kernel.git/drivers/net/dsa/b53/b53_common.c, branch linux-4.15.y

net: dsa: b53: Turn off Broadcom tags for more switches

2018-01-04T14:57:12Z

Models such as BCM5395/97/98 and BCM53125/24/53115 and compatible require that we turn on managed mode to actually act on Broadcom tags, otherwise they just pass them through on ingress (host -> switch) and don't insert them in egress (switch -> host). Turning on managed mode is simple, but requires us to properly support ARL misses on multicast addresses which is a much more involved set of changes not suitable for a bug fix for this release. Reported-by: Jochen Friedrich Fixes: 7edc58d614d4 ("net: dsa: b53: Turn on Broadcom tags") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Support prepended Broadcom tags

2017-11-13T01:34:54Z

On BCM58xx devices (Northstar Plus), there is an accelerator attached to port 8 which would only work if we use prepended Broadcom tags. Resolve that difference in our get_tag_protocol() function by setting the appropriate tagging protocol in that case. We need to change b53_brcm_hdr_setup() a little bit now since we can deal with two types of Broadcom tags. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: Pass a port to get_tag_protocol()

2017-11-13T01:34:54Z

A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli Reviewed-by: Vivien Didelot Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: b53: Turn on Broadcom tags

2017-11-11T12:55:15Z

Enable Broadcom tags for b53 devices, except 5325 and 5365 which use a different Broadcom tag format not yet supported by net/dsa/tag_brcm.c. We also make sure that we can turn on Broadcom tags on a CPU port number that is capable of that: 5, 7 or 8. Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: b53: Stop using dev->cpu_port incorrectly

2017-11-11T12:55:15Z

dev->cpu_port is the driver local information that should only be used to look up register offsets for a particular port, when they differ (e.g: IMP port override), but it should certainly not be used in place of the DSA configured CPU port. Since the DSA switch layer calls port_vlan_{add,del}() on the CPU port as well, we can remove the specific setting of the CPU port within port_vlan_{add,del}. Fixes: ff39c2d68679 ("net: dsa: b53: Add bridge support") Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Florian Fainelli Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: dsa: b53: Have b53_hdr_setup() enable/disable tagging

2017-11-01T11:51:24Z

Have b53_hdr_setup() check what kind of tagging protocol is configured (Broadcom or none) and apply the correct settings in both cases. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: b53: Export b53_configure_vlan()

2017-10-29T03:13:30Z

bcm_sf2 and b53 replicate the same operations: clear all VLANs and set their ports to the default VLAN tag (1 for these devices) so export the b53 function doing just that. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: add dsa_is_unused_port helper

2017-10-27T15:00:09Z

As the comment above the chunk states, the b53 driver attempts to disable the unused ports. But using ds->enabled_port_mask is misleading, because this mask reports in fact the user ports. To avoid confusion and fix this, this patch introduces an explicit dsa_is_unused_port helper which ensures the corresponding bit is not masked in any of the switch port masks. Signed-off-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: dsa: add dsa_to_port helper

2017-10-18T11:24:33Z

The dsa_port structure is part of DSA core data and must only be updated by the later. It is OK and sometimes necessary for the DSA drivers to access this data, but this has to be read only. For that purpose, add a dsa_to_port() helper which returns a const pointer to a dsa_port structure which must be used by DSA drivers from now on instead of digging into ds->ports[] themselves. Signed-off-by: Vivien Didelot Signed-off-by: David S. Miller

net: dsa: use dedicated CPU port

2017-09-21T22:15:58Z

Each port in DSA has its own dedicated CPU port currently available in its parent switch's ds->ports[port].cpu_dp. Use it instead of getting the unique tree CPU port, which will be deprecated soon. Signed-off-by: Vivien Didelot Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller