kernel.git/drivers/media/i2c, branch linux-5.0.y

media: ov2659: make S_FMT succeed even if requested format doesn't match

2019-05-31T13:45:02Z

[ Upstream commit bccb89cf9cd07a0690d519696a00c00a973b3fe4 ] This driver returns an error if unsupported media bus pixel code is requested by VIDIOC_SUBDEV_S_FMT. But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst, Drivers must not return an error solely because the requested format doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. So select default format code and return success in that case. This is detected by v4l2-compliance. Cc: "Lad, Prabhakar" Signed-off-by: Akinobu Mita Acked-by: Lad, Prabhakar Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helper

2019-05-31T13:45:02Z

[ Upstream commit ccdd85d518d8b9320ace1d87271f0ba2175f21fa ] In preparation for adding asynchronous subdevice support to the driver, don't acquire v4l2_clk from the driver .probe() callback as that may fail if the clock is provided by a bridge driver which may be not yet initialized. Move the v4l2_clk_get() to ov6650_video_probe() helper which is going to be converted to v4l2_subdev_internal_ops.registered() callback, executed only when the bridge driver is ready. Signed-off-by: Janusz Krzysztofik Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: ov6650: Fix sensor possibly not detected on probe

2019-05-25T16:22:05Z

commit 933c1320847f5ed6b61a7d10f0a948aa98ccd7b0 upstream. After removal of clock_start() from before soc_camera_init_i2c() in soc_camera_probe() by commit 9aea470b399d ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650 driver could no longer probe the sensor successfully because its clock was no longer turned on in advance. The issue was initially worked around by adding that missing clock_start() equivalent to OMAP1 camera interface driver - the only user of this sensor - but a propoer fix should be rather implemented in the sensor driver code itself. Fix the issue by inserting a delay between the clock is turned on and the sensor I2C registers are read for the first time. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Fixes: 9aea470b399d ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") Signed-off-by: Janusz Krzysztofik Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: v4l2: i2c: ov7670: Fix PLL bypass register values

2019-05-08T05:23:00Z

commit 61da76beef1e4f0b6ba7be4f8d0cf0dac7ce1f55 upstream. The following commits: commit f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675") commit 04ee6d92047e ("[media] media: ov7670: add possibility to bypass pll for ov7675") introduced the ability to bypass PLL multiplier and use input clock (xvclk) as pixel clock output frequency for ov7675 sensor. PLL is bypassed using register DBLV[7:6], according to ov7670 and ov7675 sensor manuals. Macros used to set DBLV register seem wrong in the driver, as their values do not match what reported in the datasheet. Fix by changing DBLV_* macros to use bits [7:6] and set bits [3:0] to default 0x0a reserved value (according to datasheets). While at there, remove a write to DBLV register in "ov7675_set_framerate()" that over-writes the previous one to the same register that takes "info->pll_bypass" flag into account instead of setting PLL multiplier to 4x unconditionally. And, while at there, since "info->pll_bypass" is only used in set/get_framerate() functions used by ov7675 only, it is not necessary to check for the device id at probe time to make sure that when using ov7670 "info->pll_bypass" is set to false. Fixes: f6dd927f34d6 ("[media] media: ov7670: calculate framerate properly for ov7675") Signed-off-by: Jacopo Mondi Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: mt9m111: set initial frame size other than 0x0

2019-04-05T20:34:48Z

[ Upstream commit 29856308137de1c21eda89411695f4fc6e9780ff ] This driver sets initial frame width and height to 0x0, which is invalid. So set it to selection rectangle bounds instead. This is detected by v4l2-compliance detected. Cc: Enrico Scholz Cc: Michael Grzeschik Cc: Marco Felsch Signed-off-by: Akinobu Mita Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: ov7740: fix runtime pm initialization

2019-04-05T20:34:34Z

[ Upstream commit 12aceee1f412c3ddc7750155fec06c906f14ab51 ] The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(), and this makes this device's runtime PM usage count a negative value. The ov7740_set_ctrl() tries to do something only if the device's runtime PM usage counter is nonzero. ov7740_set_ctrl() { if (!pm_runtime_get_if_in_use(&client->dev)) return 0; ; pm_runtime_put(&client->dev); return ret; } However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup() while the runtime PM of this device is not yet enabled. In this case, the pm_runtime_get_if_in_use() returns -EINVAL (!= 0). Therefore we can't bail out of this function and the usage count is decreased by pm_runtime_put() without increment. This fixes this problem by enabling the runtime PM of this device before v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called when the runtime PM is enabled. Cc: Wenyou Yang Signed-off-by: Akinobu Mita Tested-by: Eugen Hristev Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: cx25840: mark pad sig_types to fix cx231xx init

2019-03-23T19:11:34Z

commit 46c039d06b6ecabb94bd16c3a999b28dc83b79ce upstream. Without this, we get failures like this when the kernel attempts to initialize a cx231xx device: [16046.153653] cx231xx 3-1.2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 6 interfaces [16046.153900] cx231xx 3-1.2:1.1: can't change interface 3 alt no. to 3: Max. Pkt size = 0 [16046.153907] cx231xx 3-1.2:1.1: Identified as Hauppauge USB Live 2 (card=9) [16046.154350] i2c i2c-11: Added multiplexed i2c bus 13 [16046.154379] i2c i2c-11: Added multiplexed i2c bus 14 [16046.267194] cx25840 10-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0) [16048.424551] cx25840 10-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes) [16048.463224] cx231xx 3-1.2:1.1: v4l2 driver version 0.0.3 [16048.567878] cx231xx 3-1.2:1.1: Registered video device video2 [v4l2] [16048.568001] cx231xx 3-1.2:1.1: Registered VBI device vbi0 [16048.568419] cx231xx 3-1.2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3 [16048.568425] cx231xx 3-1.2:1.1: video EndPoint Addr 0x84, Alternate settings: 5 [16048.568431] cx231xx 3-1.2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2 [16048.568436] cx231xx 3-1.2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2 [16048.568448] usb 3-1.2: couldn't get decoder output pad for V4L I/O [16048.568453] cx231xx 3-1.2:1.1: V4L2 device vbi0 deregistered [16048.568579] cx231xx 3-1.2:1.1: V4L2 device video2 deregistered [16048.569001] cx231xx: probe of 3-1.2:1.1 failed with error -22 Likely a regession since Commit 9d6d20e652c0 ("media: v4l2-mc: switch it to use the new approach to setup pipelines") (v4.19-rc1-100-g9d6d20e652c0), which introduced the use of PAD_SIGNAL_DV within v4l2_mc_create_media_graph(). This also modifies cx25840 to remove the VBI pad, matching the action taken in Commit 092a37875a22 ("media: v4l2: remove VBI output pad"). Fixes: 9d6d20e652c0 ("media: v4l2-mc: switch it to use the new approach to setup pipelines") Cc: stable@vger.kernel.org Signed-off-by: Cody P Schafer Tested-by: Hans Verkuil Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: i2c: ov5640: Fix post-reset delay

2019-03-23T19:11:25Z

commit 1d4c41f3d887bcd66e82cb2fda124533dad8808a upstream. According to the ov5640 specification (2.7 power up sequence), host can access the sensor's registers 20ms after reset. Trying to access them before leads to undefined behavior and result in sporadic initialization errors. Signed-off-by: Loic Poulain Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Cc: Adam Ford Signed-off-by: Greg Kroah-Hartman

Merge tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-12-25T21:00:14Z

Pull media updates from Mauro Carvalho Chehab: "First set of media patches contains: - Three new platform drivers: aspeed-video seco-sed and sun5i-csi; - One new sensor driver: imx214; - Support for Xbox DVD Movie Playback kit remote controller; - Removal of the legacy friio driver. The functionalities were ported to another driver, already merged; - New staging driver: Rockchip VPU; - Added license text or SPDX tags to all media documentation files; - Usual set of cleanup, fixes and enhancements" * tag 'media/v4.20-6' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (263 commits) media: cx23885: only reset DMA on problematic CPUs media: ddbridge: Move asm includes after linux ones media: drxk_hard: check if parameter is not NULL media: docs: fix some GPL licensing ambiguity at the text media: platform: Add Aspeed Video Engine driver media: dt-bindings: media: Add Aspeed Video Engine binding documentation media: vimc: fix start stream when link is disabled media: v4l2-device: Link subdevices to their parent devices if available media: siano: Use kmemdup instead of duplicating its function media: rockchip vpu: remove some unused vars media: cedrus: don't initialize pointers with zero media: cetrus: return an error if alloc fails media: cedrus: Add device-tree compatible and variant for A64 support media: cedrus: Add device-tree compatible and variant for H5 support media: dt-bindings: media: cedrus: Add compatibles for the A64 and H5 media: video-i2c: check if chip struct has set_power function media: video-i2c: support runtime PM media: staging: media: imx: Use of_node_name_eq for node name comparisons media: v4l2-subdev: document controls need _FL_HAS_DEVNODE media: vivid: Improve timestamping ...

media: video-i2c: check if chip struct has set_power function

2018-12-07T13:33:23Z

Not all future supported video chips will always have power management support, and so it is important to check before calling set_power() is defined. Signed-off-by: Matt Ranostay Reviewed-by: Akinobu Mita Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab