kernel.git/drivers/media, branch linux-6.12.y

media: dvb-core: fix wrong reinitialization of ringbuffer on reopen

2026-03-13T16:20:32Z

commit bfbc0b5b32a8f28ce284add619bf226716a59bc0 upstream. dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock. Cc: stable@vger.kernel.org Fixes: 34731df288a5f ("V4L/DVB (3501): Dmxdev: use dvb_ringbuffer") Reported-by: syzbot+ab12f0c08dd7ab8d057c@syzkaller.appspotmail.com Tested-by: syzbot+ab12f0c08dd7ab8d057c@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/698a26d3.050a0220.3b3015.007d.GAE@google.com/ Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

media: dw9714: Fix powerup sequence

2026-03-13T16:20:22Z

[ Upstream commit 401aec35ac7bd04b4018a519257b945abb88e26c ] We have experienced seen multiple I2C errors while doing stress test on the module: dw9714 i2c-PRP0001:01: dw9714_vcm_resume I2C failure: -5 dw9714 i2c-PRP0001:01: I2C write fail Inspecting the powerup sequence we found that it does not match the documentation at: https://blog.arducam.com/downloads/DW9714A-DONGWOON(Autofocus_motor_manual).pdf """ (2) DW9714A requires waiting time of 12ms after power on. During this waiting time, the offset calibration of internal amplifier is operating for minimization of output offset current . """ This patch increases the powerup delay to follow the documentation. Fixes: 9d00ccabfbb5 ("media: i2c: dw9714: Fix occasional probe errors") Signed-off-by: Ricardo Ribalda Reviewed-by: Hans de Goede Tested-by: Neil Sun Reported-by: Naomi Huang Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: dw9714: add support for powerdown pin

2026-03-13T16:20:22Z

[ Upstream commit 03dca1842421b068d6a65b8ae16e2191882c7753 ] Add support for the powerdown pin (xSD), which can be used to put the VCM driver into power down mode. This is useful, for example, if the VCM driver's power supply cannot be controlled. The use of the powerdown pin is optional. Signed-off-by: Matthias Fend Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Stable-dep-of: 401aec35ac7b ("media: dw9714: Fix powerup sequence") Signed-off-by: Sasha Levin

media: dw9714: move power sequences to dedicated functions

2026-03-13T16:20:22Z

[ Upstream commit 1eefe42e9de503e422a9c925eebdbd215ee28966 ] Move the power-up and power-down sequences to their own functions. This is a preparation for the upcoming powerdown pin support. Signed-off-by: Matthias Fend Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Stable-dep-of: 401aec35ac7b ("media: dw9714: Fix powerup sequence") Signed-off-by: Sasha Levin

media: verisilicon: AV1: Fix tile info buffer size

2026-03-04T12:21:47Z

[ Upstream commit a505ca2db89ad92a8d8d27fa68ebafb12e04a679 ] Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory. Signed-off-by: Benjamin Gaignard Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder") Cc: stable@vger.kernel.org Reviewed-by: Nicolas Dufresne Signed-off-by: Nicolas Dufresne Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: venus: vdec: restrict EOS addr quirk to IRIS2 only

2026-03-04T12:21:46Z

[ Upstream commit 63c072e2937e6c9995df1b6a28523ed2ae68d364 ] On SM8250 (IRIS2) with firmware older than 1.0.087, the firmware could not handle a dummy device address for EOS buffers, so a NULL device address is sent instead. The existing check used IS_V6() alongside a firmware version gate: if (IS_V6(core) && is_fw_rev_or_older(core, 1, 0, 87)) fdata.device_addr = 0; else fdata.device_addr = 0xdeadb000; However, SC7280 which is also V6, uses a firmware string of the form "1.0.", which the version parser translates to 1.0.0. This unintentionally satisfies the `is_fw_rev_or_older(..., 1, 0, 87)` condition on SC7280. Combined with IS_V6() matching there as well, the quirk is incorrectly applied to SC7280, causing VP9 decode failures. Constrain the check to IRIS2 (SM8250) only, which is the only platform that needed this quirk, by replacing IS_V6() with IS_IRIS2(). This restores correct behavior on SC7280 (no forced NULL EOS buffer address). Fixes: 47f867cb1b63 ("media: venus: fix EOS handling in decoder stop command") Cc: stable@vger.kernel.org Reported-by: Mecid Closes: https://github.com/qualcomm-linux/kernel-topics/issues/222 Co-developed-by: Renjiang Han Signed-off-by: Renjiang Han Signed-off-by: Dikshita Agarwal Tested-by: Renjiang Han Signed-off-by: Bryan O'Donoghue Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: venus: vdec: fix error state assignment for zero bytesused

2026-03-04T12:21:46Z

[ Upstream commit 93ecd6ee95c38cb533fa25f48d3c1c8cb69f410f ] When hfi_session_flush is issued, all queued buffers are returned to the V4L2 driver. Some of these buffers are not processed and have bytesused = 0. Currently, the driver marks such buffers as error even during drain operations, which can incorrectly flag EOS buffers. Only capture buffers with zero payload (and not EOS) should be marked with VB2_BUF_STATE_ERROR. The check is performed inside the non-EOS branch to ensure correct handling. Fixes: 51df3c81ba10b ("media: venus: vdec: Mark flushed buffers with error state") Signed-off-by: Renjiang Han Reviewed-by: Vikash Garodia Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: i2c: ov01a10: Fix digital gain range

2026-03-04T12:21:45Z

[ Upstream commit 91848c99ed6a98daf77f4cb7d44cf3f13bc6998f ] Digital gain wraps-around at the maximum of 16838 / 0x3fff. Fix the maximum digital gain by setting it to 0x3fff. Signed-off-by: Mehdi Djait Reviewed-by: Hans de Goede Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: stm32: dcmipp: bytecap: clear all interrupts upon stream stop

2026-03-04T12:21:45Z

[ Upstream commit 222f1279edd9008ee35b62de156ddac84e31443c ] Ensure that there are no pending interrupts after we have stopped the pipeline. Indeed, it could happen that new interrupt has been generated during the stop_streaming processing hence clear them in order to avoid getting a new interrupt right from the start of a next start_streaming. Fixes: 28e0f3772296 ("media: stm32-dcmipp: STM32 DCMIPP camera interface driver") Cc: stable@vger.kernel.org Signed-off-by: Alain Volmat Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: ipu6: Fix RPM reference leak in probe error paths

2026-03-04T12:21:43Z

[ Upstream commit 6099f78e4c9223f4de4169d2fd1cded01279da1a ] Several error paths in ipu6_pci_probe() were jumping directly to out_ipu6_bus_del_devices without releasing the runtime PM reference. Add pm_runtime_put_sync() before cleaning up other resources. Cc: Stable@vger.kernel.org Fixes: 25fedc021985 ("media: intel/ipu6: add Intel IPU6 PCI device driver") Signed-off-by: Bingbu Cao Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin