kernel.git/drivers/net/can/usb, branch linux-6.5.y

can: etas_es58x: add missing a blank line after declaration

2023-11-20T10:56:50Z

[ Upstream commit 4f8005092cafc194ba6a8e5f39626ba0b9f08271 ] Fix below checkpatch warning: WARNING: Missing a blank line after declarations #2233: FILE: drivers/net/can/usb/etas_es58x/es58x_core.c:2233: + int ret = es58x_init_netdev(es58x_dev, ch_idx); + if (ret) { Fixes: d8f26fd689dd ("can: etas_es58x: remove es58x_get_product_info()") Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20230924110914.183898-3-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: etas_es58x: rework the version check logic to silence -Wformat-truncation

2023-11-20T10:56:50Z

[ Upstream commit 107e6f6fe6f38577baecf0e01f517c8607a3a625 ] Following [1], es58x_devlink.c now triggers the following format-truncation GCC warnings: drivers/net/can/usb/etas_es58x/es58x_devlink.c: In function ‘es58x_devlink_info_get’: drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:41: warning: ‘%02u’ directive output may be truncated writing between 2 and 3 bytes into a region of size between 1 and 3 [-Wformat-truncation=] 201 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u", | ^~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:30: note: directive argument in the range [0, 255] 201 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u", | ^~~~~~~~~~~~~~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:201:3: note: ‘snprintf’ output between 9 and 12 bytes into a destination of size 9 201 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 202 | fw_ver->major, fw_ver->minor, fw_ver->revision); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:41: warning: ‘%02u’ directive output may be truncated writing between 2 and 3 bytes into a region of size between 1 and 3 [-Wformat-truncation=] 211 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u", | ^~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:30: note: directive argument in the range [0, 255] 211 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u", | ^~~~~~~~~~~~~~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:211:3: note: ‘snprintf’ output between 9 and 12 bytes into a destination of size 9 211 | snprintf(buf, sizeof(buf), "%02u.%02u.%02u", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 212 | bl_ver->major, bl_ver->minor, bl_ver->revision); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:38: warning: ‘%03u’ directive output may be truncated writing between 3 and 5 bytes into a region of size between 2 and 4 [-Wformat-truncation=] 221 | snprintf(buf, sizeof(buf), "%c%03u/%03u", | ^~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:30: note: directive argument in the range [0, 65535] 221 | snprintf(buf, sizeof(buf), "%c%03u/%03u", | ^~~~~~~~~~~~~ drivers/net/can/usb/etas_es58x/es58x_devlink.c:221:3: note: ‘snprintf’ output between 9 and 13 bytes into a destination of size 9 221 | snprintf(buf, sizeof(buf), "%c%03u/%03u", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 222 | hw_rev->letter, hw_rev->major, hw_rev->minor); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is not an actual bug because the sscanf() parsing makes sure that the u8 are only two digits long and the u16 only three digits long. Thus below declaration: char buf[max(sizeof("xx.xx.xx"), sizeof("axxx/xxx"))]; allocates just what is needed to represent either of the versions. This warning was known but ignored because, at the time of writing, -Wformat-truncation was not present in the kernel, not even at W=3 [2]. One way to silence this warning is to check the range of all sub version numbers are valid: [0, 99] for u8 and range [0, 999] for u16. The module already has a logic which considers that when all the sub version numbers are zero, the version number is not set. Note that not having access to the device specification, this was an arbitrary decision. This logic can thus be removed in favor of global check that would cover both cases: - the version number is not set (parsing failed) - the version number is not valid (paranoiac check to please gcc) Before starting to parse the product info string, set the version sub-numbers to the maximum unsigned integer thus violating the definitions of struct es58x_sw_version or struct es58x_hw_revision. Then, rework the es58x_sw_version_is_set() and es58x_hw_revision_is_set() functions: remove the check that the sub-numbers are non zero and replace it by a check that they fit in the expected number of digits. This done, rename the functions to reflect the change and rewrite the documentation. While doing so, also add a description of the return value. Finally, the previous version only checked that &es58x_hw_revision.letter was not the null character. Replace this check by an alphanumeric character check to make sure that we never return a special character or a non-printable one and update the documentation of struct es58x_hw_revision accordingly. All those extra checks are paranoid but have the merit to silence the newly introduced W=1 format-truncation warning [1]. [1] commit 6d4ab2e97dcf ("extrawarn: enable format and stringop overflow warnings in W=1") Link: https://git.kernel.org/torvalds/c/6d4ab2e97dcf [2] https://lore.kernel.org/all/CAMZ6Rq+K+6gbaZ35SOJcR9qQaTJ7KR0jW=XoDKFkobjhj8CHhw@mail.gmail.com/ Reported-by: Marc Kleine-Budde Closes: https://lore.kernel.org/linux-can/20230914-carrousel-wrecker-720a08e173e9-mkl@pengutronix.de/ Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()") Signed-off-by: Vincent Mailhol Link: https://lore.kernel.org/all/20230924110914.183898-2-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM

2023-09-13T07:53:04Z

[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ] In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented. Fix this by first incrementing the error counters and then allocate the skb. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

2023-07-20T09:12:45Z

After an initial link up the CAN device is in ERROR-ACTIVE mode. Due to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to STOPPED after a link down: | ip link set dev can0 up | ip link set dev can0 down | ip --details link show can0 | 13: can0: mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can state ERROR-ACTIVE restart-ms 1000 Add missing assignment of CAN_STATE_STOPPED in gs_can_close(). Cc: stable@vger.kernel.org Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-fix-can-state-v1-1-f19738ae2c23@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: gs_usb: fix time stamp counter initialization

2023-07-17T10:16:35Z

If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Closes: https://github.com/candle-usb/candleLight_fw/issues/137#issuecomment-1623532076 Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-2-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: gs_usb: gs_can_open(): improve error handling

2023-07-17T10:16:15Z

The gs_usb driver handles USB devices with more than 1 CAN channel. The RX path for all channels share the same bulk endpoint (the transmitted bulk data encodes the channel number). These per-device resources are allocated and submitted by the first opened channel. During this allocation, the resources are either released immediately in case of a failure or the URBs are anchored. All anchored URBs are finally killed with gs_usb_disconnect(). Currently, gs_can_open() returns with an error if the allocation of a URB or a buffer fails. However, if usb_submit_urb() fails, the driver continues with the URBs submitted so far, even if no URBs were successfully submitted. Treat every error as fatal and free all allocated resources immediately. Switch to goto-style error handling, to prepare the driver for more per-device resource allocation. Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-1-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde

can: esd_usb: Use consistent prefix ESD_USB_ for macros

2023-06-22T07:40:34Z

Rename the following macros: - ESD_RTR to ESD_USB_RTR - ESD_EV_CAN_ERROR_EXT to ESD_USB_EV_CAN_ERROR_EXT Additionally remove the double newline trailing to definition of ESD_USB_RTR. Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/r/20230523173105.3175086-3-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde

can: esd_usb: Make use of kernel macros BIT() and GENMASK()

2023-06-22T07:40:34Z

Make use of kernel macros BIT() and GENMASK(). Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/r/20230523173105.3175086-2-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde

can: esd_usb: Don't bother the user with nonessential log message

2023-06-22T07:38:24Z

Replace a netdev_info(), emitting an informational message about the BTR value to be send to the controller, with a debug message by means of netdev_dbg(). Link: https://lore.kernel.org/all/20230509-superglue-hazy-38108aa66bfa-mkl@pengutronix.de/ Suggested-by: Marc Kleine-Budde Suggested-by: Vincent MAILHOL Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/r/20230519195600.420644-7-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde

can: esd_usb: Replace hardcoded message length given to USB commands

2023-06-22T07:38:24Z

Replace all hardcoded values supplied to the len element of esd_usb_msg (and its siblings) by more readable expressions, based on sizeof(), offsetof(), etc. Also spend documentation / comments that the len element of esd_usb_msg is in multiples of 32bit words and not in bytes. Link: https://lore.kernel.org/all/CAMZ6RqLaDNy-fZ2G0+QMhUEckkXLL+ZyELVSDFmqpd++aBzZQg@mail.gmail.com/ Suggested-by: Vincent MAILHOL Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/r/20230519195600.420644-6-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde