kernel.git/drivers/mmc/core/block.c, branch linux-6.17.y

mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()

2025-10-15T10:03:31Z

[ Upstream commit 072755cca7e743c28a273fcb69b0e826109473d7 ] Rename the inner 'frm' variable to 'resp_frm' in the write path of mmc_route_rpmb_frames() to avoid shadowing the outer 'frm' variable. The function declares 'frm' at function scope pointing to the request frame, but then redeclares another 'frm' variable inside the write block pointing to the response frame. This shadowing makes the code confusing and error-prone. Using 'resp_frm' for the response frame makes the distinction clear and improves code readability. Fixes: 7852028a35f0 ("mmc: block: register RPMB partition with the RPMB subsystem") Reviewed-by: Avri Altman Reviewed-by: Jens Wiklander Signed-off-by: Bean Huo Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Scan the eMMC boot areas for partition table

2025-05-19T11:22:10Z

It appears that some vendors provision the boot areas with valid part tables (GPT) in order to have identifiable partitions for device and firmware specific data, such has the qualcomm CDT (Qualcomm Config Data Table). Additionally, these boot areas can be utilized to host device-specific IDs, calibration data, and other critical information. Signed-off-by: Loic Poulain Link: https://lore.kernel.org/r/20250507134538.575912-1-loic.poulain@oss.qualcomm.com Signed-off-by: Ulf Hansson

mmc: rename mmc_host_done_complete() to mmc_host_can_done_complete()

2025-05-14T15:07:48Z

It is not obvious that this functions checks capabilities. Rename it to include '_can' like other capability helpers. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20250501063325.7262-8-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: rename mmc_host_cmd23() to mmc_host_can_cmd23()

2025-05-14T15:07:48Z

It is not obvious that this functions checks capabilities. Rename it to include '_can' like other capability helpers. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20250501063325.7262-7-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: rename mmc_can_trim() to mmc_card_can_trim()

2025-05-14T14:59:17Z

mmc_can_* functions sometimes relate to the card and sometimes to the host. Make it obvious by renaming this function to include 'card'. Also, convert to proper bool type while we are here. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20250401095847.29271-10-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: rename mmc_can_secure_erase_trim() to mmc_card_can_secure_erase_trim()

2025-05-14T14:59:17Z

mmc_can_* functions sometimes relate to the card and sometimes to the host. Make it obvious by renaming this function to include 'card'. Also, convert to proper bool type while we are here. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20250401095847.29271-8-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: rename mmc_can_erase() to mmc_card_can_erase()

2025-05-14T14:59:17Z

mmc_can_* functions sometimes relate to the card and sometimes to the host. Make it obvious by renaming this function to include 'card'. Also, convert to proper bool type while we are here. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20250401095847.29271-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2024-11-20T20:51:32Z

Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates" * tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits) mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting mmc: mtk-sd: Fix error handle of probe function mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask mmc: sdhci-esdhc-imx: Implement emmc hardware reset mmc: core: Correct type in variable assignment for UHS-II mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument mmc: sdhci-uhs2: Remove unnecessary variables mmc: sdhci-uhs2: Correct incorrect type in argument mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible mmc: sdhci-uhs2: Remove unnecessary NULL check mmc: core: Fix error paths for UHS-II card init and re-init mmc: core: Add error handling of sd_uhs2_power_up() mmc: core: Simplify sd_uhs2_power_up() mmc: bcm2835: Introduce proper clock handling mmc: bcm2835: Fix type of current clock speed dt-bindings: mmc: Add sdhci compatible for QCS615 mmc: core: Use GFP_NOIO in ACMD22 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible ...

mmc: core: Use GFP_NOIO in ACMD22

2024-10-25T14:37:26Z

While reviewing the SDUC series, Adrian made a comment concerning the memory allocation code in mmc_sd_num_wr_blocks() - see [1]. Prevent memory allocations from triggering I/O operations while ACMD22 is in progress. [1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@intel.com/ Suggested-by: Adrian Hunter Reviewed-by: Adrian Hunter Fixes: 051913dada04 ("mmc_block: do not DMA to stack") Signed-off-by: Avri Altman Cc: stable@vger.kernel.org Message-ID: <20241021153227.493970-1-avri.altman@wdc.com> Signed-off-by: Ulf Hansson

mmc: block: attach partitions fwnode if found in mmc-card

2024-10-22T14:14:56Z

Attach partitions fwnode if found in mmc-card and register disk with it. This permits block partition to reference the node and register a partition table defined in DT for the special case for embedded device that doesn't have a partition table flashed but have an hardcoded partition table passed from the system. JEDEC BOOT partition boot0/boot1 are supported but in DT we refer with the JEDEC name of boot1 and boot2 to better adhere to documentation. Also JEDEC GP partition gp0/1/2/3 are supported but in DT we refer with the JEDEC name of gp1/2/3/4 to better adhere to documentration. Signed-off-by: Christian Marangi Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20241002221306.4403-5-ansuelsmth@gmail.com Signed-off-by: Jens Axboe