: microchip: Don't free uninitialized ksz_irq

2025-12-06T21:25:02Z

commit 25b62cc5b22c45face094ae3e8717258e46d1d19 upstream. If something goes wrong at setup, ksz_irq_free() can be called on uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It leads to freeing uninitialized IRQ numbers and/or domains. Use dsa_switch_for_each_user_port_continue_reverse() in the error path to iterate only over the fully initialized ports. Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Signed-off-by: Bastien Curutchet (Schneider Electric) Link: https://patch.msgid.link/20251120-ksz-fix-v6-3-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: dsa: microchip: ptp: Fix checks on irq_find_mapping()

2025-12-06T21:25:01Z

commit 9e059305be41a5bd27e03458d8333cf30d70be34 upstream. irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found but it never returns a negative value. However, during the PTP IRQ setup, we verify that its returned value isn't negative. Fix the irq_find_mapping() check to enter the error path when 0 is returned. Return -EINVAL in such case. Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn Signed-off-by: Bastien Curutchet (Schneider Electric) Link: https://patch.msgid.link/20251120-ksz-fix-v6-2-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: dsa: microchip: common: Fix checks on irq_find_mapping()

2025-12-06T21:25:01Z

commit 7b3c09e1667977edee11de94a85e2593a7c15e87 upstream. irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found but it never returns a negative value. However, on each irq_find_mapping() call, we verify that the returned value isn't negative. Fix the irq_find_mapping() checks to enter error paths when 0 is returned. Return -EINVAL in such cases. CC: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Reviewed-by: Andrew Lunn Signed-off-by: Bastien Curutchet (Schneider Electric) Link: https://patch.msgid.link/20251120-ksz-fix-v6-1-891f80ae7f8f@bootlin.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic

2025-12-06T21:24:55Z

[ Upstream commit da62abaaa268357b1aa66b372ace562189a05df1 ] When using the SGMII PCS as a fixed-link chip-to-chip connection, it is easy to miss the fact that traffic passes only at 1G, since that's what any normal such connection would use. When using the SGMII PCS connected towards an on-board PHY or an SFP module, it is immediately noticeable that when the link resolves to a speed other than 1G, traffic from the MAC fails to pass: TX counters increase, but nothing gets decoded by the other end, and no local RX counters increase either. Artificially lowering a fixed-link rate to speed = <100> makes us able to see the same issue as in the case of having an SGMII PHY. Some debugging shows that the XPCS configuration is A-OK, but that the MAC Configuration Table entry for the port has the SPEED bits still set to 1000Mbps, due to a special condition in the driver. Deleting that condition, and letting the resolved link speed be programmed directly into the MAC speed field, results in a functional link at all 3 speeds. This piece of evidence, based on testing on both generations with SGMII support (SJA1105S and SJA1110A) directly contradicts the statement from the blamed commit that "the MAC is fixed at 1 Gbps and we need to configure the PCS only (if even that)". Worse, that statement is not backed by any documentation, and no one from NXP knows what it might refer to. I am unable to recall sufficient context regarding my testing from March 2020 to understand what led me to draw such a braindead and factually incorrect conclusion. Yet, there is nothing of value regarding forcing the MAC speed, either for SGMII or 2500Base-X (introduced at a later stage), so remove all such logic. Fixes: ffe10e679cec ("net: dsa: sja1105: Add support for the SGMII port") Signed-off-by: Vladimir Oltean Link: https://patch.msgid.link/20251122111324.136761-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin