kernel.git/drivers/mfd/twl-core.c, branch linux-4.9.y

mfd: twl-core: Fix section annotations on {,un}protect_pm_master

2019-02-27T09:06:58Z

[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ] When building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from the function twl_probe() to the function .init.text:unprotect_pm_master() The function twl_probe() references the function __init unprotect_pm_master(). This is often because twl_probe lacks a __init annotation or the annotation of unprotect_pm_master is wrong. Remove the __init annotation on the *protect_pm_master functions so there is no more mismatch. Signed-off-by: Nathan Chancellor Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: twl-core: Make it explicitly non-modular

2016-10-04T14:48:04Z

The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config TWL4030_CORE drivers/mfd/Kconfig: bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" ...meaning that it currently is not being built as a module by anyone. Lets remove what modular code that we can, so that when reading the driver there is less doubt that it is builtin-only. Note that we can't remove the twl_remove() itself ; it is still used by the probe unwind routine. So we leave it linked into the .remove as well, even though it will most likely never be called via that path from an unbind. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker Acked-by: Tony Lindgren Signed-off-by: Lee Jones

mfd: twl-core: Refactoring for add_numbered_child()

2016-06-29T09:16:16Z

Adjust jump targets according to the Linux coding style convention. Another check for the variable "status" can be omitted then at the end. Signed-off-by: Markus Elfring Signed-off-by: Lee Jones

mfd: twl-core: Return directly after a failed platform_device_alloc() in add_numbered_child()

2016-06-29T09:16:11Z

The platform_device_put() function was called in one case by the add_numbered_child() function during error handling even if the passed variable "pdev" contained a null pointer. Return directly in this case. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Lee Jones

twl4030_charger: use runtime_pm to keep usb phy active while charging.

2015-08-05T03:10:06Z

The twl4030 usb phy needs to be active while we are using the USB VBUS as a current source for charging. In particular, the usb3v1 regulator must be enabled and the PHY_PWR_PHYPWD bit must be set to keep the phy powered. commit ab37813f4093a5f59cb8e083cde277289dc72ed3 twl4030_charger: Allow charger to control the regulator that feeds it gave the charger control over the regulator, but didn't resolve the PHY_PWR_PHYPWD issue. Now that both of these are controlled by runtime_pm in phy-twl4030-usb, we can simply take a runtime_pm reference to the USB phy whenever the charger wants to use it as a current source. So this patch reverts the above commit, and adds the necessary runtime_pm calls. Acked-by: Lee Jones Signed-off-by: NeilBrown Signed-off-by: Sebastian Reichel

mfd: twl-core: Constify struct regmap_config and reg_default array

2015-01-22T16:03:48Z

The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Make array of struct reg_default const as well. Signed-off-by: Krzysztof Kozlowski Acked-by: Tony Lindgren Signed-off-by: Lee Jones

Merge tag 'ib-mfd-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into omap-for-v3.16/pm

2014-05-06T20:48:02Z

Immutable branch between MFD and ARM OMAP due for v3.16 merge-window.

mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree

2014-04-23T14:31:05Z

I noticed a regression where the omap sys_clkreq signal will never trigger for omap3 when booted with device tree while it triggers when booted in legacy mode. This means voltage scaling does not do anything when booted with device tree. Turns out the reason is we fail to initialize the SmartReflex enable bit in twl4030 with the following error: twl: not initialized And that happens because we are wrongly tinkering with the twl4030 registers in arch/arm/mach-omap2/omap_twl.c before the driver is initialized. Looking at the the SmartReflex bit enable code in omap_twl.c, we need to always set it. So let's fix the issue by always enabling the twl4030 SmartReflex bit in the drivers/mfd/twl-core.c probe, and drop the related code in omap_twl.c. Note that we still have some twl4030 tinkering left in omap_twl.c for the twl6030 case, but that's a different patch. Signed-off-by: Tony Lindgren Signed-off-by: Lee Jones

mfd: twl-core: Fix accessibility of some twl4030 audio registers

2014-03-19T08:58:43Z

There are some unused registers in twl4030 at I2C address 0x49 and function twl4030_49_nop_reg() is used to check accessibility of that registers. These registers are written in decimal format but the values are correct in hexadecimal format. (It can be checked few lines above the patched code - these registers are marked as unused there.) As a consequence three registers of audio submodule are treated as inaccessible (preamplifier carkit right and both handsfree registers). Cc: stable@vger.kernel.org Signed-off-by: Tomas Novotny Signed-off-by: Lee Jones

Merge tag 'ib-asoc-3.14.2' into for-mfd-next

2014-01-21T08:26:12Z

Immutable branch between MFD and ASoC due for the v3.14 merge window