kernel.git/drivers/net/dsa/microchip, branch linux-6.10.y

net: dsa: microchip: fix PTP config failure when using multiple ports

2024-08-29T15:36:08Z

commit 6efea5135417ae8194485d1d05ea79a21cf1a11c upstream. When performing the port_hwtstamp_set operation, ptp_schedule_worker() will be called if hardware timestamoing is enabled on any of the ports. When using multiple ports for PTP, port_hwtstamp_set is executed for each port. When called for the first time ptp_schedule_worker() returns 0. On subsequent calls it returns 1, indicating the worker is already scheduled. Currently the ksz driver treats 1 as an error and fails to complete the port_hwtstamp_set operation, thus leaving the timestamping configuration for those ports unchanged. This patch fixes this by ignoring the ptp_schedule_worker() return value. Cc: stable@vger.kernel.org Link: https://lore.kernel.org/7aae307a-35ca-4209-a850-7b2749d40f90@martin-whitaker.me.uk Fixes: bb01ad30570b0 ("net: dsa: microchip: ptp: manipulating absolute time using ptp hw clock") Signed-off-by: Martin Whitaker Reviewed-by: Andrew Lunn Acked-by: Arun Ramadoss Link: https://patch.msgid.link/20240817094141.3332-1-foss@martin-whitaker.me.uk Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.

2024-08-14T13:34:05Z

[ Upstream commit 0411f73c13afcf619d7aa7546edbc5710a871cae ] As noted in the device errata [1-8], EEE support is not fully operational in the KSZ8567, KSZ9477, KSZ9567, KSZ9896, and KSZ9897 devices, causing link drops when connected to another device that supports EEE. The patch series "net: add EEE support for KSZ9477 switch family" merged in commit 9b0bf4f77162 caused EEE support to be enabled in these devices. A fix for this regression for the KSZ9477 alone was merged in commit 08c6d8bae48c2. This patch extends this fix to the other affected devices. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567R-Errata-DS80000752.pdf [2] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ8567S-Errata-DS80000753.pdf [3] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf [4] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567R-Errata-DS80000755.pdf [5] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9567S-Errata-DS80000756.pdf [6] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9896C-Errata-DS80000757.pdf [7] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf [8] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897S-Errata-DS80000759.pdf Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ8567/KSZ9567/KSZ9896/KSZ9897 Link: https://lore.kernel.org/netdev/137ce1ee-0b68-4c96-a717-c8164b514eec@martin-whitaker.me.uk/ Signed-off-by: Martin Whitaker Acked-by: Arun Ramadoss Reviewed-by: Oleksij Rempel Reviewed-by: Lukasz Majewski Link: https://patch.msgid.link/20240807205209.21464-1-foss@martin-whitaker.me.uk Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: microchip: Fix Wake-on-LAN check to not return an error

2024-08-14T13:34:03Z

[ Upstream commit c7a19018bd557c24072b59088ad2684fd83ea3f4 ] The wol variable in ksz_port_set_mac_address() is declared with random data, but the code in ksz_get_wol call may not be executed so the WAKE_MAGIC check may be invalid resulting in an error message when setting a MAC address after starting the DSA driver. Fixes: 3b454b6390c3 ("net: dsa: microchip: ksz9477: Add Wake on Magic Packet support") Signed-off-by: Tristram Ha Reviewed-by: Oleksij Rempel Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20240805235200.24982-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: dsa: ksz_common: Allow only up to two HSR HW offloaded ports for KSZ9477

2024-08-03T06:59:39Z

[ Upstream commit dcec8d291da8813b5e1c7c0967ae63463a8521f6 ] The KSZ9477 allows HSR in-HW offloading for any of two selected ports. This patch adds check if one tries to use more than two ports with HSR offloading enabled. The problem is with RedBox configuration (HSR-SAN) - when configuring: ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 interlink lan3 \ supervision 45 version 1 The lan1 (port0) and lan2 (port1) are correctly configured as ports, which can use HSR offloading on ksz9477. However, when we do already have two bits set in hsr_ports, we need to return (-ENOTSUPP), so the interlink port (lan3) would be used with SW based HSR RedBox support. Otherwise, I do see some strange network behavior, as some HSR frames are visible on non-HSR network and vice versa. This causes the switch connected to interlink port (lan3) to drop frames and no communication is possible. Moreover, conceptually - the interlink (i.e. HSR-SAN port - lan3/port2) shall be only supported in software as it is also possible to use ksz9477 with only SW based HSR (i.e. port0/1 -> hsr0 with offloading, port2 -> HSR-SAN/interlink, port4/5 -> hsr1 with SW based HSR). Fixes: 5055cccfc2d1 ("net: hsr: Provide RedBox support (HSR-SAN)") Signed-off-by: Lukasz Majewski Reviewed-by: Andrew Lunn Reviewed-by: Dan Carpenter Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: dsa: microchip: fix wrong register write when masking interrupt

2024-06-25T11:26:25Z

The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is defined as 0x001C in ksz9477_reg.h. The designers used 32-bit value in anticipation for increase of port count in future product but currently the maximum port count is 7 and the effective value is 0x7F in register 0x001F. Each port has its own interrupt mask and is defined as 0x#01F. It uses only 4 bits for different interrupts. The developer who implemented the current interrupt mechanism in the switch driver noticed there are similarities between the mechanism to mask port interrupts in global interrupt and individual interrupts in each port and so used the same code to handle these interrupts. He updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write to 8-bit as now the mask registers are 0x1F and 0x#01F. In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X families use only 8-bit access and so this common code will eventually be changed to accommodate them. Fixes: e1add7dd6183 ("net: dsa: microchip: use common irq routines for girq and pirq") Signed-off-by: Tristram Ha Link: https://lore.kernel.org/r/1719009262-2948-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Paolo Abeni

net: dsa: microchip: monitor potential faults in half-duplex mode

2024-06-23T09:06:58Z

The errata DS80000754 recommends monitoring potential faults in half-duplex mode for the KSZ9477 family. half-duplex is not very common so I just added a critical message when the fault conditions are detected. The switch can be expected to be unable to communicate anymore in these states and a software reset of the switch would be required which I did not implement. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: microchip: use collision based back pressure mode

2024-06-23T09:06:58Z

Errata DS80000758 states that carrier sense back pressure mode can cause link down issues in 100BASE-TX half duplex mode. The datasheet also recommends to always use the collision based back pressure mode. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt Reviewed-by: Woojung Huh Acked-by: Arun Ramadoss Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: microchip: fix initial port flush problem

2024-06-21T02:31:42Z

The very first flush in any port will flush all learned addresses in all ports. This can be observed by unplugging the cable from one port while additional ports are connected and dumping the fdb entries. This problem is caused by the initially wrong value programmed to the REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit takes effect and flushes all learned entries. After that call both bits are reset and so the next port flush will not cause such problem again. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski

net: dsa: microchip: fix RGMII error in KSZ DSA driver

2024-05-30T01:44:36Z

The driver should return RMII interface when XMII is running in RMII mode. Fixes: 0ab7f6bf1675 ("net: dsa: microchip: ksz9477: use common xmii function") Signed-off-by: Tristram Ha Acked-by: Arun Ramadoss Acked-by: Jerry Ray Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/1716932066-3342-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski

net: dsa: microchip: Correct initialization order for KSZ88x3 ports

2024-05-17T19:25:22Z

Adjust the initialization sequence of KSZ88x3 switches to enable 802.1p priority control on Port 2 before configuring Port 1. This change ensures the apptrust functionality on Port 1 operates correctly, as it depends on the priority settings of Port 2. The prior initialization sequence incorrectly configured Port 1 first, which could lead to functional discrepancies. Fixes: a1ea57710c9d ("net: dsa: microchip: dcb: add special handling for KSZ88X3 family") Signed-off-by: Oleksij Rempel Reviewed-by: Hariprasad Kelam Acked-by: Arun Ramadoss Link: https://lore.kernel.org/r/20240517050121.2174412-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski