kernel.git/drivers/mmc/core/block.c, branch linux-5.17.y

mmc: block: Fix CQE recovery reset success

2022-06-14T16:41:46Z

commit a051246b786af7e4a9d9219cc7038a6e8a411531 upstream. The intention of the use of mmc_blk_reset_success() in mmc_blk_cqe_recovery() was to prevent repeated resets when retrying and getting the same error. However, that may not be the case - any amount of time and I/O may pass before another recovery is needed, in which case there would be no reason to deny it the opportunity to recover via a reset if necessary. CQE recovery is expected seldom and failure to recover (if the clear tasks command fails), even more seldom, so it is better to allow the reset always, which can be done by calling mmc_blk_reset_success() always. Fixes: 1e8e55b67030c6 ("mmc: block: Add CQE support") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Link: https://lore.kernel.org/r/20220531171922.76080-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Allows to override the timeout value for ioctl() path

2022-06-09T08:26:25Z

commit 23e09be254f95a5b75cd87f91a4014f3b46dda3f upstream. Occasionally, user-land applications initiate longer timeout values for certain commands through ioctl() system call. But so far we are still using a fixed timeout of 10 seconds in mmc_poll_for_busy() on the ioctl() path, even if a custom timeout is specified in the userspace application. This patch allows custom timeout values to override this default timeout values on the ioctl path. Cc: stable Signed-off-by: Bean Huo Acked-by: Avri Altman Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20220423221623.1074556-3-huobean@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Fixup support for writeback-cache for eMMC and SD

2022-04-13T17:27:35Z

commit 08ebf903af57cda6d773f3dd1671b64f73b432b8 upstream. During the card initialization process, the mmc core checks whether the eMMC/SD card supports an internal writeback-cache and then enables it inside the card. Unfortunately, this isn't according to what the mmc core reports to the upper block layer. Instead, the writeback-cache support with REQ_FLUSH and REQ_FUA, are being enabled depending on whether the host supports the CMD23 (MMC_CAP_CMD23) and whether an eMMC supports the reliable-write command. This is wrong and it may also sound awkward. In fact, it's a remnant from when both eMMC/SD cards didn't have dedicated commands/support to control the internal writeback-cache. In other words, it was the best we could do at that point in time. To fix the problem, but also without breaking backwards compatibility, let's align the REQ_FLUSH support with whether the writeback-cache became successfully enabled - for both eMMC and SD cards. Cc: stable@kernel.org Fixes: 881d1c25f765 ("mmc: core: Add cache control for eMMC4.5 device") Fixes: 130206a615a9 ("mmc: core: Add support for cache ctrl for SD cards") Depends-on: 97fce126e279 ("mmc: block: Issue a cache flush only when it's enabled") Reviewed-by: Avri Altman Signed-off-by: Michael Wu Link: https://lore.kernel.org/r/20220331073223.106415-1-michael@allwinnertech.com [Ulf: Re-wrote the commit message] Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: Check for errors after write on SPI

2022-04-13T17:27:35Z

commit 5d435933376962b107bd76970912e7e80247dcc7 upstream. Introduce a SEND_STATUS check for writes through SPI to not mark an unsuccessful write as successful. Since SPI SD/MMC does not have states, after a write, the card will just hold the line LOW until it is ready again. The driver marks the write therefore as completed as soon as it reads something other than all zeroes. The driver does not distinguish from a card no longer signalling busy and it being disconnected (and the line being pulled-up by the host). This lead to writes being marked as successful when disconnecting a busy card. Now the card is ensured to be still connected by an additional CMD13, just like non-SPI is ensured to go back to TRAN state. While at it and since we already poll for the post-write status anyway, we might as well check for SPIs error bits (any of them). The disconnecting card problem is reproducable for me after continuous write activity and randomly disconnecting, around every 20-50 tries on SPI DS for some card. Fixes: 7213d175e3b6f ("MMC/SD card driver learns SPI") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/76f6f5d2b35543bab3dfe438f268609c@hyperstone.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND

2022-03-07T10:47:39Z

Commit 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1"), significantly decreased the polling period from ~10-12ms into just a couple of us. The purpose was to decrease the total time spent in the busy polling loop, but unfortunate it has lead to problems, that causes eMMC cards to never gets out busy and thus fails to be initialized. To fix the problem, but also to try to keep some of the new improved behaviour, let's start by using a polling period of 1-2ms, which then increases for each loop, according to common polling loop in __mmc_poll_for_busy(). Reported-by: Jean Rene Dawin Reported-by: H. Nikolaus Schaller Cc: Huijin Park Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1") Signed-off-by: Ulf Hansson Tested-by: Jean Rene Dawin Tested-by: H. Nikolaus Schaller Link: https://lore.kernel.org/r/20220304105656.149281-1-ulf.hansson@linaro.org

mmc: block: fix read single on recovery logic

2022-02-08T15:04:49Z

On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer. On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted. Fixes: 81196976ed946c ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle Reviewed-by: Adrian Hunter Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com Signed-off-by: Ulf Hansson

Merge tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block

2022-01-12T18:26:52Z

Pull block updates from Jens Axboe: - Unify where the struct request handling code is located in the blk-mq code (Christoph) - Header cleanups (Christoph) - Clean up the io_context handling code (Christoph, me) - Get rid of ->rq_disk in struct request (Christoph) - Error handling fix for add_disk() (Christoph) - request allocation cleanusp (Christoph) - Documentation updates (Eric, Matthew) - Remove trivial crypto unregister helper (Eric) - Reduce shared tag overhead (John) - Reduce poll_stats memory overhead (me) - Known indirect function call for dio (me) - Use atomic references for struct request (me) - Support request list issue for block and NVMe (me) - Improve queue dispatch pinning (Ming) - Improve the direct list issue code (Keith) - BFQ improvements (Jan) - Direct completion helper and use it in mmc block (Sebastian) - Use raw spinlock for the blktrace code (Wander) - fsync error handling fix (Ye) - Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me) * tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits) MAINTAINERS: add entries for block layer documentation docs: block: remove queue-sysfs.rst docs: sysfs-block: document virt_boundary_mask docs: sysfs-block: document stable_writes docs: sysfs-block: fill in missing documentation from queue-sysfs.rst docs: sysfs-block: add contact for nomerges docs: sysfs-block: sort alphabetically docs: sysfs-block: move to stable directory block: don't protect submit_bio_checks by q_usage_counter block: fix old-style declaration nvme-pci: fix queue_rqs list splitting block: introduce rq_list_move block: introduce rq_list_for_each_safe macro block: move rq_list macros to blk-mq.h block: drop needless assignment in set_task_ioprio() block: remove unnecessary trailing '\' bio.h: fix kernel-doc warnings block: check minor range in device_add_disk() block: use "unsigned long" for blk_validate_block_size(). block: fix error unwinding in device_add_disk ...

mmc: core: change __mmc_poll_for_busy() parameter type

2021-12-14T20:35:24Z

This patch changes the __mmc_poll_for_busy() first parameter type from 'struct mmc_card*' to 'struct mmc_host*'. Because the function refers only 'struct mmc_host' to get hostname. Signed-off-by: Huijin Park Link: https://lore.kernel.org/r/20211104063231.2115-2-huijin.park@samsung.com Signed-off-by: Ulf Hansson

block: remove the gendisk argument to blk_execute_rq

2021-11-29T13:41:29Z

Remove the gendisk aregument to blk_execute_rq and blk_execute_rq_nowait given that it is unused now. Also convert the boolean at_head parameter to actually use the bool type while touching the prototype. Signed-off-by: Christoph Hellwig Reviewed-by: Chaitanya Kulkarni Reviewed-by: Martin K. Petersen Link: https://lore.kernel.org/r/20211126121802.2090656-5-hch@lst.de Signed-off-by: Jens Axboe

block: remove the ->rq_disk field in struct request

2021-11-29T13:41:29Z

Just use the disk attached to the request_queue instead. Signed-off-by: Christoph Hellwig Reviewed-by: Chaitanya Kulkarni Reviewed-by: Martin K. Petersen Link: https://lore.kernel.org/r/20211126121802.2090656-4-hch@lst.de Signed-off-by: Jens Axboe