kernel.git/drivers/net/arm/etherh.c, branch linux-2.6.33.y

[ARM] RiscPC: Fix etherh oops

2009-02-22T12:40:06Z

The 8390 driver was structured by Al Viro to allow the flexibility required by platforms. lib8390.c contains the core code which drivers explicitly include: - 8390.c includes lib8390.c to provide the standard ISA based driver. - etherh.c includes it with the accessors defined for RiscPC platforms, where it is addressed via the MMIO accessors with a device dependent register spacing. Other platform drivers do something similar. However, b9a9b4b caused the kernel to contain not only the etherh private build of lib8390 (included in etherh.c) but also lib8390.c itself, and referred the new net_device_ops methods to the ISA version. The result of this is is not pretty: Unable to handle kernel paging request at virtual address 12032030 pgd = c8330000 [12032030] *pgd=00000000 Internal error: Oops: 18331805 [#1] Modules linked in: ipv6 CPU: 0 Not tainted (2.6.29-rc3 #167) PC is at do_set_multicast_list+0xd0/0x190 LR is at bitrev32+0x28/0x34 pc : [] lr : [] psr: a0000093 sp : c8321d9c ip : c8321d84 fp : c8321dbc r10: c80c6800 r9 : 00000000 r8 : c80c6b60 r7 : c80c6b80 r6 : cc80c800 r5 : c80c6800 r4 : 00000000 r3 : cc80c80c r2 : 00000004 r1 : 00000007 r0 : e0000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user ... Fix up b9a9b4b by making etherh's net_device_ops refer to the internal lib8390 functions, and remove the build of the ISA 8390.c driver. Acked-by: David S. Miller Signed-off-by: Russell King

[ARM] etherh: continue fixing build failure

2009-01-28T10:19:52Z

Further to 483a2b3a3182abcb7fcea986d7ea13e793bb00b1, also fix: drivers/net/arm/etherh.c:649: error: 'eth_set_mac_addr' undeclared here (not in a function) Signed-off-by: Russell King

ARM etherh: Fix build failure.

2009-01-14T22:35:15Z

Reported by Russell King: drivers/net/arm/etherh.c:649: error: unknown field 'ndo_set_mac_addr' specified in initializer Signed-off-by: David S. Miller

netdev: add missing set_mac_address hook

2009-01-11T08:06:36Z

Many drivers lost the ability to set ethernet address accidently during the net_device_ops conversion. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

etherh: build fix for net-next

2008-12-02T22:52:25Z

Fix build of ARM etherh driver with new net_device_ops. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller

net: convert print_mac to %pM

2008-10-28T00:06:18Z

This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

arm: bus_id -> dev_name() and dev_set_name() conversions

2008-07-22T04:55:03Z

Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman

[ARM] rpc: etherh: fix unused variable warning

2008-07-03T13:25:56Z

Fix: drivers/net/arm/etherh.c:650: warning: unused variable `i' Signed-off-by: Russell King

[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()

2007-10-10T23:51:42Z

This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches Signed-off-by: David S. Miller

[NET]: Nuke SET_MODULE_OWNER macro.

2007-10-10T23:51:13Z

It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle Signed-off-by: Jeff Garzik Signed-off-by: David S. Miller