kernel.git/drivers/mmc/card/queue.c, branch linux-3.1.y

mmc: block: add handling for two parallel block requests in issue_rw_rq

2011-07-20T21:21:15Z

Change mmc_blk_issue_rw_rq() to become asynchronous. The execution flow looks like this: * The mmc-queue calls issue_rw_rq(), which sends the request to the host and returns back to the mmc-queue. * The mmc-queue calls issue_rw_rq() again with a new request. * This new request is prepared in issue_rw_rq(), then it waits for the active request to complete before pushing it to the host. * When the mmc-queue is empty it will call issue_rw_rq() with a NULL req to finish off the active request without starting a new request. Signed-off-by: Per Forlin Acked-by: Kyungmin Park Acked-by: Arnd Bergmann Reviewed-by: Venkatraman S Tested-by: Sourav Poddar Tested-by: Linus Walleij Signed-off-by: Chris Ball

mmc: queue: add a second mmc queue request member

2011-07-20T21:21:15Z

Add an additional mmc queue request instance to make way for two active block requests. One request may be active while the other request is being prepared. Signed-off-by: Per Forlin Acked-by: Kyungmin Park Acked-by: Arnd Bergmann Reviewed-by: Venkatraman S Tested-by: Sourav Poddar Tested-by: Linus Walleij Signed-off-by: Chris Ball

mmc: block: add member in mmc queue struct to hold request data

2011-07-20T21:21:13Z

The way the request data is organized in the mmc queue struct, it only allows processing of one request at a time. This patch adds a new struct to hold mmc queue request data such as sg list, request, blk request and bounce buffers, and updates any functions depending on the mmc queue struct. This prepares for using multiple active requests in one mmc queue. Signed-off-by: Per Forlin Acked-by: Kyungmin Park Acked-by: Arnd Bergmann Reviewed-by: Venkatraman S Tested-by: Sourav Poddar Tested-by: Linus Walleij Signed-off-by: Chris Ball

mmc: queue: let host controllers specify maximum discard timeout

2011-07-20T21:21:03Z

Some host controllers will not operate without a hardware timeout that is limited in value. However large discards require large timeouts, so there needs to be a way to specify the maximum discard size. A host controller driver may now specify the maximum discard timeout possible so that max_discard_sectors can be calculated. However, for eMMC when the High Capacity Erase Group Size is not in use, the timeout calculation depends on clock rate which may change. For that case Preferred Erase Size is used instead. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball

mmc: queue: bring discard_granularity/alignment into line with SCSI

2011-06-25T22:53:05Z

SCSI defines discard alignment as the offset to the first optimal discard. In the case of SD/MMC, that is always zero which is the default. SCSI defines discard granularity as a hint of a optimal discard size. That is much better expressed by the MMC "preferred erase size" (pref_erase) field. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball

mmc: queue: append partition subname to queue thread name

2011-06-25T22:52:57Z

For example, an eMMC with 2 boot partitions will have 3 threads. The names change from: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0 42 ? 00:00:00 mmcqd/0 to: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0boot0 42 ? 00:00:00 mmcqd/0boot1 Signed-off-by: Adrian Hunter Cc: Andrei Warkentin Signed-off-by: Chris Ball

mmc: remove redundant irq disabling

2011-05-25T00:59:17Z

There is no need to disable irq's when using the sg_copy_*_buffer() functions because those functions do that already. There are also no races for the mm_queue struct here that would require the irq's to be disabled before calling sg_copy_*_buffer(). Signed-off-by: John Ogness Signed-off-by: Chris Ball

block: remove per-queue plugging

2011-03-10T07:52:07Z

Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe

mmc: name mmc queue thread by host index

2010-10-23T13:11:16Z

Usually there are multiple mmc host controllers; rename mmc queue thread by host index so we can easily identify which controller it belongs to. Signed-off-by: Ethan Du Signed-off-by: Chris Ball

mmc: Convert "mutex" to semaphore

2010-10-23T13:11:12Z

Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: Thomas Gleixner Cc: linux-mmc@vger.kernel.org Signed-off-by: Chris Ball