kernel.git/drivers/net/can/Makefile, branch linux-3.16.y

can: xilinx CAN controller support

2014-05-26T07:36:31Z

This patch adds xilinx CAN controller support. This driver supports both ZYNQ CANPS and Soft IP AXI CAN controller. Signed-off-by: Kedareswara rao Appana Signed-off-by: Marc Kleine-Budde

can: add Renesas R-Car CAN driver

2014-05-19T07:38:23Z

Add support for the CAN controller found in Renesas R-Car SoCs. Signed-off-by: Sergei Shtylyov Signed-off-by: Marc Kleine-Budde

can: move SPI drivers into a separate directory

2014-04-24T20:54:16Z

Create a directory for all CAN drivers using SPI and move mcp251x driver there. Signed-off-by: Stefano Babic Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: add tx/rx LED trigger support

2013-01-26T15:58:59Z

This patch implements the functions to add two LED triggers, named -tx and -rx, to a canbus device driver. Triggers are called from specific handlers by each CAN device driver and can be disabled altogether with a Kconfig option. The implementation keeps the LED on when the interface is UP and blinks the LED on network activity at a configurable rate. This only supports can-dev based drivers, as it uses some support field in the can_priv structure. Supported drivers should call devm_can_led_init() and can_led_event() as needed. Cleanup is handled automatically by devres, so no *_exit function is needed. Supported events are: - CAN_LED_EVENT_OPEN: turn on tx/rx LEDs - CAN_LED_EVENT_STOP: turn off tx/rx LEDs - CAN_LED_EVENT_TX: trigger tx LED blink - CAN_LED_EVENT_RX: trigger tx LED blink Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Signed-off-by: Fabio Baltieri Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde

can: grcan: Add device driver for GRCAN and GRHCAN cores

2012-11-15T19:47:26Z

This driver supports GRCAN and CRHCAN CAN controllers available in the GRLIB VHDL IP core library. Signed-off-by: Andreas Larsson Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

can: cc770: add driver core for the Bosch CC770 and Intel AN82527

2011-12-01T18:09:31Z

Signed-off-by: Wolfgang Grandegger Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller

can: Revert outdated cc770 driver patches.

2011-11-30T21:01:46Z

Newer versions have been floating about, and I applied to older variant unfortunately. Signed-off-by: David S. Miller

can: cc770: add driver core for the Bosch CC770 and Intel AN82527

2011-11-29T23:38:47Z

Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller

can: c_can: Added support for Bosch C_CAN controller

2011-02-14T06:51:44Z

Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma Signed-off-by: David S. Miller

can: add driver for Softing card

2011-01-22T04:15:17Z

This patch adds a driver for the platform:softing device. This will create (up to) 2 CAN network devices from 1 platform:softing device Signed-off-by: Kurt Van Dijck Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller