kernel.git/drivers/mtd/nand/raw, branch linux-6.7.y

mtd: rawnand: Constrain even more when continuous reads are enabled

2024-04-03T13:11:28Z

[ Upstream commit 78ffbefba8d7822b232585570b293de5bc397da6 ] As a matter of fact, continuous reads require additional handling at the operation level in order for them to work properly. The core helpers do have this additional logic now, but any time a controller implements its own page helper, this extra logic is "lost". This means we need another level of per-controller driver checks to ensure they can leverage continuous reads. This is for now unsupported, so in order to ensure continuous reads are enabled only when fully using the core page helpers, we need to add more initial checks. Also, as performance is not relevant during raw accesses, we also prevent these from enabling the feature. This should solve the issue seen with controllers such as the STM32 FMC2 when in sequencer mode. In this case, the continuous read feature would be enabled but not leveraged, and most importantly not disabled, leading to further operations to fail. Reported-by: Christophe Kerello Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Tested-by: Christophe Kerello Link: https://lore.kernel.org/linux-mtd/20240307115315.1942678-1-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin

mtd: rawnand: Ensure all continuous terms are always in sync

2024-04-03T13:11:28Z

[ Upstream commit 6fb075fca63c3486612986eeff84ed4179644038 ] While crossing a LUN boundary, it is probably safer (and clearer) to keep all members of the continuous read structure aligned, including the pause page (which is the last page of the lun or the last page of the continuous read). Once these members properly in sync, we can use the rawnand_cap_cont_reads() helper everywhere to "prepare" the next continuous read if there is one. Fixes: bbcd80f53a5e ("mtd: rawnand: Prevent crossing LUN boundaries during sequential reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-4-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin

mtd: rawnand: Add a helper for calculating a page index

2024-04-03T13:11:28Z

[ Upstream commit df9803bf5a91e3599f12b53c94722f2c4e144a86 ] For LUN crossing boundaries, it is handy to know what is the index of the last page in a LUN. This helper will soon be reused. At the same time I rename page_per_lun to ppl in the calling function to clarify the lines. Cc: stable@vger.kernel.org # v6.7 Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-3-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin

mtd: rawnand: Fix and simplify again the continuous read derivations

2024-04-03T13:11:28Z

[ Upstream commit c7ee7c8d4b60fe46d4861b1200bc1c7ab657960a ] We need to avoid the first page if we don't read it entirely. We need to avoid the last page if we don't read it entirely. While rather simple, this logic has been failed in the previous fix. This time I wrote about 30 unit tests locally to check each possible condition, hopefully I covered them all. Reported-by: Christophe Kerello Closes: https://lore.kernel.org/linux-mtd/20240221175327.42f7076d@xps-13/T/#m399bacb10db8f58f6b1f0149a1df867ec086bb0a Suggested-by: Christophe Kerello Fixes: 828f6df1bcba ("mtd: rawnand: Clarify conditions to enable continuous reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Tested-by: Christophe Kerello Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-2-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin

mtd: rawnand: meson: fix scrambling mode value in command macro

2024-04-03T13:11:12Z

[ Upstream commit ef6f463599e16924cdd02ce5056ab52879dc008c ] Scrambling mode is enabled by value (1 << 19). NFC_CMD_SCRAMBLER_ENABLE is already (1 << 19), so there is no need to shift it again in CMDRWGEN macro. Signed-off-by: Arseniy Krasnov Cc: Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240210214551.441610-1-avkrasnov@salutedevices.com Signed-off-by: Sasha Levin

mtd: rawnand: lpc32xx_mlc: fix irq handler prototype

2024-03-26T22:18:39Z

[ Upstream commit 347b828882e6334690e7003ce5e2fe5f233dc508 ] clang-16 warns about mismatched function prototypes: drivers/mtd/nand/raw/lpc32xx_mlc.c:783:29: error: cast from 'irqreturn_t (*)(int, struct lpc32xx_nand_host *)' (aka 'enum irqreturn (*)(int, struct lpc32xx_nand_host *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] Change the interrupt handler to the normal way of just passing a void* pointer and converting it inside the function.. Fixes: 70f7cb78ec53 ("mtd: add LPC32xx MLC NAND driver") Signed-off-by: Arnd Bergmann Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20240213100146.455811-1-arnd@kernel.org Signed-off-by: Sasha Levin

mtd: rawnand: marvell: fix layouts

2024-03-06T14:53:55Z

commit e6a30d0c48a1e8a68f1cc413bee65302ab03ddfb upstream. The check in nand_base.c, nand_scan_tail() : has the following code: (ecc->steps * ecc->size != mtd->writesize) which fails for some NAND chips. Remove ECC entries in this driver which are not integral multiplications, and adjust the number of chunks for entries which fails the above calculation so it will calculate correctly (this was previously done automatically before the check and was removed in a later commit). Fixes: 68c18dae6888 ("mtd: rawnand: marvell: add missing layouts") Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman Signed-off-by: Miquel Raynal Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: Clarify conditions to enable continuous reads

2024-02-01T00:20:55Z

commit 828f6df1bcba7f64729166efc7086ea657070445 upstream. The current logic is probably fine but is a bit convoluted. Plus, we don't want partial pages to be part of the sequential operation just in case the core would optimize the page read with a subpage read (which would break the sequence). This may happen on the first and last page only, so if the start offset or the end offset is not aligned with a page boundary, better avoid them to prevent any risk. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal Tested-by: Martin Hundebøll Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-5-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: Prevent sequential reads with on-die ECC engines

2024-02-01T00:20:55Z

commit a62c4597953fe54c6af04166a5e2872efd0e1490 upstream. Some devices support sequential reads when using the on-die ECC engines, some others do not. It is a bit hard to know which ones will break other than experimentally, so in order to avoid such a difficult and painful task, let's just pretend all devices should avoid using this optimization when configured like this. Cc: stable@vger.kernel.org Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Signed-off-by: Miquel Raynal Tested-by: Martin Hundebøll Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-4-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: Fix core interference with sequential reads

2024-02-01T00:20:55Z

commit 7c9414c870c027737d0f2ed7b0ed10f26edb1c61 upstream. A couple of reports pointed at some strange failures happening a bit randomly since the introduction of sequential page reads support. After investigation it turned out the most likely reason for these issues was the fact that sometimes a (longer) read might happen, starting at the same page that was read previously. This is optimized by the raw NAND core, by not sending the READ_PAGE command to the NAND device and just reading out the data in a local cache. When this page is also flagged as being the starting point for a sequential read, it means the page right next will be accessed without the right instructions. The NAND chip will be confused and will not output correct data. In order to avoid such situation from happening anymore, we can however handle this case with a bit of additional logic, to postpone the initialization of the read sequence by one page. Reported-by: Alexander Shiyan Closes: https://lore.kernel.org/linux-mtd/CAP1tNvS=NVAm-vfvYWbc3k9Cx9YxMc2uZZkmXk8h1NhGX877Zg@mail.gmail.com/ Reported-by: Måns Rullgård Closes: https://lore.kernel.org/linux-mtd/yw1xfs6j4k6q.fsf@mansr.com/ Reported-by: Martin Hundebøll Closes: https://lore.kernel.org/linux-mtd/9d0c42fcde79bfedfe5b05d6a4e9fdef71d3dd52.camel@geanix.com/ Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads") Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal Tested-by: Martin Hundebøll Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-3-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman