kernel.git/drivers/media/i2c, branch linux-5.5.y

media: i2c: ov5695: Fix power on and off sequences

2020-04-17T14:11:56Z

[ Upstream commit f1a64f56663e9d03e509439016dcbddd0166b2da ] From the measured hardware signal, OV5695 reset pin goes high for a short period of time during boot-up. From the sensor specification, the reset pin is active low and the DT binding defines the pin as active low, which means that the values set by the driver are inverted and thus the value requested in probe ends up high. Fix it by changing probe to request the reset GPIO initialized to high, which makes the initial state of the physical signal low. In addition, DOVDD rising must occur before DVDD rising from spec., but regulator_bulk_enable() API enables all the regulators asynchronously. Use an explicit loops of regulator_enable() instead. For power off sequence, it is required that DVDD falls first. Given the bulk API does not give any guarantee about the order of regulators, change the driver to use regulator_disable() instead. The sensor also requires a delay between reset high and first I2C transaction, which was assumed to be 8192 XVCLK cycles, but 1ms is recommended by the vendor. Fix this as well. Signed-off-by: Dongchun Zhu Signed-off-by: Tomasz Figa Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: i2c: video-i2c: fix build errors due to 'imply hwmon'

2020-04-17T14:11:55Z

[ Upstream commit 64d4fc9926f09861a35d8f0f7d81f056e6d5af7b ] Fix build fault when CONFIG_HWMON is a module, and CONFIG_VIDEO_I2C as builtin. This is due to 'imply hwmon' in the respective Kconfig. Issue build log: ld: drivers/media/i2c/video-i2c.o: in function `amg88xx_hwmon_init': video-i2c.c:(.text+0x2e1): undefined reference to `devm_hwmon_device_register_with_info Cc: rdunlap@infradead.org Fixes: acbea6798955 (media: video-i2c: add hwmon support for amg88xx) Signed-off-by: Matt Ranostay Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: i2c: mt9v032: fix enum mbus codes and frame sizes

2020-02-24T07:38:02Z

[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ] This driver supports both the mt9v032 (color) and the mt9v022 (mono) sensors. Depending on which sensor is used, the format from the sensor is different. The format.code inside the dev struct holds this information. The enum mbus and enum frame sizes need to take into account both type of sensors, not just the color one. To solve this, use the format.code in these functions instead of the hardcoded bayer color format (which is only used for mt9v032). [Sakari Ailus: rewrapped commit message] Suggested-by: Wenyou Yang Signed-off-by: Eugen Hristev Reviewed-by: Laurent Pinchart Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: ov5640: Fix check for PLL1 exceeding max allowed rate

2020-02-24T07:38:02Z

[ Upstream commit 2e3df204f9af42a47823ee955c08950373417420 ] The variable _rate is by ov5640_compute_sys_clk() which returns zero if the PLL exceeds 1GHz. Unfortunately, the check to see if the max PLL1 output is checking 'rate' and not '_rate' and 'rate' does not ever appear to be 0. This patch changes the check against the returned value of '_rate' to determine if the PLL1 output exceeds 1GHz. Fixes: aa2882481cad ("media: ov5640: Adjust the clock based on the expected rate") Signed-off-by: Adam Ford Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: i2c: adv748x: Fix unsafe macros

2020-02-14T21:53:05Z

commit 0d962e061abcf1b9105f88fb850158b5887fbca3 upstream. Enclose multiple macro parameters in parentheses in order to make such macros safer and fix the Clang warning below: drivers/media/i2c/adv748x/adv748x-afe.c:452:12: warning: operator '?:' has lower precedence than '|'; '|' will be evaluated first [-Wbitwise-conditional-parentheses] ret = sdp_clrset(state, ADV748X_SDP_FRP, ADV748X_SDP_FRP_MASK, enable ? ctrl->val - 1 : 0); Fixes: 3e89586a64df ("media: i2c: adv748x: add adv748x driver") Reported-by: Dmitry Vyukov Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kieran Bingham Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: i2c: Use the correct style for SPDX License Identifier

2019-11-10T16:47:14Z

This patch corrects the SPDX License Identifier style in header files related to I2C controlled media codec drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 and some manual changes. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: ov6650: fix smatch warning

2019-11-08T06:28:22Z

Initialize ret to 0 to fix this smatch error: drivers/media/i2c/ov6650.c:853 ov6650_video_probe() error: uninitialized symbol 'ret'. Signed-off-by: Hans Verkuil Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: hi556: Add support for Hi-556 sensor

2019-11-05T12:12:49Z

Add a V4L2 sub-device driver for Hynix Hi-556 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [sakari.ailus@linux.intel.com: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies] Signed-off-by: Shawn Tu Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: bt819: Reduce amount of F* words in the world

2019-11-05T12:01:17Z

Replace F* word with something less offensive. [hverkuil: dropped 'Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")' tag since nothing was broken] Signed-off-by: Andy Shevchenko Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: vpx3220: make array input_vals static, makes object smaller

2019-11-05T11:48:55Z

Don't populate the array input_vals on the stack but instead make it static. Makes the object code smaller by 106 bytes. Before: text data bss dec hex filename 11744 3536 128 15408 3c30 drivers/media/i2c/vpx3220.o After: text data bss dec hex filename 11574 3600 128 15302 3bc6 drivers/media/i2c/vpx3220.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab