kernel.git/drivers/media/pci, branch linux-4.12.y

saa7164: fix double fetch PCIe access condition

2017-08-11T15:33:55Z

commit 6fb05e0dd32e566facb96ea61a48c7488daa5ac3 upstream. Avoid a double fetch by reusing the values from the prior transfer. Originally reported via https://bugzilla.kernel.org/show_bug.cgi?id=195559 Thanks to Pengfei Wang for reporting. Signed-off-by: Steven Toth Reported-by: Pengfei Wang Signed-off-by: Mauro Carvalho Chehab Cc: Eduardo Valentin Signed-off-by: Greg Kroah-Hartman

cx88: Fix regression in initial video standard setting

2017-07-27T22:10:11Z

commit 4e0973a918b9a42e217093f078e04a61e5dd95a5 upstream. Setting initial standard at the top of cx8800_initdev would cause the first call to cx88_set_tvnorm() to return without programming any registers (leaving the driver saying it's set to NTSC but the hardware isn't programmed). Even worse, any subsequent attempt to explicitly set it to NTSC-M will return success but actually fail to program the underlying registers unless first changing the standard to something other than NTSC-M. Set the initial standard later in the process, and make sure the field is zero at the beginning to ensure that the call always goes through. This regression was introduced in the following commit: commit ccd6f1d488e7 ("[media] cx88: move width, height and field to core struct") Author: Hans Verkuil [media] cx88: move width, height and field to core struct Signed-off-by: Devin Heitmueller Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

2017-05-11T02:13:03Z

Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...

Annotate hardware config module parameters in drivers/media/

2017-04-20T11:02:32Z

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/media/. Suggested-by: Alan Cox Signed-off-by: David Howells Acked-by: Mauro Carvalho Chehab cc: mjpeg-users@lists.sourceforge.net cc: linux-media@vger.kernel.org

[media] media: pci: saa7164: remove dead code

2017-04-17T16:07:50Z

Remove dead code. The following line of code is never reached: return SAA_OK; Addresses-Coverity-ID: 114283 Signed-off-by: Gustavo A. R. Silva Reviewed-by: Peter Senna Tschudin Signed-off-by: Mauro Carvalho Chehab

[media] media: pci: saa7164: remove unnecessary code

2017-04-17T16:06:55Z

Remove unnecessary variable 'loop'. Signed-off-by: Gustavo A. R. Silva Reviewed-by: Peter Senna Tschudin Signed-off-by: Mauro Carvalho Chehab

[media] media: pci: constify stv0299_config structures

2017-04-17T16:04:18Z

Declare stv0299_config structures as const as they are only passed as an argument to the function dvb_attach. dvb_attach calls its first argument on the rest of its arguments. The first argument of dvb_attach in the changed cases is stv0299_attach and the parameter of this function to which the object references are passed is of type const. So, stv0299_config structures having this property can be made const. First line shows the file size before patching and second one shows size after patching. text data bss dec hex filename 9572 926 40 10538 292a media/pci/dm1105/dm1105.o 9636 862 40 10538 292a media/pci/dm1105/dm1105.o 15133 5408 0 20541 503d media/pci/ttpci/budget-av.o 15389 5152 0 20541 503d media/pci/ttpci/budget-av.o 15703 2326 36 18065 4691 media/pci/ttpci/budget-ci.o 15767 2262 36 18065 4691 media/pci/ttpci/budget-ci.o 10555 1918 4 12477 30bd drivers/media/pci/ttpci/budget.o 10683 1822 4 12509 30dd drivers/media/pci/ttpci/budget.o Signed-off-by: Bhumika Goyal Signed-off-by: Mauro Carvalho Chehab

[media] pci: mantis: constify mb86a16_config structure

2017-04-17T15:53:03Z

Declare mb86a16_config structure as const as it is either passed as an argument to the function dvb_attach or is dereferenced. dvb_attach calls its first argument on the rest of its arguments. The first argument of dvb_attach in the changed case is mb86a16_attach and the parameter of this function to which the object reference is passed is of type const. So, mb86a16_config structures having this property can be made const. Signed-off-by: Bhumika Goyal Signed-off-by: Mauro Carvalho Chehab

[media] cx88: constify mb86a16_config structure

2017-04-17T15:52:41Z

Declare mb86a16_config structure as const as it is only passed as an argument to the function dvb_attach. dvb_attach calls its first argument on the rest of its arguments. The first argument of dvb_attach in the changed case is mb86a16_attach and the parameter of this function to which the object reference is passed is of type const. So, mb86a16_config structures having this property can be made const. Signed-off-by: Bhumika Goyal Signed-off-by: Mauro Carvalho Chehab

[media] saa7134: constify nxt200x_config structures

2017-04-17T15:18:52Z

Declare nxt200x_config structures as const as they are only passed as an argument to the function dvb_attach. dvb_attach calls its first argument on the rest of its arguments. The first argument of dvb_attach in the changed cases is nxt200x_attach and the parameter of this function to which the object references are passed is of type const. So, nxt200x_config structures having this property can be made const. File size before: text data bss dec hex filename 21320 3776 16 25112 6218 saa7134/saa7134-dvb.o File size after: text data bss dec hex filename 21384 3744 16 25144 6238 saa7134/saa7134-dvb.o Signed-off-by: Bhumika Goyal Signed-off-by: Mauro Carvalho Chehab