kernel.git/drivers/media/pci/intel, branch linux-6.9.y

media: intel/ipu6: Fix build with !ACPI

2024-06-27T11:52:16Z

[ Upstream commit 8810e055b57543f3465cf3c15ba4980f9f14a84e ] Modify the code so it can be compiled tested in configurations that do not have ACPI enabled. It fixes the following errors: drivers/media/pci/intel/ipu-bridge.c:103:30: error: implicit declaration of function ‘acpi_device_handle’; did you mean ‘acpi_fwnode_handle’? [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:103:30: warning: initialization of ‘acpi_handle’ {aka ‘void *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion] drivers/media/pci/intel/ipu-bridge.c:110:17: error: implicit declaration of function ‘for_each_acpi_dev_match’ [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:110:74: error: expected ‘;’ before ‘for_each_acpi_consumer_dev’ drivers/media/pci/intel/ipu-bridge.c:104:29: warning: unused variable ‘consumer’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:103:21: warning: unused variable ‘handle’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:166:38: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:185:43: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:191:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:196:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:202:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:223:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:236:18: error: implicit declaration of function ‘acpi_get_physical_device_location’ [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:236:56: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:238:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:256:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:275:31: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:280:30: error: invalid use of undefined type ‘struct acpi_device’ drivers/media/pci/intel/ipu-bridge.c:469:26: error: implicit declaration of function ‘acpi_device_hid’; did you mean ‘dmi_device_id’? [-Werror=implicit-function-declaration] drivers/media/pci/intel/ipu-bridge.c:468:74: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=] drivers/media/pci/intel/ipu-bridge.c:637:58: error: expected ‘;’ before ‘{’ token drivers/media/pci/intel/ipu-bridge.c:696:1: warning: label ‘err_put_adev’ defined but not used [-Wunused-label] drivers/media/pci/intel/ipu-bridge.c:693:1: warning: label ‘err_put_ivsc’ defined but not used [-Wunused-label] drivers/media/pci/intel/ipu-bridge.c:691:1: warning: label ‘err_free_swnodes’ defined but not used [-Wunused-label] drivers/media/pci/intel/ipu-bridge.c:632:40: warning: unused variable ‘primary’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:632:31: warning: unused variable ‘fwnode’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:733:73: error: expected ‘;’ before ‘{’ token drivers/media/pci/intel/ipu-bridge.c:725:24: warning: unused variable ‘csi_dev’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:724:43: warning: unused variable ‘adev’ [-Wunused-variable] drivers/media/pci/intel/ipu-bridge.c:599:12: warning: ‘ipu_bridge_instantiate_ivsc’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu-bridge.c:444:13: warning: ‘ipu_bridge_create_connection_swnodes’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu-bridge.c:297:13: warning: ‘ipu_bridge_create_fwnode_properties’ defined but not used [-Wunused-function] drivers/media/pci/intel/ipu-bridge.c:155:12: warning: ‘ipu_bridge_check_ivsc_dev’ defined but not used [-Wunused-function] Signed-off-by: Ricardo Ribalda Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: ipu3-cio2: Request IRQ earlier

2024-05-30T07:44:48Z

[ Upstream commit a069f79bfa6ec1ea0744981ea8425c8a25322579 ] Call devm_request_irq() before registering the async notifier, as otherwise it would be possible to use the device before the interrupts could be delivered to the driver. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: ivsc: csi: Make use of sub-device state

2024-02-23T13:33:32Z

The MEI CSI driver was using sub-device state but still maintained its own format information and did its own locking. Rely on sub-device state instead. This also fixes a circular locking problem during link validation. Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: ivsc: csi: Swap SINK and SOURCE pads

2024-02-23T13:33:32Z

This patch swaps SINK and SOURCE pads of the MEI CSI sub-device. While this does change the UAPI by swapping the pads, the driver has never been usable in upstream kernel as the Intel IPU6 driver it depends on any functionality has not yet been merged. Fixes: 29006e196a56 ("media: pci: intel: ivsc: Add CSI submodule") Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: ipu-bridge: Serialise calls to IPU bridge init

2024-02-23T13:33:32Z

The IPU bridge initialisation will be called from multiple locations in the future. Serialise the access to devices' fwnodes in this context. Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: ipu-bridge: Move graph checking to IPU bridge

2024-02-23T13:33:32Z

Move checking the graph to the IPU bridge. This way the caller won't need to do it. Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil

media: ipu-bridge: Add ov01a10 in Dell XPS 9315

2024-02-23T13:33:32Z

Add Omnivision ov01a10 sensor used in Dell XPS 9315, and use the driver default frequency. Signed-off-by: Sakari Ailus Reviewed-by: Daniel Scally Signed-off-by: Hans Verkuil

media: ipu3-cio2: Further clean up async subdev link creation

2024-01-22T16:23:59Z

Use v4l2_create_fwnode_links_to_pad() to create links from async sub-devices to the CSI-2 receiver subdevs. Signed-off-by: Sakari Ailus Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil

media: videobuf2: core: Rename min_buffers_needed field in vb2_queue

2023-12-13T16:31:27Z

Rename min_buffers_needed into min_queued_buffers and update the documentation about it. Signed-off-by: Benjamin Gaignard Signed-off-by: Hans Verkuil [hverkuil: Drop the change where min_queued_buffers + 1 buffers would be] [hverkuil: allocated. Now this patch only renames this field instead of making] [hverkuil: a functional change as well.] [hverkuil: Renamed 3 remaining min_buffers_needed occurrences.]

media: ipu-bridge: Change ov2740 link-frequency to 180 MHz

2023-12-13T12:21:20Z

The only known devices that use an ov2740 sensor in combination with the ipu-bridge code are various Lenovo ThinkPad models, which all need the link-frequency to be 180 MHz for things to work properly. The ov2740 driver used to only support 360 MHz link-frequency, which is why the ipu-bridge entry used 360 MHz, but now the ov2740 driver has been extended to also support 180 MHz. The ov2740 is actually used with 360 MHz link-frequency on Chromebooks. On Chromebooks the camera/sensor fwnode graph is part of the ACPI tables. The ipu-bridge code is used to dynamically generate the graph when it is missing, so it is not used on Chromebooks and the ov2740 will keep using 360 MHz link-frequency there as before. Signed-off-by: Hans de Goede Signed-off-by: Sakari Ailus Signed-off-by: Hans Verkuil