kernel.git/drivers/net/can/usb, branch linux-6.4.y

can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM

2023-09-13T07:48:02Z

[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ] In case of an RX overflow error from the CAN controller and an OOM where no skb can be allocated, the error counters are not incremented. Fix this by first incrementing the error counters and then allocate the skb. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED

2023-08-03T08:26:03Z

commit f8a2da6ec2417cca169fa85a8ab15817bccbb109 upstream. After an initial link up the CAN device is in ERROR-ACTIVE mode. Due to a missing CAN_STATE_STOPPED in gs_can_close() it doesn't change to STOPPED after a link down: | ip link set dev can0 up | ip link set dev can0 down | ip --details link show can0 | 13: can0: mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10 | link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0 | can state ERROR-ACTIVE restart-ms 1000 Add missing assignment of CAN_STATE_STOPPED in gs_can_close(). Cc: stable@vger.kernel.org Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20230718-gs_usb-fix-can-state-v1-1-f19738ae2c23@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: fix time stamp counter initialization

2023-07-27T06:56:37Z

commit 5886e4d5ecec3e22844efed90b2dd383ef804b3a upstream. If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. Fixes: 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") Closes: https://github.com/candle-usb/candleLight_fw/issues/137#issuecomment-1623532076 Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-2-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: gs_can_open(): improve error handling

2023-07-27T06:56:37Z

commit 2603be9e8167ddc7bea95dcfab9ffc33414215aa upstream. The gs_usb driver handles USB devices with more than 1 CAN channel. The RX path for all channels share the same bulk endpoint (the transmitted bulk data encodes the channel number). These per-device resources are allocated and submitted by the first opened channel. During this allocation, the resources are either released immediately in case of a failure or the URBs are anchored. All anchored URBs are finally killed with gs_usb_disconnect(). Currently, gs_can_open() returns with an error if the allocation of a URB or a buffer fails. However, if usb_submit_urb() fails, the driver continues with the URBs submitted so far, even if no URBs were successfully submitted. Treat every error as fatal and free all allocated resources immediately. Switch to goto-style error handling, to prepare the driver for more per-device resource allocation. Cc: stable@vger.kernel.org Cc: John Whittington Link: https://lore.kernel.org/all/20230716-gs_usb-fix-time-stamp-counter-v1-1-9017cefcd9d5@pengutronix.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

kvaser_usb: convert USB IDs to hexadecimal values

2023-04-04T14:48:45Z

USB IDs are usually represented in 16 bit hexadecimal values. To match the common representation in lsusb and for searching USB IDs in the internet convert the decimal values to lowercase hexadecimal. changes since v1: https://lore.kernel.org/all/20230327175344.4668-1-socketcan@hartkopp.net - drop the aligned block indentation (suggested by Jimmy) - use lowercase hex values (suggested by Alex) Signed-off-by: Oliver Hartkopp Acked-by: Jimmy Assarsson Reviewed-by: Alexander Dahl Link: https://lore.kernel.org/all/20230329090915.3127-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde

can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING

2023-04-04T14:48:45Z

Announce that the driver supports CAN_CTRLMODE_BERR_REPORTING by means of priv->can.ctrlmode_supported. Until now berr reporting always has been active without taking care of the berr-reporting parameter given to an "ip link set ..." command. Additionally apply some changes to function esd_usb_rx_event(): - If berr reporting is off and it is also no state change, then immediately return. - Unconditionally (even in case of the above "immediate return") store tx- and rx-error counters, so directly use priv->bec.txerr and priv->bec.rxerr instead of intermediate variables. - Not directly related, but to better point out the linkage between a failed alloc_can_err_skb() and stats->rx_dropped++: Move the increment of the rx_dropped statistic counter (back) to directly behind the err_skb allocation. Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/all/20230330184446.2802135-1-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde

can: esd_usb: Improve code readability by means of replacing struct esd_usb_msg with a union

2023-03-24T18:12:38Z

As suggested by Vincent Mailhol, declare struct esd_usb_msg as a union instead of a struct. Then replace all msg->msg.something constructs, that make use of esd_usb_msg, with simpler and prettier looking msg->something variants. Link: https://lore.kernel.org/all/CAMZ6RqKRzJwmMShVT9QKwiQ5LJaQupYqkPkKjhRBsP=12QYpfA@mail.gmail.com/ Suggested-by: Vincent MAILHOL Signed-off-by: Frank Jungclaus Reviewed-by: Vincent Mailhol Link: https://lore.kernel.org/all/20230222163754.3711766-1-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde

can: esd_usb: Improve readability on decoding ESD_EV_CAN_ERROR_EXT messages

2023-02-16T19:59:48Z

As suggested by Marc introduce a union plus a struct ev_can_err_ext for easier decoding of an ESD_EV_CAN_ERROR_EXT event message (which simply is a rx_msg with some dedicated data). Suggested-by: Marc Kleine-Budde Link: https://lore.kernel.org/linux-can/20220621071152.ggyhrr5sbzvwpkpx@pengutronix.de/ Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/all/20230216190450.3901254-4-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde

can: esd_usb: Make use of can_change_state() and relocate checking skb for NULL

2023-02-16T19:59:48Z

Start a rework initiated by Vincents remarks "You should not report the greatest of txerr and rxerr but the one which actually increased." [1] and "As far as I understand, those flags should be set only when the threshold is reached" [2] . Therefore make use of can_change_state() to (among others) set the flags CAN_ERR_CRTL_[RT]X_WARNING and CAN_ERR_CRTL_[RT]X_PASSIVE, maintain CAN statistic counters for error_warning, error_passive and bus_off. Relocate testing alloc_can_err_skb() for NULL to the end of esd_usb_rx_event(), to have things like can_bus_off(), can_change_state() working even in out of memory conditions. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus Link: [1] https://lore.kernel.org/all/CAMZ6RqKGBWe15aMkf8-QLf-cOQg99GQBebSm+1wEzTqHgvmNuw@mail.gmail.com/ Link: [2] https://lore.kernel.org/all/CAMZ6Rq+QBO1yTX_o6GV0yhdBj-RzZSRGWDZBS0fs7zbSTy4hmA@mail.gmail.com/ Link: https://lore.kernel.org/all/20230216190450.3901254-3-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde

can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a bus error

2023-02-16T19:59:47Z

Move the supply for cf->data[3] (bit stream position of CAN error), in case of a bus- or protocol-error, outside of the "switch (ecc & SJA1000_ECC_MASK){}"-statement, because this bit stream position is independent of the error type. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde