kernel.git/drivers/mmc/core/block.c, branch linux-6.4.y

mmc: block: Fix in_flight[issue_type] value error

2023-08-23T15:32:54Z

commit 4b430d4ac99750ee2ae2f893f1055c7af1ec3dc5 upstream. For a completed request, after the mmc_blk_mq_complete_rq(mq, req) function is executed, the bitmap_tags corresponding to the request will be cleared, that is, the request will be regarded as idle. If the request is acquired by a different type of process at this time, the issue_type of the request may change. It further caused the value of mq->in_flight[issue_type] to be abnormal, and a large number of requests could not be sent. p1: p2: mmc_blk_mq_complete_rq blk_mq_free_request blk_mq_get_request blk_mq_rq_ctx_init mmc_blk_mq_dec_in_flight mmc_issue_type(mq, req) This strategy can ensure the consistency of issue_type before and after executing mmc_blk_mq_complete_rq. Fixes: 81196976ed94 ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Yibin Ding Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20230802023023.1318134-1-yunlong.xing@unisoc.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: ioctl: do write error check for spi

2023-07-19T14:36:22Z

commit 568898cbc8b570311b3b94a3202b8233f4168144 upstream. SPI doesn't have the usual PROG path we can check for error bits after moving back to TRAN. Instead it holds the line LOW until completion. We can then check if the card shows any errors or is in IDLE state, indicating the line is no longer LOW because the card was reset. Signed-off-by: Christian Loehle Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/55920f880c9742f486f64aa44e25508e@hyperstone.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: ensure error propagation for non-blk

2023-05-09T09:16:15Z

Requests to the mmc layer usually come through a block device IO. The exceptions are the ioctl interface, RPMB chardev ioctl and debugfs, which issue their own blk_mq requests through blk_execute_rq and do not query the BLK_STS error but the mmcblk-internal drv_op_result. This patch ensures that drv_op_result defaults to an error and has to be overwritten by the operation to be considered successful. The behavior leads to a bug where the request never propagates the error, e.g. by directly erroring out at mmc_blk_mq_issue_rq if mmc_blk_part_switch fails. The ioctl caller of the rpmb chardev then can never see an error (BLK_STS_IOERR, but drv_op_result is unchanged) and thus may assume that their call executed successfully when it did not. While always checking the blk_execute_rq return value would be advised, let's eliminate the error by always setting drv_op_result as -EIO to be overwritten on success (or other error) Fixes: 614f0388f580 ("mmc: block: move single ioctl() commands to block requests") Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/59c17ada35664b818b7bd83752119b2d@hyperstone.com Signed-off-by: Ulf Hansson

mmc: core: Remove unused macro mmc_req_rel_wr

2023-04-17T07:47:25Z

There is no user for macro mmc_req_rel_wr, so delete it. Signed-off-by: Bean Huo Link: https://lore.kernel.org/r/20230403221754.16168-1-beanhuo@iokpp.de Signed-off-by: Ulf Hansson

mmc: core: Align to common busy polling behaviour for mmc ioctls

2023-02-15T12:24:03Z

Let's align to the common busy polling behaviour for mmc ioctls, by updating the below two corresponding parts, that comes into play when using an R1B response for a command. *) A command with an R1B response should be prepared by calling mmc_prepare_busy_cmd(), which make us respects the host's busy timeout constraints. **) When an R1B response is being used and the host also supports HW busy detection, we should skip to poll for busy completion. Suggested-by: Christian Loehle Signed-off-by: Ulf Hansson Reviewed-by: Christian Loehle Link: https://lore.kernel.org/r/20230213133707.27857-1-ulf.hansson@linaro.org

mmc: core: Remove non-data R1B ioctl workaround

2022-12-07T12:29:13Z

The workaround of pretending R1B non-data transfers are data transfers in order for the busy timeout to be respected by the host controller driver is removed. It wasn't useful in a long time. Initially the workaround ensured that R1B commands did not time out by setting the data timeout to be the command timeout in commit cb87ea28ed9e ("mmc: core: Add mmc CMD+ACMD passthrough ioctl"). This was moved inside an if-clause with idata->buf_bytes being set in commit 4d6144de8ba2 ("mmc: core: check for zero length ioctl data"). Since the workaround is now inside the idata->buf_bytes clause and intended to fix R1B non-data transfers, that do not have buf_bytes set, we can remove the workaround altogether. This was dead code, since data transfers doesn't use R1B commands. Signed-off-by: Christian Loehle Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/57d4aceb25254e448bd3e575bd99b0c2@hyperstone.com Signed-off-by: Ulf Hansson

mmc: block: Remove error check of hw_reset on reset

2022-10-17T09:51:33Z

Before switching back to the right partition in mmc_blk_reset there used to be a check if hw_reset was even supported. This return value was removed, so there is no reason to check. Furthermore ensure part_curr is not falsely set to a valid value on reset or partition switch error. As part of this change the code paths of mmc_blk_reset calls were checked to ensure no commands are issued after a failed mmc_blk_reset directly without going through the block layer. Fixes: fefdd3c91e0a ("mmc: core: Drop superfluous validations in mmc_hw|sw_reset()") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Reviewed-by: Adrian Hunter Link: https://lore.kernel.org/r/e91be6199d04414a91e20611c81bfe1d@hyperstone.com Signed-off-by: Ulf Hansson

mmc: core: Add SD card quirk for broken discard

2022-10-06T11:31:13Z

Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode. To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead. Signed-off-by: Avri Altman Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson

Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2022-08-05T02:41:09Z

Pull MMC updates from Ulf Hansson: "MMC core: - Add support for the asynchronous SDIO wakeup interrupts - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap - Add support to store error stats from host drivers - Extend debugfs to show error stats from host drivers - Add single I/O read support in the recovery path for 4k sector cards MMC host: - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant - mmc_spi: Convert corresponding DT bindings to the dtschema - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode - mtk-sd: Add support for SDIO wake irqs - mtk-sd: Add support for the Mediatek MT8188 variant - renesas_sdhi: Drop redundant manual tap correction for newer SoCs - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants - sdhci/cqhci: Add support to capture stats from host errors - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0 - sdhci-msm: Add support for the MSM8998 and SM8450 variant - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants - sdhci-pci-gli: Improve I/O read/write performance for GL9763E - sdhci-s3c: Convert corresponding DT bindings to the dtschema - tmio: Avoid glitches when resetting MEMSTICK core: - A couple of minor fixes and cleanups" * tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits) mmc: mediatek: add support for SDIO eint wakup IRQ mmc: core: Add support for SDIO wakeup interrupt dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126 mmc: renesas_sdhi: newer SoCs don't need manual tap correction mmc: cavium-thunderx: Add of_node_put() when breaking out of loop mmc: cavium-octeon: Add of_node_put() when breaking out of loop mmc: core: quirks: Add of_node_put() when breaking out of loop mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible mmc: sdhci-msm: drop redundant of_device_id entries dt-bindings: mmc: sdhci-msm: add MSM8998 mmc: block: Add single read for 4k sector cards mmc: mxcmmc: Use mmc_card_sdio macro mmc: core: Use mmc_card_* macro and add a new for the sd_combo type dt-bindings: mmc: sdhci-msm: constrain reg-names per variants dt-bindings: mmc: sdhci-msm: fix reg-names entries dt-bindings: mmc: Add compatible for MediaTek MT8188 dt-bindings: mmc: sdhci-msm: document resets mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R ...

mmc: fix disk/queue leak in case of adding disk failure

2022-07-18T19:12:11Z

In case of adding disk failure, the disk needs to be released, otherwise disk/queue is leaked. Signed-off-by: Ming Lei Link: https://lore.kernel.org/r/20220718160851.312972-1-ming.lei@redhat.com Signed-off-by: Jens Axboe