kernel.git/drivers/media/platform/Kconfig, branch linux-5.0.y

media: platform: Add Aspeed Video Engine driver

2018-12-12T17:05:12Z

The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can capture and compress video data from digital or analog sources. With the Aspeed chip acting a service processor, the Video Engine can capture the host processor graphics output. Add a V4L2 driver to capture video data and compress it to JPEG images. Make the video frames available through the V4L2 streaming interface. Signed-off-by: Eddie James Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: sun6i: Add support for Allwinner CSI V3s

2018-11-23T10:15:59Z

Allwinner V3s SoC features a CSI module with parallel interface. This patch implement a v4l2 framework driver for it. Reviewed-by: Hans Verkuil Reviewed-by: Maxime Ripard Tested-by: Maxime Ripard Signed-off-by: Yong Deng Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: seco-cec: add Consumer-IR support

2018-11-22T18:17:10Z

Introduce support for Consumer-IR into seco-cec driver, as it shares the same interrupt for receiving messages. The device decodes RC5 signals only, defaults to hauppauge mapping. It will spawn an input interface using the RC framework (like CEC device). Signed-off-by: Ettore Chimenti Reviewed-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: add SECO cec driver

2018-11-22T18:12:28Z

This patch adds support to the CEC device implemented with a STM32 microcontroller in X86 SECO Boards, including UDOO X86. The communication is achieved via Braswell integrated SMBus (i2c-i801). The driver use direct access to the PCI addresses, due to the limitations of the specific driver in presence of ACPI calls. The basic functionalities are tested with success with cec-ctl and cec-compliance. Inspired by cros-ec-cec implementation, attaches to i915 driver cec-notifier. Signed-off-by: Ettore Chimenti Reviewed-by: Jacopo Mondi Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-10-29T21:29:58Z

Pull media updates from Mauro Carvalho Chehab: - new dvb frontend driver: lnbh29 - new sensor drivers: imx319 and imx 355 - some old soc_camera driver renames to avoid conflict with new drivers - new i.MX Pixel Pipeline (PXP) mem-to-mem platform driver - a new V4L2 frontend for the FWHT codec - several other improvements, bug fixes, code cleanups, etc * tag 'media/v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (289 commits) media: rename soc_camera I2C drivers media: cec: forgot to cancel delayed work media: vivid: Support 480p for webcam capture media: v4l2-tpg: fix kernel oops when enabling HFLIP and OSD media: vivid: Add 16-bit bayer to format list media: v4l2-tpg-core: Add 16-bit bayer media: pvrusb2: replace `printk` with `pr_*` media: venus: vdec: fix decoded data size media: cx231xx: fix potential sign-extension overflow on large shift media: dt-bindings: media: rcar_vin: add device tree support for r8a7744 media: isif: fix a NULL pointer dereference bug media: exynos4-is: make const array config_ids static media: cx23885: make const array addr_list static media: ivtv: make const array addr_list static media: bttv-input: make const array addr_list static media: cx18: Don't check for address of video_dev media: dw9807-vcm: Fix probe error handling media: dw9714: Remove useless error message media: dw9714: Fix error handling in probe function media: cec: name for RC passthrough device does not need 'RC for' ...

media: platform: video-mux: Register a subdev notifier

2018-10-04T19:35:08Z

Parse neighbor remote devices on the video muxes input ports, add them to a subdev notifier, and register the subdev notifier for the video mux, by calling v4l2_async_register_fwnode_subdev(). Signed-off-by: Steve Longerbeam Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: platform: fix cros-ec-cec build error

2018-09-17T18:32:29Z

Fix build when MFD_CROS_EC is not enabled but COMPILE_TEST=y. Fixes this build error: ERROR: "cros_ec_cmd_xfer_status" [drivers/media/platform/cros-ec-cec/cros-ec-cec.ko] undefined! Signed-off-by: Randy Dunlap Cc: Neil Armstrong Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: imx-pxp: add i.MX Pixel Pipeline driver

2018-09-11T17:32:17Z

Add a V4L2 mem-to-mem scaler/CSC driver for the Pixel Pipeline (PXP) version found on i.MX6ULL SoCs. A similar variant is used on i.MX7D. Since this driver only uses the legacy pipeline, it should be reasonably easy to extend it to work with the older PXP versions found on i.MX6UL, i.MX6SX, i.MX6SL, i.MX28, and i.MX23. The driver supports scaling and colorspace conversion. There is currently no support for rotation, alpha-blending, and the LUTs. Signed-off-by: Philipp Zabel Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2018-08-20T22:38:44Z

Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...

media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC

2018-08-16T09:04:47Z

Without the MFD driver, we run into a link error: drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_transmit': cros-ec-cec.c:(.text+0x474): undefined reference to `cros_ec_cmd_xfer_status' drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_set_log_addr': cros-ec-cec.c:(.text+0x60b): undefined reference to `cros_ec_cmd_xfer_status' drivers/media/platform/cros-ec-cec/cros-ec-cec.o: In function `cros_ec_cec_adap_enable': cros-ec-cec.c:(.text+0x77d): undefined reference to `cros_ec_cmd_xfer_status' As we can compile-test all the dependency, the extra '| COMPILE_TEST' is not needed to get the build coverage, and we can simply turn MFD_CROS_EC into a hard dependency to make it build in all configurations. Fixes: cd70de2d356e ("media: platform: Add ChromeOS EC CEC driver") Signed-off-by: Arnd Bergmann Signed-off-by: Lee Jones