kernel.git/drivers/mmc/core/sdio_ops.c, branch linux-3.2.y

mmc: sdio: Workaround for dev with broken CMD53

2011-10-26T20:32:02Z

Adds a quirk which can be turned on for SDIO devices that do not support 512 byte requests in byte mode during CMD53. These requests will always be sent in block mode instead. This patch also enables this quirk for ST-Ericsson CW1200 WLAN device. Signed-off-by: Stefan Nilsson XK Signed-off-by: Ulf HANSSON Acked-by: Linus Walleij Signed-off-by: Chris Ball

mmc: fix integer assignments to pointer

2011-10-26T19:43:35Z

Fix the sparse warning output "warning: Using plain integer as NULL pointer" Signed-off-by: Venkatraman S Signed-off-by: Chris Ball

mmc: initialize struct mmc_request at declaration time

2011-05-25T01:02:01Z

Converts from: struct mmc_request mrq; memset(&mrq, 0, sizeof(struct mmc_request)); to: struct mmc_request mrq = {0}; because it's shorter, as performant, and easier to work out whether initialization has happened. Signed-off-by: Chris Ball

mmc: initialize struct mmc_data at declaration time

2011-05-25T01:01:56Z

Converts from: struct mmc_data data; memset(&data, 0, sizeof(struct mmc_data)); to: struct mmc_data data = {0}; because it's shorter, as performant, and easier to work out whether initialization has happened. Signed-off-by: Chris Ball

mmc: initialize struct mmc_command at declaration time

2011-05-25T01:01:52Z

Converts from: struct mmc_command cmd; memset(&cmd, 0, sizeof(struct mmc_command)); to: struct mmc_command cmd = {0}; because it's shorter, as performant, and easier to work out whether initialization has happened. Signed-off-by: Chris Ball

sdio: recognize io card without powercycle

2010-03-12T23:52:28Z

SDIO Simplified Specification V2.00 states that it is strongly recommended that the host executes either a power reset or issues a CMD52 (I/O Reset) to re-initialize an I/O only card or the I/O portion of a combo card. Additionally, the CMD52 must be issued first because it cannot be issued after a CMD0. With this patch the Nintendo Wii SDIO-based WLAN card is detected after a system reset, without requiring a complete system powercycle. Signed-off-by: Albert Herranz Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sdio: check that addresses are within the address space

2009-03-24T20:30:00Z

Signed-off-by: Pierre Ossman

mmc: sdio_ops.c should #include "sdio_ops.h"

2008-04-18T18:05:33Z

Every file should include the headers containing the externs for its global functions. Signed-off-by: Adrian Bunk Signed-off-by: Pierre Ossman

cleanup asm/scatterlist.h includes

2007-11-02T07:47:06Z

Not architecture specific code should not #include . This patch therefore either replaces them with #include or simply removes them if they were unused. Signed-off-by: Adrian Bunk Signed-off-by: Jens Axboe

MMC core learns about SPI

2007-09-23T19:51:30Z

Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell Signed-off-by: Pierre Ossman