kernel.git/drivers/mmc/host/omap.c, branch linux-4.4.y

mmc: omap: fix the maximum timeout setting

2019-04-27T07:33:50Z

[ Upstream commit a6327b5e57fdc679c842588c3be046c0b39cc127 ] When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy: MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! [ad inf.] Emulator warnings appear to be valid. The TI document SPRU680 [1] ("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card (MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253 cycles and "0xff and 0xfe cannot be used". Fix by using 0xfd as the maximum timeout. Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810 (OMAP2420) that MMC works as before. [1] http://www.ti.com/lit/ug/spru680/spru680.pdf Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver") Signed-off-by: Aaro Koskinen Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310

2018-12-21T13:09:51Z

commit e8cde625bfe8a714a856e1366bcbb259d7346095 upstream. Since v2.6.22 or so there has been reports [1] about OMAP MMC being broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage seems to have been caused by commit 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") that changed clock enabling to be done on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX the hardware doesn't seem to like it and the MMC just stops responding. Fix by memorizing the power mode and do the init only when necessary. Before the patch (on Palm TE): mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmci-omap mmci-omap.0: command timeout (CMD8) mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmcblk0: recovery failed! print_req_error: I/O error, dev mmcblk0, sector 0 Buffer I/O error on dev mmcblk0, logical block 0, async page read mmcblk0: unable to read partition table After the patch: mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmcblk0: p1 The patch is based on a fix and analysis done by Ladislav Michl. Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770) and OMAP2420 (Nokia N810). [1] https://marc.info/?t=123175197000003&r=1&w=2 Fixes: 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") Reported-by: Ladislav Michl Reported-by: Andrzej Zaborowski Tested-by: Ladislav Michl Acked-by: Tony Lindgren Signed-off-by: Aaro Koskinen Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: omap: Fix module autoload for OF platform driver

2015-10-26T14:59:58Z

This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Acked-by: Tony Lindgren Signed-off-by: Ulf Hansson

mmc: omap: fix error return code

2015-08-27T12:50:56Z

Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Ulf Hansson

mmc: omap: use for_each_sg() for scatterlist parsing

2015-08-17T09:32:42Z

See Documentation/DMA-API.txt - Part Id Signed-off-by: Fabian Frederick Signed-off-by: Ulf Hansson

mmc: remove .owner field for drivers using module_platform_driver

2014-09-09T11:59:04Z

This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: Peter Griffin Signed-off-by: Ulf Hansson

mmc: omap: Use DIV_ROUND_UP instead of open coded

2014-05-22T12:33:31Z

Also uses NSEC_PER_SEC and USEC_PER_SEC instead of hard-coded value. This makes the intention more clear. Signed-off-by: Axel Lin Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball

mmc: omap: Add erase capability

2014-02-22T18:17:42Z

This patch adds the erase capability to OMAP1/OMAP2420 MMC driver. Idea is the same than in commit 93caf8e ("omap_hsmmc: add erase capability") that we disable the data timeout interrupt for erases. Signed-off-by: Jarkko Nikula Acked-by: Tony Lindgren Tested-by: Aaro Koskinen Signed-off-by: Chris Ball

mmc: omap: Remove always set use_dma flag from struct mmc_omap_host

2014-02-22T18:17:36Z

Because use_dma is set only in mmc_omap_probe and unset nowhere there is no need to carry that flag in struct mmc_omap_host for mmc_omap_prepare_data function. Signed-off-by: Jarkko Nikula Acked-by: Tony Lindgren Tested-by: Aaro Koskinen Signed-off-by: Chris Ball

mmc: omap: Convert to devm_ioremap_resource

2014-02-22T18:17:31Z

Simplify probe and cleanup code by using devm_ioremap_resource. This also makes probe code to follow more common allocate private struct followed by other initialization style. Signed-off-by: Jarkko Nikula Acked-by: Tony Lindgren Tested-by: Aaro Koskinen Signed-off-by: Chris Ball