kernel.git/drivers/mmc/core, branch linux-5.5.y

mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command

2020-04-01T08:59:32Z

[ Upstream commit 18d200460cd73636d4f20674085c39e32b4e0097 ] The busy timeout for the CMD5 to put the eMMC into sleep state, is specific to the card. Potentially the timeout may exceed the host->max_busy_timeout. If that becomes the case, mmc_sleep() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni Cc: Link: https://lore.kernel.org/r/20200311092036.16084-1-ulf.hansson@linaro.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard

2020-04-01T08:59:31Z

[ Upstream commit 43cc64e5221cc6741252b64bc4531dd1eefb733d ] The busy timeout that is computed for each erase/trim/discard operation, can become quite long and may thus exceed the host->max_busy_timeout. If that becomes the case, mmc_do_erase() converts from using an R1B response to an R1 response, as to prevent the host from doing HW busy detection. However, it has turned out that some hosts requires an R1B response no matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note that, if the R1B gets enforced, the host becomes fully responsible of managing the needed busy timeout, in one way or the other. Suggested-by: Sowjanya Komatineni Cc: Tested-by: Anders Roxell Tested-by: Sowjanya Komatineni Tested-by: Faiz Abbas Tested-By: Peter Geis Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Allow host controllers to require R1B for CMD6

2020-04-01T08:59:31Z

[ Upstream commit 1292e3efb149ee21d8d33d725eeed4e6b1ade963 ] It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this. In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout. Suggested-by: Sowjanya Komatineni Cc: Tested-by: Anders Roxell Tested-by: Sowjanya Komatineni Tested-by: Faiz Abbas Tested-By: Peter Geis Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Rework wp-gpio handling

2020-02-19T18:54:13Z

[ Upstream commit 9073d10b098973519044f5fcdc25586810b435da ] Use MMC_CAP2_RO_ACTIVE_HIGH flag as indicator if GPIO line is to be inverted compared to DT/platform-specified polarity. The flag is not used after init in GPIO mode anyway. No functional changes intended. Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/a60f563f11bbff821da2fa2949ca82922b144860.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Fix size overflow for mmc partitions

2019-11-18T09:05:38Z

With large eMMC cards, it is possible to create general purpose partitions that are bigger than 4GB. The size member of the mmc_part struct is only an unsigned int which overflows for gp partitions larger than 4GB. Change this to a u64 to handle the overflow. Signed-off-by: Bradley Bolen Signed-off-by: Ulf Hansson

mmc: core: fix wl1251 sdio quirks

2019-11-15T08:59:19Z

wl1251 and wl1271 have different vendor id and device id. So we need to handle both with sdio quirks. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller Cc: # v4.11+ Signed-off-by: Ulf Hansson

mmc: core: Re-work HW reset for SDIO cards

2019-11-14T15:28:56Z

It have turned out that it's not a good idea to unconditionally do a power cycle and then to re-initialize the SDIO card, as currently done through mmc_hw_reset() -> mmc_sdio_hw_reset(). This because there may be multiple SDIO func drivers probed, who also shares the same SDIO card. To address these scenarios, one may be tempted to use a notification mechanism, as to allow the core to inform each of the probed func drivers, about an ongoing HW reset. However, supporting such an operation from the func driver point of view, may not be entirely trivial. Therefore, let's use a more simplistic approach to solve the problem, by instead forcing the card to be removed and re-detected, via scheduling a rescan-work. In this way, we can rely on existing infrastructure, as the func driver's ->remove() and ->probe() callbacks, becomes invoked to deal with the cleanup and the re-initialization. This solution may be considered as rather heavy, especially if a func driver doesn't share its card with other func drivers. To address this, let's keep the current immediate HW reset option as well, but run it only when there is one func driver probed for the card. Finally, to allow the caller of mmc_hw_reset(), to understand if the reset is being asynchronously managed from a scheduled work, it returns 1 (propagated from mmc_sdio_hw_reset()). If the HW reset is executed successfully and synchronously it returns 0, which maintains the existing behaviour. Reviewed-by: Douglas Anderson Tested-by: Douglas Anderson Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson

mmc: core: Drop check for mmc_card_is_removable() in mmc_rescan()

2019-11-14T15:28:56Z

Upfront in mmc_rescan() we use the host->rescan_entered flag, to allow scanning only once for non-removable cards. Therefore, it's also not possible that we can have a corresponding card bus attached (host->bus_ops is NULL), when we are scanning non-removable cards. For this reason, let' drop the check for mmc_card_is_removable() as it's redundant. Reviewed-by: Douglas Anderson Tested-by: Douglas Anderson Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson

mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response

2019-11-13T15:10:16Z

MMC IOCTLS with R1B responses may cause the card to enter the busy state, which means it's not ready to receive a new request. To prevent new requests from being sent to the card, use a CMD13 polling loop to verify that the card returns to the transfer state, before completing the request. Signed-off-by: Chaotian Jing Reviewed-by: Avri Altman Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson

mmc: block: Make card_busy_detect() a bit more generic

2019-11-13T15:10:16Z

To prepare for more users of card_busy_detect(), let's drop the struct request * as an in-parameter and convert to log the error message via dev_err() instead of pr_err(). Signed-off-by: Chaotian Jing Reviewed-by: Avri Altman Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson