kernel.git/drivers/misc/mic/scif, branch linux-4.9.y

misc: mic: scif: Fix error handling path

2020-10-29T08:05:36Z

[ Upstream commit a81072a9c0ae734b7889929b0bc070fe3f353f0e ] Inside __scif_pin_pages(), when map_flags != SCIF_MAP_KERNEL it will call pin_user_pages_fast() to map nr_pages. However, pin_user_pages_fast() might fail with a return value -ERRNO. The return value is stored in pinned_pages->nr_pages. which in turn is passed to unpin_user_pages(), which expects pinned_pages->nr_pages >=0, else disaster. Fix this by assigning pinned_pages->nr_pages to 0 if pin_user_pages_fast() returns -ERRNO. Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Cc: John Hubbard Cc: Ira Weiny Cc: Dan Carpenter Reviewed-by: John Hubbard Signed-off-by: Souptick Joarder Link: https://lore.kernel.org/r/1600570295-29546-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: mic: fix a DMA pool free failure

2019-11-28T17:28:22Z

[ Upstream commit 6b995f4eec34745f6cb20d66d5277611f0b3c3fa ] In _scif_prog_signal(), the boolean variable 'x100' is used to indicate whether the MIC Coprocessor is X100. If 'x100' is true, the status descriptor will be used to write the value to the destination. Otherwise, a DMA pool will be allocated for this purpose. Specifically, if the DMA pool is allocated successfully, two memory addresses will be returned. One is for the CPU and the other is for the device to access the DMA pool. The former is stored to the variable 'status' and the latter is stored to the variable 'src'. After the allocation, the address in 'src' is saved to 'status->src_dma_addr', which is actually in the DMA pool, and 'src' is then modified. Later on, if an error occurs, the execution flow will transfer to the label 'dma_fail', which will check 'x100' and free up the allocated DMA pool if 'x100' is false. The point here is that 'status->src_dma_addr' is used for freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in the DMA pool. And thus, the device is able to modify this data. This can potentially cause failures when freeing up the DMA pool because of the modified device address. This patch avoids the above issue by using the variable 'src' (with necessary calculation) to free up the DMA pool. Signed-off-by: Wenwen Wang Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

misc: mic/scif: fix copy-paste error in scif_create_remote_lookup

2018-12-05T18:42:41Z

commit 6484a677294aa5d08c0210f2f387ebb9be646115 upstream. gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup': drivers/misc/mic/scif/scif_rma.c:373:25: warning: variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable] 'vmalloc_num_pages' should be used to determine if the address is within the vmalloc range. Fixes: ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration") Signed-off-by: YueHaibing Cc: stable Signed-off-by: Greg Kroah-Hartman

misc: mic: SCIF Fix scif_get_new_port() error handling

2018-09-19T20:47:12Z

[ Upstream commit a39284ae9d2ad09975c8ae33f1bd0f05fbfbf6ee ] There are only 2 callers of scif_get_new_port() and both appear to get the error handling wrong. Both treat zero returns as error, but it actually returns negative error codes and >= 0 on success. Fixes: e9089f43c9a7 ("misc: mic: SCIF open close bind and listen APIs") Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mm: replace get_user_pages() write/force parameters with gup_flags

2016-10-19T15:11:43Z

This removes the 'write' and 'force' from get_user_pages() and replaces them with 'gup_flags' to make the use of FOLL_FORCE explicit in callers as use of this flag can result in surprising behaviour (and hence bugs) within the mm subsystem. Signed-off-by: Lorenzo Stoakes Acked-by: Christian König Acked-by: Jesper Nilsson Acked-by: Michal Hocko Reviewed-by: Jan Kara Signed-off-by: Linus Torvalds

misc: mic: scif: use vma_pages().

2016-08-30T12:45:50Z

Replace explicit computation of vma page count by a call to vma_pages() Signed-off-by: Muhammad Falak R Wani Signed-off-by: Greg Kroah-Hartman

mic: remove unused function arg

2016-08-30T12:45:50Z

When building with W=1, the __scif_rma_destroy_tcw function causes a harmless warning about an argument variable that is modified but not used: drivers/misc/mic/scif/scif_dma.c: In function ‘__scif_rma_destroy_tcw’: drivers/misc/mic/scif/scif_dma.c:118:27: error: parameter ‘ep’ set but not used [-Werror=unused-but-set-parameter] In this case, we can just remove the argument, since all callers are in the same file. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

misc: mic: silence uninitialized variable warning

2016-04-30T20:53:19Z

My static checker complains that we still use "mark" even when the _scif_fence_mark() call fails so it can be uninitialized. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-03-21T02:08:56Z

Pull x86 protection key support from Ingo Molnar: "This tree adds support for a new memory protection hardware feature that is available in upcoming Intel CPUs: 'protection keys' (pkeys). There's a background article at LWN.net: https://lwn.net/Articles/643797/ The gist is that protection keys allow the encoding of user-controllable permission masks in the pte. So instead of having a fixed protection mask in the pte (which needs a system call to change and works on a per page basis), the user can map a (handful of) protection mask variants and can change the masks runtime relatively cheaply, without having to change every single page in the affected virtual memory range. This allows the dynamic switching of the protection bits of large amounts of virtual memory, via user-space instructions. It also allows more precise control of MMU permission bits: for example the executable bit is separate from the read bit (see more about that below). This tree adds the MM infrastructure and low level x86 glue needed for that, plus it adds a high level API to make use of protection keys - if a user-space application calls: mmap(..., PROT_EXEC); or mprotect(ptr, sz, PROT_EXEC); (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice this special case, and will set a special protection key on this memory range. It also sets the appropriate bits in the Protection Keys User Rights (PKRU) register so that the memory becomes unreadable and unwritable. So using protection keys the kernel is able to implement 'true' PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies PROT_READ as well. Unreadable executable mappings have security advantages: they cannot be read via information leaks to figure out ASLR details, nor can they be scanned for ROP gadgets - and they cannot be used by exploits for data purposes either. We know about no user-space code that relies on pure PROT_EXEC mappings today, but binary loaders could start making use of this new feature to map binaries and libraries in a more secure fashion. There is other pending pkeys work that offers more high level system call APIs to manage protection keys - but those are not part of this pull request. Right now there's a Kconfig that controls this feature (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled (like most x86 CPU feature enablement code that has no runtime overhead), but it's not user-configurable at the moment. If there's any serious problem with this then we can make it configurable and/or flip the default" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) x86/mm/pkeys: Fix mismerge of protection keys CPUID bits mm/pkeys: Fix siginfo ABI breakage caused by new u64 field x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA mm/core, x86/mm/pkeys: Add execute-only protection keys support x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags x86/mm/pkeys: Allow kernel to modify user pkey rights register x86/fpu: Allow setting of XSAVE state x86/mm: Factor out LDT init from context init mm/core, x86/mm/pkeys: Add arch_validate_pkey() mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits() x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU x86/mm/pkeys: Add Kconfig prompt to existing config option x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps x86/mm/pkeys: Dump PKRU with other kernel registers mm/core, x86/mm/pkeys: Differentiate instruction fetches x86/mm/pkeys: Optimize fault handling in access_error() mm/core: Do not enforce PKEY permissions on remote mm access um, pkeys: Add UML arch_*_access_permitted() methods mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys x86/mm/gup: Simplify get_user_pages() PTE bit handling ...

mm/gup: Switch all callers of get_user_pages() to not pass tsk/mm

2016-02-16T09:11:12Z

We will soon modify the vanilla get_user_pages() so it can no longer be used on mm/tasks other than 'current/current->mm', which is by far the most common way it is called. For now, we allow the old-style calls, but warn when they are used. (implemented in previous patch) This patch switches all callers of: get_user_pages() get_user_pages_unlocked() get_user_pages_locked() to stop passing tsk/mm so they will no longer see the warnings. Signed-off-by: Dave Hansen Reviewed-by: Thomas Gleixner Cc: Andrea Arcangeli Cc: Andrew Morton Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Kirill A. Shutemov Cc: Linus Torvalds Cc: Naoya Horiguchi Cc: Peter Zijlstra Cc: Rik van Riel Cc: Srikar Dronamraju Cc: Vlastimil Babka Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.com Signed-off-by: Ingo Molnar