kernel.git/drivers/net/dsa/ocelot, branch linux-5.17.y

net: dsa: felix: fix tagging protocol changes with multiple CPU ports

2022-04-20T07:36:18Z

[ Upstream commit 00fa91bc9cc2a9d340f963af5e457610ad4b2f9c ] When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: felix: suppress -EPROBE_DEFER errors

2022-04-20T07:36:13Z

[ Upstream commit e6934e4048c91502efcb21da92b7ae37cd8fa741 ] The DSA master might not have been probed yet in which case the probe of the felix switch fails with -EPROBE_DEFER: [ 4.435305] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 It is not an error. Use dev_err_probe() to demote this particular error to a debug message. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Michael Walle Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220408101521.281886-1-michael@walle.cc Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: felix: fix possible NULL pointer dereference

2022-04-13T17:27:06Z

[ Upstream commit 866b7a278cdb51eb158cd8513bc7438fc857804a ] As the possible failure of the allocation, kzalloc() may return NULL pointer. Therefore, it should be better to check the 'sgi' in order to prevent the dereference of NULL pointer. Fixes: 23ae3a7877718 ("net: dsa: felix: add stream gate settings for psfp"). Signed-off-by: Zheng Yongjun Reviewed-by: Vladimir Oltean Link: https://lore.kernel.org/r/20220329090800.130106-1-zhengyongjun3@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: seville: register the mdiobus under devres

2022-02-09T04:30:35Z

As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Seville VSC9959 switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the seville switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The seville driver has a code structure that could accommodate both the mdiobus_unregister and mdiobus_free calls, but it has an external dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls devm_mdiobus_alloc_size() on its behalf. So rather than restructuring that, and exporting yet one more symbol mscc_miim_teardown(), let's work with devres and replace of_mdiobus_register with the devres variant. When we use all-devres, we can ensure that devres doesn't free a still-registered bus (it either runs both callbacks, or none). Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: dsa: felix: don't use devres for mdiobus

2022-02-09T04:30:34Z

As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Felix VSC9959 switch is a PCI device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the felix switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The felix driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc_size() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: Jakub Kicinski

net: dsa: felix: add port fast age support

2022-01-08T02:58:25Z

Add support for flushing the MAC table on a given port in the ocelot switch library, and use this functionality in the felix DSA driver. This operation is needed when a port leaves a bridge to become standalone, and when the learning is disabled, and when the STP state changes to a state where no FDB entry should be present. Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20220107144229.244584-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: dsa: seville: name change for clarity from pcs to mdio_device

2022-01-02T18:48:47Z

A simple variable update from "pcs" to "mdio_device" for the mdio device will make things a little cleaner. Signed-off-by: Colin Foster Signed-off-by: David S. Miller

net: dsa: felix: name change for clarity from pcs to mdio_device

2022-01-02T18:48:47Z

Simple rename of a variable to make things more logical. Signed-off-by: Colin Foster Signed-off-by: David S. Miller

net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcs

2022-01-02T18:48:47Z

Remove references to lynx_pcs structures so drivers like the Felix DSA can reference alternate PCS drivers. Signed-off-by: Colin Foster Signed-off-by: David S. Miller

flow_offload: add index to flow_action_entry structure

2021-12-19T14:08:47Z

Add index to flow_action_entry structure and delete index from police and gate child structure. We make this change to offload tc action for driver to identify a tc action. Signed-off-by: Baowen Zheng Signed-off-by: Simon Horman Signed-off-by: David S. Miller