kernel.git/drivers/media/rc/Makefile, branch linux-4.13.y

[media] rc: promote lirc_sir out of staging

2017-04-05T17:50:57Z

Rename lirc_sir to sir_ir in the process. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

[media] rc: add driver for IR remote receiver on MT7623 SoC

2017-01-31T09:25:30Z

This patch adds driver for IR controller on MT7623 SoC. and should also work on similar Mediatek SoC. Currently testing successfully on NEC and SONY remote controller only but it should work on others (lirc, rc-5 and rc-6). Signed-off-by: Sean Wang Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

[media] rc: add support for IR LEDs driven through SPI

2017-01-30T16:21:20Z

The ir-spi is a simple device driver which supports the connection between an IR LED and the MOSI line of an SPI device. The driver, indeed, uses the SPI framework to stream the raw data provided by userspace through an rc character device. The chardev is handled by the LIRC framework and its functionality basically provides: - write: the driver gets a pulse/space signal and translates it to a binary signal that will be streamed to the IR led through the SPI framework. - set frequency: sets the frequency whith which the data should be sent. This is handle with ioctl with the LIRC_SET_SEND_CARRIER flag (as per lirc documentation) - set duty cycle: this is also handled with ioctl with the LIRC_SET_SEND_DUTY_CYCLE flag. The driver handles duty cycles of 50%, 60%, 70%, 75%, 80% and 90%, calculated on 16bit data. The character device is created under /dev/lircX name, where X is and ID assigned by the LIRC framework. Example of usage: fd = open("/dev/lirc0", O_RDWR); if (fd < 0) return -1; val = 608000; ret = ioctl(fd, LIRC_SET_SEND_CARRIER, &val); if (ret < 0) return -1; val = 60; ret = ioctl(fd, LIRC_SET_SEND_DUTY_CYCLE, &val); if (ret < 0) return -1; n = write(fd, buffer, BUF_LEN); if (n < 0 || n != BUF_LEN) ret = -1; close(fd); Signed-off-by: Andi Shyti Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

[media] lirc_serial: move out of staging and rename to serial_ir

2016-11-22T08:11:46Z

Signed-off-by: Sean Young

[media] media: rc: add driver for Amlogic Meson IR remote receiver

2014-11-26T15:29:01Z

Amlogic Meson SoCs include a infrared remote control receiver that can operate in two modes: "NEC" mode in which the hardware decodes frames using the NEC IR protocol, and "general" mode in which the receiver simply reports the duration of pulses and spaces for software decoding. This is a driver for the IR receiver that implements software decoding of received frames. Signed-off-by: Beniamino Galvani Acked-by: Carlo Caione Signed-off-by: Mauro Carvalho Chehab

[media] rc: port IgorPlug-USB to rc-core

2014-11-03T14:18:25Z

This is a complete re-write inspired by the original lirc driver. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

[media] rc: Introduce hix5hd2 IR transmitter driver

2014-09-23T20:03:57Z

IR transmitter driver for Hisilicon hix5hd2 soc By default all protocols are disabled. For example nec decoder can be enabled by either 1. ir-keytable -p nec 2. echo nec > /sys/class/rc/rc0/protocols See see Documentation/ABI/testing/sysfs-class-rc [mchehab@osg.samsung.com: Add a fixup for the driver to compile on archs that don't provide writel_relaxed() macro] Signed-off-by: Guoxiong Yan Signed-off-by: Zhangfei Gao Signed-off-by: Mauro Carvalho Chehab

[media] rc: Add support for decoding XMP protocol

2014-07-26T22:38:04Z

This protocol is found on Dreambox remotes [m.chehab@samsung.com: CodingStyle fixes and conflict fix] Signed-off-by: Marcel Mol Signed-off-by: Mauro Carvalho Chehab

[media] rc-core: rename ir-raw.c

2014-07-25T23:01:25Z

Better to be coherent and prefix this file with rc-, in order to help to identify to what subsystem it belongs. This is in preparaton for a latter patch that will transform the raw handling into a separate module. Signed-off-by: David Härdeman Signed-off-by: Mauro Carvalho Chehab

[media] rc-core: merge rc5 and streamzap decoders

2014-07-25T22:10:44Z

Now that the protocol is part of the scancode, it is pretty easy to merge the rc5 and streamzap decoders. An additional advantage is that the decoder is now stricter as it waits for the trailing silence before determining that a command is a valid rc5/streamzap command (which avoids collisions that I've seen with e.g. Sony protocols). Signed-off-by: David Härdeman Signed-off-by: Mauro Carvalho Chehab