kernel.git/drivers/net/amt.c, branch linux-5.16.y

amt: fix wrong return type of amt_send_membership_update()

2022-01-27T11:02:02Z

[ Upstream commit dd3ca4c5184ea98e40acb8eb293d85b88ea04ee2 ] amt_send_membership_update() would return -1 but it's return type is bool. So, it should be used TRUE instead of -1. Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface") Reported-by: kernel test robot Signed-off-by: Taehee Yoo Link: https://lore.kernel.org/r/20220109163702.6331-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

amt: cancel delayed_work synchronously in amt_fini()

2021-11-17T03:14:12Z

When the amt module is being removed, it calls cancel_delayed_work() to cancel pending delayed_work. But this function doesn't wait for canceling delayed_work. So, workers can be still doing after module delete. In order to avoid this, cancel_delayed_work_sync() should be used instead. Suggested-by: Jakub Kicinski Fixes: bc54e49c140b ("amt: add multicast(IGMP) report message handler") Signed-off-by: Taehee Yoo Link: https://lore.kernel.org/r/20211116160923.25258-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski

amt: use cancel_delayed_work() instead of flush_delayed_work() in amt_fini()

2021-11-10T03:12:56Z

When the amt module is being removed, it calls flush_delayed_work() to exit source_gc_wq. But it wouldn't be exited properly because the amt_source_gc_work(), which is the callback function of source_gc_wq internally calls mod_delayed_work() again. So, amt_source_gc_work() would be called after the amt module is removed. Therefore kernel panic would occur. In order to avoid it, cancel_delayed_work() should be used instead of flush_delayed_work(). Test commands: modprobe amt modprobe -rv amt Splat looks like: BUG: unable to handle page fault for address: fffffbfff80f50db #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1237ee067 P4D 1237ee067 PUD 1237b2067 PMD 100c11067 PTE 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0+ #27 5a0ebebc29fe5c40c68bea90197606c3a832b09f RIP: 0010:run_timer_softirq+0x221/0xfc0 Code: 00 00 4c 89 e1 4c 8b 30 48 c1 e9 03 80 3c 29 00 0f 85 ed 0b 00 00 4d 89 34 24 4d 85 f6 74 19 49 8d 7e 08 48 89 f9 48 c1 e9 03 <80> 3c 29 00 0f 85 fa 0b 00 00 4d 89 66 08 83 04 24 01 49 89 d4 48 RSP: 0018:ffff888119009e50 EFLAGS: 00010806 RAX: ffff8881191f8a80 RBX: 00000000007ffe2a RCX: 1ffffffff80f50db RDX: ffff888119009ed0 RSI: 0000000000000008 RDI: ffffffffc07a86d8 RBP: dffffc0000000000 R08: ffff8881191f8280 R09: ffffed102323f061 R10: ffff8881191f8307 R11: ffffed102323f060 R12: ffff888119009ec8 R13: 00000000000000c0 R14: ffffffffc07a86d0 R15: ffff8881191f82e8 FS: 0000000000000000(0000) GS:ffff888119000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80f50db CR3: 00000001062dc002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? add_timer+0x650/0x650 ? kvm_clock_read+0x14/0x30 ? ktime_get+0xb9/0x180 ? rcu_read_lock_held_common+0xe/0xa0 ? rcu_read_lock_sched_held+0x56/0xc0 ? rcu_read_lock_bh_held+0xa0/0xa0 ? hrtimer_interrupt+0x271/0x790 __do_softirq+0x1d0/0x88f irq_exit_rcu+0xe7/0x120 sysvec_apic_timer_interrupt+0x8a/0xb0 [ ... ] Fixes: bc54e49c140b ("amt: add multicast(IGMP) report message handler") Signed-off-by: Taehee Yoo Link: https://lore.kernel.org/r/20211108145340.17208-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski

amt: remove duplicate include in amt.c

2021-11-05T14:24:37Z

'net/protocol.h' included in 'drivers/net/amt.c' is duplicated. Reported-by: Zeal Robot Signed-off-by: Zhang Mingyu Signed-off-by: David S. Miller

amt: Fix NULL but dereferenced coccicheck error

2021-11-05T10:45:03Z

Eliminate the following coccicheck warning: ./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced. Reported-by: Abaci Robot Signed-off-by: Yang Li Signed-off-by: David S. Miller

amt: Remove duplicate include

2021-11-03T11:06:55Z

Clean up the following includecheck warning: ./drivers/net/amt.c: net/protocol.h is included more than once. Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Reviewed-by: Taehee Yoo Signed-off-by: David S. Miller

amt: fix error return code in amt_init()

2021-11-03T02:15:52Z

Return error code when alloc_workqueue() fails in amt_init(). Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Reviewed-by: Taehee Yoo Link: https://lore.kernel.org/r/20211102130353.1666999-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski

amt: add mld report message handler

2021-11-01T13:36:09Z

In the previous patch, igmp report handler was added. That handler can be used for mld too. So, it uses that common code to parse mld report message. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

amt: add multicast(IGMP) report message handler

2021-11-01T13:36:08Z

amt 'Relay' interface manages multicast groups(igmp/mld) and sources. In order to manage, it should have the function to parse igmp/mld report messages. So, this adds the logic for parsing igmp report messages and saves them on their own data structure. struct amt_group_node means one group(igmp/mld). struct amt_source_node means one source. The same source can't exist in the same group. The same group can exist in the same tunnel because it manages the host address too. The group information is used when forwarding multicast data. If there are no groups in the specific tunnel, Relay doesn't forward it. Although Relay manages sources, it doesn't support the source filtering feature. Because the reason to manage sources is just that in order to manage group more correctly. In the next patch, MLD part will be added. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller

amt: add data plane of amt interface

2021-11-01T13:36:08Z

Before forwarding multicast traffic, the amt interface establishes between gateway and relay. In order to establish, amt defined some message type and those message flow looks like the below. Gateway Relay ------- ----- : Request : [1] | N | |---------------------->| | Membership Query | [2] | N,MAC,gADDR,gPORT | |<======================| [3] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR,gPORT |<-----------------() | | *IP Packet(S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- ~ ~ ~ Request ~ [4] | N' | |---------------------->| | Membership Query | [5] | N',MAC',gADDR',gPORT' | |<======================| [6] | | | Teardown | | N,MAC,gADDR,gPORT | |---------------------->| | | [7] | Membership Update | | ({G:INCLUDE({S})}) | |======================>| | | ---------------------:-----------------------:--------------------- | | | | | | *Multicast Data | *IP Packet(S,G) | | | gADDR',gPORT' |<-----------------() | | *IP Packet (S,G) |<======================| | | ()<-----------------| | | | | | | ---------------------:-----------------------:--------------------- | | : : 1. Discovery - Sent by Gateway to Relay - To find Relay unique ip address 2. Advertisement - Sent by Relay to Gateway - Contains the unique IP address 3. Request - Sent by Gateway to Relay - Solicit to receive 'Query' message. 4. Query - Sent by Relay to Gateway - Contains General Query message. 5. Update - Sent by Gateway to Relay - Contains report message. 6. Multicast Data - Sent by Relay to Gateway - encapsulated multicast traffic. 7. Teardown - Not supported at this time. Except for the Teardown message, it supports all messages. In the next patch, IGMP/MLD logic will be added. Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller