kernel.git/drivers/mmc/core/core.c, branch linux-5.4.y

mmc: core: Further prevent card detect during shutdown

2024-12-14T18:44:49Z

commit 87a0d90fcd31c0f36da0332428c9e1a1e0f97432 upstream. Disabling card detect from the host's ->shutdown_pre() callback turned out to not be the complete solution. More precisely, beyond the point when the mmc_bus->shutdown() has been called, to gracefully power off the card, we need to prevent card detect. Otherwise the mmc_rescan work may poll for the card with a CMD13, to see if it's still alive, which then will fail and hang as the card has already been powered off. To fix this problem, let's disable mmc_rescan prior to power off the card during shutdown. Reported-by: Anthony Pighin Fixes: 66c915d09b94 ("mmc: core: Disable card detect during shutdown") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Reviewed-by: Adrian Hunter Closes: https://lore.kernel.org/all/BN0PR08MB695133000AF116F04C3A9FFE83212@BN0PR08MB6951.namprd08.prod.outlook.com/ Tested-by: Anthony Pighin Message-ID: <20241125122446.18684-1-ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman

mmc: block: Be sure to wait while busy in CQE error recovery

2023-12-20T14:41:25Z

commit c616696a902987352426fdaeec1b0b3240949e6b upstream. STOP command does not guarantee to wait while busy, but subsequent command MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so be sure to wait by employing mmc_poll_for_busy(). Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Reviewed-by: Christian Loehle Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson Tested-by: Adrian Hunter Signed-off-by: Adrian Hunter Signed-off-by: Greg Kroah-Hartman

mmc: block: Retry commands in CQE error recovery

2023-12-08T07:44:28Z

[ Upstream commit 8155d1fa3a747baad5caff5f8303321d68ddd48c ] It is important that MMC_CMDQ_TASK_MGMT command to discard the queue is successful because otherwise a subsequent reset might fail to flush the cache first. Retry it and the previous STOP command. Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20231103084720.6886-5-adrian.hunter@intel.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: convert comma to semicolon

2023-12-08T07:44:28Z

[ Upstream commit 6b1dc6229aecbcb45e8901576684a8c09e25ad7b ] Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun Link: https://lore.kernel.org/r/20201216131737.14883-1-zhengyongjun3@huawei.com Signed-off-by: Ulf Hansson Stable-dep-of: 8155d1fa3a74 ("mmc: block: Retry commands in CQE error recovery") Signed-off-by: Sasha Levin

mmc: core: Fix ambiguous TRIM and DISCARD arg

2022-12-08T10:23:04Z

commit 489d144563f23911262a652234b80c70c89c978b upstream. Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely included DISCARD too. Fixes: b3bf915308ca ("mmc: core: new discard feature support at eMMC v4.5") Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: properly select voltage range without power cycle

2022-11-25T16:42:20Z

commit 39a72dbfe188291b156dd6523511e3d5761ce775 upstream. In mmc_select_voltage(), if there is no full power cycle, the voltage range selected at the end of the function will be on a single range (e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V), the mask shift should be reduced by 1. This issue was triggered by using a specific SD-card (Verbatim Premium 16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes and there is no power cycle. And the card was failing to switch to high-speed mode. When adding the range 3.2V/3.3V for this card with the proposed shift change, the card can switch to high-speed mode. Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards") Signed-off-by: Yann Gautier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Disable card detect during shutdown

2021-12-29T11:23:37Z

commit 66c915d09b942fb3b2b0cb2f56562180901fba17 upstream. It's seems prone to problems by allowing card detect and its corresponding mmc_rescan() work to run, during platform shutdown. For example, we may end up turning off the power while initializing a card, which potentially could damage it. To avoid this scenario, let's add ->shutdown_pre() callback for the mmc host class device and then turn of the card detect from there. Reported-by: Al Cooper Suggested-by: Adrian Hunter Signed-off-by: Ulf Hansson Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211203141555.105351-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman

mmc: core: clear flags before allowing to retune

2021-07-19T06:53:15Z

commit 77347eda64ed5c9383961d1de9165f9d0b7d8df6 upstream. It might be that something goes wrong during tuning so the MMC core will immediately trigger a retune. In our case it was: - we sent a tuning block - there was an error so we need to send an abort cmd to the eMMC - the abort cmd had a CRC error - retune was set by the MMC core This lead to a vicious circle causing a performance regression of 75%. So, clear retuning flags before we enable retuning to start with a known cleared state. Reported-by Yoshihiro Shimoda Suggested-by: Adrian Hunter Signed-off-by: Wolfram Sang Acked-by: Adrian Hunter Reviewed-by: Yoshihiro Shimoda Tested-by: Yoshihiro Shimoda Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624151616.38770-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Fix hanging on I/O during system suspend for removable cards

2021-05-11T12:04:03Z

commit 17a17bf50612e6048a9975450cf1bd30f93815b5 upstream. The mmc core uses a PM notifier to temporarily during system suspend, turn off the card detection mechanism for removal/insertion of (e)MMC/SD/SDIO cards. Additionally, the notifier may be used to remove an SDIO card entirely, if a corresponding SDIO functional driver don't have the system suspend/resume callbacks assigned. This behaviour has been around for a very long time. However, a recent bug report tells us there are problems with this approach. More precisely, when receiving the PM_SUSPEND_PREPARE notification, we may end up hanging on I/O to be completed, thus also preventing the system from getting suspended. In the end what happens, is that the cancel_delayed_work_sync() in mmc_pm_notify() ends up waiting for mmc_rescan() to complete - and since mmc_rescan() wants to claim the host, it needs to wait for the I/O to be completed first. Typically, this problem is triggered in Android, if there is ongoing I/O while the user decides to suspend, resume and then suspend the system again. This due to that after the resume, an mmc_rescan() work gets punted to the workqueue, which job is to verify that the card remains inserted after the system has resumed. To fix this problem, userspace needs to become frozen to suspend the I/O, prior to turning off the card detection mechanism. Therefore, let's drop the PM notifiers for mmc subsystem altogether and rely on the card detection to be turned off/on as a part of the system_freezable_wq, that we are already using. Moreover, to allow and SDIO card to be removed during system suspend, let's manage this from a ->prepare() callback, assigned at the mmc_host_class level. In this way, we can use the parent device (the mmc_host_class device), to remove the card device that is the child, in the device_prepare() phase. Reported-by: Kiwoong Kim Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20210310152900.149380-1-ulf.hansson@linaro.org Reviewed-by: Kiwoong Kim Signed-off-by: Greg Kroah-Hartman

mmc: core: Do a power cycle when the CMD11 fails

2021-05-11T12:04:03Z

commit 147186f531ae49c18b7a9091a2c40e83b3d95649 upstream. A CMD11 is sent to the SD/SDIO card to start the voltage switch procedure into 1.8V I/O. According to the SD spec a power cycle is needed of the card, if it turns out that the CMD11 fails. Let's fix this, to allow a retry of the initialization without the voltage switch, to succeed. Note that, whether it makes sense to also retry with the voltage switch after the power cycle is a bit more difficult to know. At this point, we treat it like the CMD11 isn't supported and therefore we skip it when retrying. Signed-off-by: DooHyun Hwang Link: https://lore.kernel.org/r/20210210045936.7809-1-dh0421.hwang@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman