kernel.git/drivers/media/tuners, branch linux-6.10.y

Revert "media: tuners: fix error return code of hybrid_tuner_request_state()"

2024-10-04T14:33:26Z

commit e25cc4be4616fcf5689622b3226d648aab253cdb upstream. This reverts commit b9302fa7ed979e84b454e4ca92192cf485a4ed41. As Fedor Pchelkin pointed out, this commit violates the convention of using the macro return value, which causes errors. For example, in functions tda18271_attach(), xc5000_attach(), simple_tuner_attach(). Link: https://lore.kernel.org/linux-media/20240424202031.syigrtrtipbq5f2l@fpc/ Suggested-by: Fedor Pchelkin Signed-off-by: Roman Smirnov Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman

media: xc2028: avoid use-after-free in load_firmware_cb()

2024-08-14T13:34:16Z

[ Upstream commit 68594cec291ff9523b9feb3f43fd853dcddd1f60 ] syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside. Signed-off-by: Chi Zhiling Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: tunner: xc5000: Refactor firmware load

2024-04-15T11:42:38Z

Make sure the firmware is released when we leave xc_load_fw_and_init_tuner() This change makes smatch happy: drivers/media/tuners/xc5000.c:1213 xc_load_fw_and_init_tuner() warn: 'fw' from request_firmware() not released on lines: 1213. Cc: Shuah Khan Signed-off-by: Ricardo Ribalda Signed-off-by: Hans Verkuil

media: tda18271: remove redundant assignment to variable bcal

2024-02-16T10:46:32Z

The variable bcal is being initialized with a value that is never read, it is being re-assigned in both paths of an if statement near the end of the function. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/media/tuners/tda18271-fe.c:473:2: warning: Value stored to 'bcal' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King Signed-off-by: Hans Verkuil

media: xc4000: Fix atomicity violation in xc4000_get_frequency

2024-02-05T11:57:44Z

In xc4000_get_frequency(): *freq = priv->freq_hz + priv->freq_offset; The code accesses priv->freq_hz and priv->freq_offset without holding any lock. In xc4000_set_params(): // Code that updates priv->freq_hz and priv->freq_offset ... xc4000_get_frequency() and xc4000_set_params() may execute concurrently, risking inconsistent reads of priv->freq_hz and priv->freq_offset. Since these related data may update during reading, it can result in incorrect frequency calculation, leading to atomicity violations. This possible bug is found by an experimental static analysis tool developed by our team, BassCheck[1]. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported when our tool analyzes the source code of Linux 6.2. To address this issue, it is proposed to add a mutex lock pair in xc4000_get_frequency() to ensure atomicity. With this patch applied, our tool no longer reports the possible bug, with the kernel configuration allyesconfig for x86_64. Due to the lack of associated hardware, we cannot test the patch in runtime testing, and just verify it according to the code logic. [1] https://sites.google.com/view/basscheck/ Fixes: 4c07e32884ab ("[media] xc4000: Fix get_frequency()") Cc: stable@vger.kernel.org Reported-by: BassCheck Signed-off-by: Gui-Dong Han <2045gemini@gmail.com> Signed-off-by: Hans Verkuil

media: dvb: symbol fixup for dvb_attach()

2023-09-09T07:15:11Z

In commit 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted to GPL-only marked symbols. This interacts oddly with the DVB logic which only uses dvb_attach() to load the dvb driver which then uses symbol_get(). Fix this up by properly marking all of the dvb_attach attach symbols as EXPORT_SYMBOL_GPL(). Fixes: 9011e49d54dc ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") Cc: stable Reported-by: Stefan Lippers-Hollmann Cc: Mauro Carvalho Chehab Cc: Christoph Hellwig Cc: linux-media@vger.kernel.org Cc: linux-modules@vger.kernel.org Acked-by: Luis Chamberlain Acked-by: Hans Verkuil Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

media: tuners: qt1010: replace BUG_ON with a regular error

2023-07-25T07:24:30Z

BUG_ON is unnecessary here, and in addition it confuses smatch. Replacing this with an error return help resolve this smatch warning: drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 Signed-off-by: Hans Verkuil

media: Switch i2c drivers back to use .probe()

2023-05-25T14:21:21Z

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König Signed-off-by: Hans Verkuil

media: it913x: Convert to platform remove callback returning void

2023-04-11T14:59:21Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Hans Verkuil

media: mxl5005s: Bounds check size used for max array index

2023-03-19T21:50:49Z

The use of state->CH_Ctrl[i].size in a shift operation implies that its value can be as much as 32, but the state->CH_Ctrl[i].val array is only 25 in size. Bounds check the size before shifting and looping. Fixes warnings seen with GCC 13: ../drivers/media/tuners/mxl5005s.c: In function 'MXL_ControlWrite_Group.isra': ../drivers/media/tuners/mxl5005s.c:3450:70: warning: array subscript 32 is above array bounds of 'u16[25]' {aka 'short unsigned int[25]'} [-Warray-bounds=] 3450 | state->CH_Ctrl[i].val[j] = (u8)((value >> j) & 0x01); | ~~~~~~~~~~~~~~~~~~~~~^~~ ../drivers/media/tuners/mxl5005s.c:238:13: note: while referencing 'val' 238 | u16 val[25]; /* Binary representation of Value */ | ^~~ Cc: Colin Ian King Signed-off-by: Kees Cook Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab