kernel.git/drivers/mmc/core/core.c, branch linux-2.6.32.y

mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume

2011-05-09T22:55:31Z

commit 4c2ef25fe0b847d2ae818f74758ddb0be1c27d8e upstream. If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to suspend, the card will be removed, therefore this patch doesn't change the behavior of this option. However the removal will be done by pm notifier, which runs while userspace is still not frozen and thus can freely use del_gendisk, without the risk of deadlock which would happen otherwise. Card detect workqueue is now disabled while userspace is frozen, Therefore if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during suspend, the removal will be detected as soon as userspace is unfrozen, again at the moment it is safe to call del_gendisk. Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate. [akpm@linux-foundation.org: clean up function prototype] [akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Maxim Levitsky Cc: David Brownell Cc: Alan Stern Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds [bwh: Adjust for 2.6.32] Signed-off-by: Greg Kroah-Hartman

mmc: propagate error codes back from bus drivers' suspend/resume methods

2009-09-23T14:39:38Z

Especially for SDIO drivers which may have special conditions/errors to report, it is a good thing to relay the returned error code back to upper layers. This also allows for the rationalization of the resume path where code to "remove" a no-longer-existing or replaced card was duplicated into the MMC, SD and SDIO bus drivers. In the SDIO case, if a function suspend method returns an error, then all previously suspended functions are resumed and the error returned. An exception is made for -ENOSYS which the core interprets as "we don't support suspend so just kick the card out for suspend and return success". When resuming SDIO cards, the core code only validates the manufacturer and product IDs to make sure the same kind of card is still present before invoking functions resume methods. It's the function driver's responsibility to perform further tests to confirm that the actual same card is present (same MAC address, etc.) and return an error otherwise. Signed-off-by: Nicolas Pitre Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: power off once at removal

2009-09-23T14:39:34Z

Fix MMC host stop sequence: power off once. Signed-off-by: Denis Karpov Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: add mmc card sleep and awake support

2009-09-23T14:39:33Z

Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: add ability to save power by powering off cards

2009-09-23T14:39:33Z

Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: allow host claim / release nesting

2009-09-23T14:39:33Z

This change allows the MMC host to be claimed in situations where the host may or may not have already been claimed. Also 'mmc_try_claim_host()' is now exported. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: add 'enable' and 'disable' methods to mmc host

2009-09-23T14:39:33Z

MMC hosts that support power saving can use the 'enable' and 'disable' methods to exit and enter power saving states. An explanation of their use is provided in the comments added to include/linux/mmc/host.h. Signed-off-by: Adrian Hunter Acked-by: Matt Fleming Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Jarkko Lavinen Cc: Denis Karpov Cc: Pierre Ossman Cc: Philip Langdale Cc: "Madhusudhan" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mmc: in mmc_power_up(), use previously selected ocr if available

2009-09-23T14:39:32Z

When mmc_power_up is called during unsafe resume, host->ocr should be used instead of host->ocr_avail. Signed-off-by: Balaji Rao Cc: Andy Green Cc: Pierre Ossman Cc: Ian Molton Cc: "Roberto A. Foglietta" Cc: Philip Langdale Acked-by: Matt Fleming Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

MMC core: limit minimum initialization frequency to 400kHz

2009-06-13T20:42:57Z

Some controllers allow a much lower frequency than 400kHz. Keep the minimum frequency within sensible limits. Signed-off-by: Sascha Hauer

mmc: mmc_rescan detects card change in one run

2009-06-13T20:42:56Z

With this patch, mmc_rescan can detect the removal of an mmc card and the insertion of (possibly another) card in the same run. This means that a card change can be detected without having to call mmc_detect_change multiple times. This change generalises the core such that it can be easily used by hosts which provide a mechanism to detect only the presence of a card reader cover, which has to be taken off in order to insert a card. Other hosts ("card detect" or "MMC_CAP_NEEDS_POLL") each receive an event when a card is removed and when a card is inserted, so it is sufficient for them if mmc_rescan handles only one event at a time. "Cover detect" hosts, however, only receive events about the cover status. This means that between 2 subsequent events, both a card removal and a card insertion can occur. In this case, the pre-patch version of mmc_rescan would only detect the removal of the previous card but not the insertion of the new card. Signed-off-by: Jorg Schummer Signed-off-by: Pierre Ossman