kernel.git/drivers/mtd/nand, branch linux-5.16.y

mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init

2022-04-08T12:06:16Z

[ Upstream commit fecbd4a317c95d73c849648c406bcf1b6a0ec1cf ] The reference counting issue happens in several error handling paths on a refcounted object "nc->dmac". In these paths, the function simply returns the error code, forgetting to balance the reference count of "nc->dmac", increased earlier by dma_request_channel(), which may cause refcount leaks. Fix it by decrementing the refcount of specific object in those error paths. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Co-developed-by: Xiyu Yang Signed-off-by: Xiyu Yang Co-developed-by: Xin Tan Signed-off-by: Xin Tan Signed-off-by: Xin Xiong Reviewed-by: Claudiu Beznea Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220304085330.3610-1-xiongx18@fudan.edu.cn Signed-off-by: Sasha Levin

mtd: rawnand: pl353: Set the nand chip node as the flash node

2022-04-08T12:06:08Z

[ Upstream commit a1fe2ace2c39dcdc7c053705459a73b7598b1e4f ] In devicetree the flash information is embedded within nand chip node, so during nand chip initialization the nand chip node should be passed to nand_set_flash_node() api, instead of nand controller node. Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller") Signed-off-by: Amit Kumar Mahapatra Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220209053427.27676-1-amit.kumar-mahapatra@xilinx.com Signed-off-by: Sasha Levin

mtd: rawnand: gpmi: fix controller timings setting

2022-04-08T12:05:58Z

[ Upstream commit 2970bf5a32f079e1e9197411db4fe9faccb1503a ] Set the controller registers according to the real clock rate. The controller registers configuration (setup, hold, timeout, ... cycles) depends on the clock rate of the GPMI. Using the real rate instead of the ideal one, avoids that this inaccuracy (required_rate - real_rate) affects the registers setting. This patch has been tested on two custom boards with i.MX28 and i.MX6 SOCs: - i.MX28: required rate 100MHz, real rate 99.3MHz - i.MX6 required rate 100MHz, real rate 99MHz Fixes: b1206122069a ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation") Co-developed-by: Michael Trimarchi Signed-off-by: Michael Trimarchi Signed-off-by: Dario Binacchi Tested-by: Sascha Hauer Reviewed-by: Sascha Hauer Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220118095434.35081-3-dario.binacchi@amarulasolutions.com Signed-off-by: Sasha Levin

mtd: onenand: Check for error irq

2022-04-08T12:05:58Z

[ Upstream commit 3e68f331c8c759c0daa31cc92c3449b23119a215 ] For the possible failure of the platform_get_irq(), the returned irq could be error number and will finally cause the failure of the request_irq(). Consider that platform_get_irq() can now in certain cases return -EPROBE_DEFER, and the consequences of letting request_irq() effectively convert that into -EINVAL, even at probe time rather than later on. So it might be better to check just now. Fixes: 2c22120fbd01 ("MTD: OneNAND: interrupt based wait support") Signed-off-by: Jiasheng Jiang Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220104162658.1988142-1-jiasheng@iscas.ac.cn Signed-off-by: Sasha Levin

mtd: rawnand: protect access to rawnand devices while in suspend

2022-04-08T12:05:24Z

commit 8cba323437a49a45756d661f500b324fc2d486fe upstream. Prevent rawnand access while in a suspended state. Commit 013e6292aaf5 ("mtd: rawnand: Simplify the locking") allows the rawnand layer to return errors rather than waiting in a blocking wait. Tested on a iMX6ULL. Fixes: 013e6292aaf5 ("mtd: rawnand: Simplify the locking") Signed-off-by: Sean Nyekjaer Reviewed-by: Boris Brezillon Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220208085213.1838273-1-sean@geanix.com Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: ingenic: Fix missing put_device in ingenic_ecc_get

2022-02-23T11:06:05Z

[ Upstream commit ba1b71b008e97fd747845ff3a818420b11bbe830 ] If of_find_device_by_node() succeeds, ingenic_ecc_get() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code") Signed-off-by: Miaoqian Lin Reviewed-by: Paul Cercueil Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20211230072751.21622-1-linmq006@gmail.com Signed-off-by: Sasha Levin

mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status

2022-02-23T11:06:02Z

commit 36415a7964711822e63695ea67fede63979054d9 upstream. The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan Reviewed-by: Florian Fainelli Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02 Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: qcom: Fix clock sequencing in qcom_nandc_probe()

2022-02-23T11:06:02Z

commit 5c23b3f965bc9ee696bf2ed4bdc54d339dd9a455 upstream. Interacting with a NAND chip on an IPQ6018 I found that the qcomsmem NAND partition parser was returning -EPROBE_DEFER waiting for the main smem driver to load. This caused the board to reset. Playing about with the probe() function shows that the problem lies in the core clock being switched off before the nandc_unalloc() routine has completed. If we look at how qcom_nandc_remove() tears down allocated resources we see the expected order is qcom_nandc_unalloc(nandc); clk_disable_unprepare(nandc->aon_clk); clk_disable_unprepare(nandc->core_clk); dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res), DMA_BIDIRECTIONAL, 0); Tweaking probe() to both bring up and tear-down in that order removes the reset if we end up deferring elsewhere. Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver") Signed-off-by: Bryan O'Donoghue Reviewed-by: Manivannan Sadhasivam Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-2-bryan.odonoghue@linaro.org Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: gpmi: don't leak PM reference in error path

2022-02-23T11:06:00Z

commit 9161f365c91614e5a3f5c6dcc44c3b1b33bc59c0 upstream. If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped. Reported-by: Pavel Machek Fixes: f53d4c109a66 ("mtd: rawnand: gpmi: Add ERR007117 protection for nfc_apply_timings") Signed-off-by: Christian Eggers Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220125081619.6286-1-ceggers@arri.de Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: mpc5121: Remove unused variable in ads5121_select_chip()

2022-02-01T16:29:20Z

commit 33a0da68fb073360d36ce1a0e852f75fede7c21e upstream. drivers/mtd/nand/raw/mpc5121_nfc.c: In function ‘ads5121_select_chip’: drivers/mtd/nand/raw/mpc5121_nfc.c:294:19: warning: unused variable ‘mtd’ [-Wunused-variable] 294 | struct mtd_info *mtd = nand_to_mtd(nand); | ^~~ Fixes: 758b56f58b66bebc ("mtd: rawnand: Pass a nand_chip object to chip->select_chip()") Signed-off-by: Geert Uytterhoeven Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20211122132138.3899138-1-geert@linux-m68k.org Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman