kernel.git/drivers/mmc/core/host.c, branch linux-3.1.y

mmc: core: use non-reentrant workqueue for clock gating

2011-08-31T20:25:50Z

The default multithread workqueue can cause the same work to be executed concurrently on a different CPUs. This isn't really suitable for clock gating as it might already gated the clock and gating it twice results both host->clk_old and host->ios.clock to be set to 0. To prevent this from happening we use system_nrt_wq instead. Signed-off-by: Mika Westerberg Reviewed-by: Linus Walleij Tested-by: Chris Ball Cc: Signed-off-by: Chris Ball

mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}

2011-08-31T20:24:54Z

As per suggestion by Linus Walleij: > If you think the names of the functions are confusing then > you may rename them, say like this: > > mmc_host_clk_ungate() -> mmc_host_clk_hold() > mmc_host_clk_gate() -> mmc_host_clk_release() > > Which would make the usecases more clear (This is CC'd to stable@ because the next two patches, which fix observable races, depend on it.) Signed-off-by: Mika Westerberg Reviewed-by: Linus Walleij Cc: Signed-off-by: Chris Ball

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

2011-05-25T23:55:55Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits) mmc: core: eMMC bus width may not work on all platforms mmc: sdhci: Auto-CMD23 fixes. mmc: sdhci: Auto-CMD23 support. mmc: core: Block CMD23 support for UHS104/SDXC cards. mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI. mmc: core: Use CMD23 for multiblock transfers when we can. mmc: quirks: Add/remove quirks conditional support. mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w mmc: core: duplicated trial with same freq in mmc_rescan_try_freq() mmc: core: add support for eMMC Dual Data Rate mmc: core: eMMC signal voltage does not use CMD11 mmc: sdhci-pxa: add platform code for UHS signaling mmc: sdhci: add hooks for setting UHS in platform specific code mmc: core: clear MMC_PM_KEEP_POWER flag on resume mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume mmc: sdhi: allow powering down controller with no card inserted mmc: tmio: runtime suspend the controller, where possible mmc: sdhi: support up to 3 interrupt sources mmc: sdhi: print physical base address and clock rate ...

mmc: core: fix memory leak in mmc_add_host

2011-05-25T01:00:50Z

led_trigger_register_simple() allocates memory which must not be leaked in the error-path of mmc_add_host. Move it past the only error-check in the function. Signed-off-by: Wolfram Sang Signed-off-by: Chris Ball

Revert "mmc: fix a race between card-detect rescan and clock-gate work instances"

2011-05-16T15:32:26Z

This reverts commit 26fc8775b51484d8c0a671198639c6d5ae60533e, which has been reported to cause boot/resume-time crashes for some users: https://bbs.archlinux.org/viewtopic.php?id=118751. Signed-off-by: Chris Ball Cc:

mmc: fix a race between card-detect rescan and clock-gate work instances

2011-04-27T23:16:12Z

Currently there is a race in the MMC core between a card-detect rescan work and the clock-gating work, scheduled from a command completion. Fix it by removing the dedicated clock-gating mutex and using the MMC standard locking mechanism instead. Signed-off-by: Guennadi Liakhovetski Cc: Simon Horman Cc: Magnus Damm Acked-by: Linus Walleij Cc: Signed-off-by: Chris Ball

mmc: add MMC_QUIRK_BROKEN_CLK_GATING

2011-03-15T17:48:35Z

Some sdio card are not following sdio standard, and do not work when the sdio bus's clock is gated. To keep functionnality for all legacy driver, we turn this quirk on for every sdio card. Drivers needs to disable the quirk manually when someone verifies that their supported card works with clock gating. Signed-off-by: Pierre Tardy Acked-by: Ohad Ben-Cohen Signed-off-by: Chris Ball

mmc: check for > 1 clk_requests when disabling gating

2011-01-09T04:52:22Z

Since we make sure the clock is enabled in the mmc_host_clk_exit() function we should expect a reference counter of 1, not 0. Signed-off-by: Linus Walleij Tested-by: Chris Ball Signed-off-by: Chris Ball

mmc: Aggressive clock gating framework

2011-01-09T03:48:03Z

This patch modifies the MMC core code to optionally call the set_ios() operation on the driver with the clock frequency set to 0 (gate) after a grace period of at least 8 MCLK cycles, then restore it (ungate) before any new request. This gives the driver the option to shut down the MCI clock to the MMC/SD card when the clock frequency is 0, i.e. the core has stated that the MCI clock does not need to be generated. It is inspired by existing clock gating code found in the OMAP and Atmel drivers and brings this up to the host abstraction. Gating is performed before and after any MMC request. This patchset implements this for the MMCI/PL180 MMC/SD host controller, but it should be simple to switch OMAP/Atmel over to using this instead. mmc_set_{gated,ungated}() add variable protection to the state holders for the clock gating code. This is particularly important when ordinary .set_ios() calls would race with the .set_ios() call resulting from a delayed gate operation. Signed-off-by: Linus Walleij Reviewed-by: Chris Ball Tested-by: Chris Ball Signed-off-by: Chris Ball

mmc: Remove distinction between hw and phys segments

2010-10-23T13:11:11Z

We have deprecated the distinction between hardware and physical segments in the block layer. Consolidate the two limits into one in drivers/mmc/. Signed-off-by: Martin K. Petersen Signed-off-by: Chris Ball