kernel.git/drivers/mmc/core/block.c, branch linux-5.12.y

mmc: block: Disable CMDQ on the ioctl path

2021-07-14T15:00:31Z

commit 70b52f09080565030a530a784f1c9948a7f48ca3 upstream. According to the eMMC Spec: "When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN field is set to ‘1’) class 11 commands are the only method through which data transfer tasks can be issued. Existing data transfer commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when command queuing is enabled." which means if CMDQ is enabled, the FFU commands will not be supported. To fix this issue, just simply disable CMDQ on the ioctl path, and re-enable CMDQ once ioctl request is completed. Tested-by: Michael Brunner Signed-off-by: Bean Huo Acked-by: Adrian Hunter Fixes: 1e8e55b67030 (mmc: block: Add CQE support) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210504203209.361597-1-huobean@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: Issue a cache flush only when it's enabled

2021-05-12T06:39:31Z

commit 97fce126e279690105ee15be652b465fd96f9997 upstream. In command queueing mode, the cache isn't flushed via the mmc_flush_cache() function, but instead by issuing a CMDQ_TASK_MGMT (CMD48) with a FLUSH_CACHE opcode. In this path, we need to check if cache has been enabled, before deciding to flush the cache, along the lines of what's being done in mmc_flush_cache(). To fix this problem, let's add a new bus ops callback ->cache_enabled() and implement it for the mmc bus type. In this way, the mmc block device driver can call it to know whether cache flushing should be done. Fixes: 1e8e55b67030 (mmc: block: Add CQE support) Cc: stable@vger.kernel.org Reported-by: Brendan Peter Signed-off-by: Avri Altman Tested-by: Brendan Peter Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20210425060207.2591-2-avri.altman@wdc.com Link: https://lore.kernel.org/r/20210425060207.2591-3-avri.altman@wdc.com [Ulf: Squashed the two patches and made some minor updates] Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: block: Update ext_csd.cache_ctrl if it was written

2021-05-12T06:39:31Z

commit aea0440ad023ab0662299326f941214b0d7480bd upstream. The cache function can be turned ON and OFF by writing to the CACHE_CTRL byte (EXT_CSD byte [33]). However, card->ext_csd.cache_ctrl is only set on init if cache size > 0. Fix that by explicitly setting ext_csd.cache_ctrl on ext-csd write. Signed-off-by: Avri Altman Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210420134641.57343-3-avri.altman@wdc.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Merge tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2021-02-22T17:05:28Z

Pull MMC updates from Ulf Hansson: "MMC core: - Add support for eMMC inline encryption - Add a helper function to parse DT properties for clock phases - Some improvements and cleanups for the mmc_test module MMC host: - android-goldfish: Remove driver - cqhci: Add support for eMMC inline encryption - dw_mmc-zx: Remove driver - meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED - mmci: Add support for probing bus voltage level translator - mtk-sd: Address race condition for request timeouts - sdhci_am654: Add Support for the variant on TI's AM64 SoC - sdhci-esdhc-imx: Prevent kernel panic at ->remove() - sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4 - sdhci-msm: Add Inline Crypto Engine support - sdhci-msm: Use actual_clock to improve timeout calculations - sdhci-of-aspeed: Add Andrew Jeffery as maintainer - sdhci-of-aspeed: Extend clock support for the AST2600 variant - sdhci-pci-gli: Increase idle period for low power state for GL9763E - sdhci-pci-o2micro: Make tuning for SDR104 HW more robust - sdhci-sirf: Remove driver - sdhci-xenon: Add support for the AP807 variant - sunxi-mmc: Add support for the A100 variant - sunxi-mmc: Ensure host is suspended during system sleep - tmio: Add detection of data timeout errors - tmio/renesas_sdhi: Extend support for retuning - renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops" * tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: sdhci-esdhc-imx: fix kernel panic when remove module mmc: host: Retire MMC_GOLDFISH mmc: cb710: Use new tasklet API mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure mmc: mmc_test: use erase_arg for mmc_erase command mmc: wbsd: Use new tasklet API mmc: via-sdmmc: Use new tasklet API mmc: uniphier-sd: Use new tasklet API mmc: tifm_sd: Use new tasklet API mmc: s3cmci: Use new tasklet API mmc: omap: Use new tasklet API mmc: dw_mmc: Use new tasklet API mmc: au1xmmc: Use new tasklet API mmc: atmel-mci: Use new tasklet API mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ mmc: queue: Remove unused define mmc: core: Drop redundant bouncesz from struct mmc_card mmc: core: Drop redundant member in struct mmc host mmc: core: Use host instead of card argument to mmc_spi_send_csd() mmc: core: Exclude unnecessary header file ...

mmc: core: Add basic support for inline encryption

2021-02-01T11:02:33Z

In preparation for adding CQHCI crypto engine (inline encryption) support, add the code required to make mmc_core and mmc_block aware of inline encryption. Specifically: - Add a capability flag MMC_CAP2_CRYPTO to struct mmc_host. Drivers will set this if the host and driver support inline encryption. - Embed a blk_keyslot_manager in struct mmc_host. Drivers will initialize this (as a device-managed resource) if the host and driver support inline encryption. mmc_block registers this keyslot manager with the request_queue of any MMC card attached to the host. - Make mmc_block copy the crypto keyslot and crypto data unit number from struct request to struct mmc_request, so that drivers will have access to them. - If the MMC host is reset, reprogram all the keyslots to ensure that the software state stays in sync with the hardware state. Co-developed-by: Satya Tangirala Signed-off-by: Satya Tangirala Acked-by: Adrian Hunter Reviewed-by: Satya Tangirala Reviewed-and-tested-by: Peng Zhou Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20210126001456.382989-2-ebiggers@kernel.org Signed-off-by: Ulf Hansson

block: remove unnecessary argument from blk_execute_rq

2021-01-25T04:52:39Z

We can remove 'q' from blk_execute_rq as well after the previous change in blk_execute_rq_nowait. And more importantly it never really was needed to start with given that we can trivial derive it from struct request. Cc: linux-scsi@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: linux-ide@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: linux-nfs@vger.kernel.org Acked-by: Ulf Hansson # for mmc Signed-off-by: Guoqing Jiang Signed-off-by: Jens Axboe

mmc: block: Fixup condition for CMD13 polling for RPMB requests

2020-12-04T14:02:27Z

The CMD13 polling is needed for commands with R1B responses. In commit a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response"), the intent was to introduce this for requests targeted to the RPMB partition. However, the condition to trigger the polling loop became wrong, leading to unnecessary polling. Let's fix the condition to avoid this. Fixes: a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response") Cc: stable@vger.kernel.org Reported-by: Zhan Liu Signed-off-by: Zhan Liu Signed-off-by: Bean Huo Link: https://lore.kernel.org/r/20201202202320.22165-1-huobean@gmail.com Signed-off-by: Ulf Hansson

block: add a bdev_is_partition helper

2020-09-25T14:18:57Z

Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig Acked-by: Ulf Hansson Signed-off-by: Jens Axboe

mmc: remove the call to check_disk_change

2020-07-08T22:20:01Z

The mmc driver doesn't support event notifications, which means that check_disk_change is a no-op. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

blk-mq: move failure injection out of blk_mq_complete_request

2020-06-24T15:15:57Z

Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe