kernel.git/drivers/net/can/vxcan.c, branch linux-6.9.y

rtnetlink: prepare nla_put_iflink() to run under RCU

2024-02-26T11:46:12Z

We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. This patch prepares dev_get_iflink() and nla_put_iflink() to run either with RTNL or RCU held. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

net: validate veth and vxcan peer ifindexes

2023-08-20T10:40:03Z

veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller

rtnetlink: pass netlink message header and portid to rtnl_configure_link()

2022-11-01T01:10:21Z

This patch pass netlink message header and portid to rtnl_configure_link() All the functions in this call chain need to add the parameters so we can use them in the last call rtnl_notify(), and notify the userspace about the new link info if NLM_F_ECHO flag is set. - rtnl_configure_link() - __dev_notify_flags() - rtmsg_ifinfo() - rtmsg_ifinfo_event() - rtmsg_ifinfo_build_skb() - rtmsg_ifinfo_send() - rtnl_notify() Also move __dev_notify_flags() declaration to net/core/dev.h, as Jakub suggested. Signed-off-by: Hangbin Liu Reviewed-by: Guillaume Nault Signed-off-by: Jakub Kicinski

can: dev: add CAN XL support to virtual CAN

2022-09-15T07:08:09Z

Make use of new can_skb_get_data_len() helper. Add support for variable CANXL MTU using the new can_is_canxl_dev_mtu(). Acked-by: Vincent Mailhol Signed-off-by: Oliver Hartkopp Link: https://lore.kernel.org/all/20220912170725.120748-7-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde

can: tree-wide: advertise software timestamping capabilities

2022-07-28T09:44:01Z

Currently, some CAN drivers support hardware timestamping, some do not. But userland has no method to query which features are supported (aside maybe of getting RX messages and observe whether or not hardware timestamps stay at zero). The canonical way for a network driver to advertised what kind of timestamping it supports is to implement ethtool_ops::get_ts_info(). This patch only targets the CAN drivers which *do not* support hardware timestamping. For each of those CAN drivers, implement the get_ts_info() using the generic ethtool_op_get_ts_info(). This way, userland can do: | $ ethtool --show-time-stamping canX to confirm the device timestamping capacities. N.B. the drivers which support hardware timestamping will be migrated in separate patches. Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727101641.198847-6-mailhol.vincent@wanadoo.fr [mkl: mscan: add missing mscan_ethtool_ops] Signed-off-by: Marc Kleine-Budde

can: v(x)can: add software tx timestamps

2022-07-28T07:30:36Z

TX timestamps were added to the can_put_echo_skb() function of can_dev modules in [1]. However, vcan and vxcan do not rely on that function and as such do not offer TX timestamping. While it could be arguable whether TX timestamps are really needed for virtual interfaces, we prefer to still add it so that all CAN drivers, without exception, support the software TX timestamps. Add a call to skb_tx_timestamp() in the vcan_tx() and vxcan_xmit() functions so that the modules now support TX software timestamps. [1] commit 741b91f1b0ea ("can: dev: can_put_echo_skb(): add software tx timestamps") Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=741b91f1b0ea34f00f6a7d4539b767c409291fcf Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20220727101641.198847-5-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde

can: vxcan: vxcan_xmit(): use kfree_skb() instead of kfree() to free skb

2022-03-13T08:45:35Z

This patch fixes the freeing of the "oskb", by using kfree_skb() instead of kfree(). Fixes: 1574481bb3de ("vxcan: remove sk reference in peer skb") Link: https://lore.kernel.org/all/20220311123741.382618-1-mkl@pengutronix.de Cc: Oliver Hartkopp Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Marc Kleine-Budde

vxcan: enable local echo for sent CAN frames

2022-03-10T08:23:45Z

The vxcan driver provides a pair of virtual CAN interfaces to exchange CAN traffic between different namespaces - analogue to veth. In opposite to the vcan driver the local sent CAN traffic on this interface is not echo'ed back but only sent to the remote peer. This is unusual and can be easily fixed by removing IFF_ECHO from the netdevice flags that are set for vxcan interfaces by default at startup. Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed in af_can.c in can_send(). This patch makes vxcan interfaces adopt the same local echo behavior and procedures as known from the vcan interfaces. Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Link: https://lore.kernel.org/all/20220309120416.83514-5-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

vxcan: remove sk reference in peer skb

2022-03-10T08:23:45Z

With can_create_echo_skb() the skb which is forwarded to the peer CAN interface shares the sk pointer from the originating socket. This makes the CAN frame show up in the peer namespace as a TX packet. With the use of skb_clone() analogue to the handling in gw.c the peer skb gets a new start in the peer namespace and correctly appears as a RX packet. Link: https://lore.kernel.org/all/20220309120416.83514-4-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: Use netif_rx().

2022-03-06T11:05:31Z

Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Marc Kleine-Budde Cc: Oliver Hartkopp Cc: Wolfgang Grandegger Cc: linux-can@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Acked-by: Oliver Hartkopp Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller