kernel.git/drivers/net/can/usb, branch linux-5.3.y

can: ucan: fix non-atomic allocation in completion handler

2019-12-13T07:49:38Z

commit 870db5d1015c8bd63e93b579e857223c96249ff7 upstream. USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable # 4.19 Cc: Jakob Unterwurzacher Cc: Martin Elshuber Cc: Philipp Tomsich Signed-off-by: Johan Hovold Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: peak_usb: report bus recovery as well

2019-12-04T21:33:32Z

[ Upstream commit 128a1b87d3ceb2ba449d5aadb222fe22395adeb0 ] While the state changes are reported when the error counters increase and decrease, there is no event when the bus recovers and the error counters decrease again. So add those as well. Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING -> ERROR_ACTIVE instead of directly to ERROR_ACTIVE again. Signed-off-by: Jeroen Hofstee Cc: Stephane Grosjean Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: peak_usb: fix slab info leak

2019-11-12T18:27:23Z

commit f7a1337f0d29b98733c8824e165fca3371d7d4fd upstream. Fix a small slab info leak due to a failure to clear the command buffer at allocation. The first 16 bytes of the command buffer are always sent to the device in pcan_usb_send_cmd() even though only the first two may have been initialised in case no argument payload is provided (e.g. when waiting for a response). Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Cc: stable # 3.4 Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com Signed-off-by: Johan Hovold Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: mcba_usb: fix use-after-free on disconnect

2019-11-12T18:27:22Z

commit 4d6636498c41891d0482a914dd570343a838ad79 upstream. The driver was accessing its driver data after having freed it. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: stable # 4.12 Cc: Remigiusz Kołłątaj Reported-by: syzbot+e29b17e5042bbc56fae9@syzkaller.appspotmail.com Signed-off-by: Johan Hovold Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: gs_usb: gs_can_open(): prevent memory leak

2019-11-12T18:27:20Z

commit fb5be6a7b4863ecc44963bb80ca614584b6c7817 upstream. In gs_can_open() if usb_submit_urb() fails the allocated urb should be released. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: linux-stable Signed-off-by: Navid Emamdoost Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: peak_usb: fix a potential out-of-sync while decoding packets

2019-11-12T18:27:19Z

commit de280f403f2996679e2607384980703710576fed upstream. When decoding a buffer received from PCAN-USB, the first timestamp read in a packet is a 16-bit coded time base, and the next ones are an 8-bit offset to this base, regardless of the type of packet read. This patch corrects a potential loss of synchronization by using a timestamp index read from the buffer, rather than an index of received data packets, to determine on the sizeof the timestamp to be read from the packet being decoded. Signed-off-by: Stephane Grosjean Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part") Cc: linux-stable Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

can: usb_8dev: fix use-after-free on disconnect

2019-11-12T18:27:17Z

commit 3759739426186a924675651b388d1c3963c5710e upstream. The driver was accessing its driver data after having freed it. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Cc: stable # 3.9 Cc: Bernd Krumboeck Cc: Wolfgang Grandegger Signed-off-by: Johan Hovold Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-08-07T00:11:59Z

Pull networking fixes from David Miller: "Yeah I should have sent a pull request last week, so there is a lot more here than usual: 1) Fix memory leak in ebtables compat code, from Wenwen Wang. 2) Several kTLS bug fixes from Jakub Kicinski (circular close on disconnect etc.) 3) Force slave speed check on link state recovery in bonding 802.3ad mode, from Thomas Falcon. 4) Clear RX descriptor bits before assigning buffers to them in stmmac, from Jose Abreu. 5) Several missing of_node_put() calls, mostly wrt. for_each_*() OF loops, from Nishka Dasgupta. 6) Double kfree_skb() in peak_usb can driver, from Stephane Grosjean. 7) Need to hold sock across skb->destructor invocation, from Cong Wang. 8) IP header length needs to be validated in ipip tunnel xmit, from Haishuang Yan. 9) Use after free in ip6 tunnel driver, also from Haishuang Yan. 10) Do not use MSI interrupts on r8169 chips before RTL8168d, from Heiner Kallweit. 11) Upon bridge device init failure, we need to delete the local fdb. From Nikolay Aleksandrov. 12) Handle erros from of_get_mac_address() properly in stmmac, from Martin Blumenstingl. 13) Handle concurrent rename vs. dump in netfilter ipset, from Jozsef Kadlecsik. 14) Setting NETIF_F_LLTX on mac80211 causes complete breakage with some devices, so revert. From Johannes Berg. 15) Fix deadlock in rxrpc, from David Howells. 16) Fix Kconfig deps of enetc driver, we must have PHYLIB. From Yue Haibing. 17) Fix mvpp2 crash on module removal, from Matteo Croce. 18) Fix race in genphy_update_link, from Heiner Kallweit. 19) bpf_xdp_adjust_head() stopped working with generic XDP when we fixes generic XDP to support stacked devices properly, fix from Jesper Dangaard Brouer. 20) Unbalanced RCU locking in rt6_update_exception_stamp_rt(), from David Ahern. 21) Several memory leaks in new sja1105 driver, from Vladimir Oltean" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (214 commits) net: dsa: sja1105: Fix memory leak on meta state machine error path net: dsa: sja1105: Fix memory leak on meta state machine normal path net: dsa: sja1105: Really fix panic on unregistering PTP clock net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well net: dsa: sja1105: Fix broken learning with vlan_filtering disabled net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() net: sched: sample: allow accessing psample_group with rtnl net: sched: police: allow accessing police->params with rtnl net: hisilicon: Fix dma_map_single failed on arm64 net: hisilicon: fix hip04-xmit never return TX_BUSY net: hisilicon: make hip04_tx_reclaim non-reentrant tc-testing: updated vlan action tests with batch create/delete net sched: update vlan action for batched events operations net: stmmac: tc: Do not return a fragment entry net: stmmac: Fix issues when number of Queues >= 4 net: stmmac: xgmac: Fix XGMAC selftests be2net: disable bh with spin_lock in be_process_mcc net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER ...

can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices

2019-08-02T11:58:01Z

Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by: Tomas Bortoli Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack") Cc: linux-stable Signed-off-by: Marc Kleine-Budde

can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices

2019-08-02T11:57:48Z

Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by: Tomas Bortoli Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Cc: linux-stable Signed-off-by: Marc Kleine-Budde