kernel.git/drivers/media/i2c, branch linux-4.15.y

media: imx274: Fix error handling, add MAINTAINERS entry

2017-11-30T09:45:12Z

Add the missing MAINTAINERS entry for imx274, fix error handling in driver probe and unregister the correct control handler in driver remove. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: et8ek8: select V4L2_FWNODE

2017-11-30T09:42:19Z

v4l2_async_register_subdev_sensor_common() is only provided when CONFIG_V4L2_FWNODE is enabled, otherwise we get a link failure: drivers/media/i2c/et8ek8/et8ek8_driver.o: In function `et8ek8_probe': et8ek8_driver.c:(.text+0x884): undefined reference to `v4l2_async_register_subdev_sensor_common' This adds a Kconfig 'select' statement like all the other users of this interface have. Fixes: d8932f38c10f ("media: et8ek8: Add support for flash and lens devices") Signed-off-by: Arnd Bergmann Reviewed-by: Sebastian Reichel Acked-by: Pavel Machek Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: ov13858: Select V4L2_FWNODE

2017-11-30T09:41:58Z

The ov13858 driver depends on the V4L2 fwnode, thus add that to Kconfig. Fixes: 5fcf092e0c9f ("[media] ov13858: add support for OV13858 sensor") Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab

media: drivers: remove "/**" from non-kernel-doc comments

2017-11-30T09:19:03Z

Several comments are wrongly tagged as kernel-doc, causing those warnings: drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'irq' drivers/media/rc/st_rc.c:98: warning: No description found for parameter 'data' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'solo_dev' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'ch' drivers/media/pci/solo6x10/solo6x10-enc.c:183: warning: No description found for parameter 'qp' drivers/media/usb/pwc/pwc-dec23.c:652: warning: Cannot understand * on line 652 - I thought it was a doc line drivers/media/usb/dvb-usb/cinergyT2-fe.c:40: warning: No description found for parameter 'op' drivers/media/usb/dvb-usb/friio-fe.c:301: warning: Cannot understand * (reg, val) commad list to initialize this module. on line 301 - I thought it was a doc line drivers/media/rc/streamzap.c:201: warning: No description found for parameter 'urb' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'intf' drivers/media/rc/streamzap.c:333: warning: No description found for parameter 'id' drivers/media/rc/streamzap.c:464: warning: No description found for parameter 'interface' drivers/media/i2c/ov5647.c:432: warning: Cannot understand * @short Subdev core operations registration on line 432 - I thought it was a doc line drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'd' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'addr' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'wlen' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rbuf' drivers/media/usb/dvb-usb/friio.c:35: warning: No description found for parameter 'rlen' drivers/media/platform/vim2m.c:350: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/tua6100.c:34: warning: cannot understand function prototype: 'struct tua6100_priv ' drivers/media/platform/sti/hva/hva-h264.c:140: warning: cannot understand function prototype: 'struct hva_h264_stereo_video_sei ' drivers/media/platform/sti/hva/hva-h264.c:150: warning: Cannot understand * @frame_width: width in pixels of the buffer containing the input frame on line 150 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:356: warning: Cannot understand * @ slice_size: slice size on line 356 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:369: warning: Cannot understand * @ bitstream_size: bitstream size on line 369 - I thought it was a doc line drivers/media/platform/sti/hva/hva-h264.c:395: warning: Cannot understand * @seq_info: sequence information buffer on line 395 - I thought it was a doc line drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fe' drivers/media/dvb-frontends/sp887x.c:137: warning: No description found for parameter 'fw' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'n' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'd' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_i' drivers/media/dvb-frontends/sp887x.c:287: warning: No description found for parameter 'quotient_f' drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c:83: warning: cannot understand function prototype: 'struct ttusb ' drivers/media/platform/sh_veu.c:277: warning: No description found for parameter 'priv' drivers/media/dvb-frontends/zl10036.c:33: warning: cannot understand function prototype: 'int zl10036_debug; ' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'state' drivers/media/dvb-frontends/zl10036.c:179: warning: No description found for parameter 'frequency' drivers/media/platform/rcar_fdp1.c:1139: warning: No description found for parameter 'priv' drivers/media/platform/ti-vpe/vpe.c:933: warning: No description found for parameter 'priv' drivers/media/usb/gspca/ov519.c:36: warning: No description found for parameter 'fmt' drivers/media/usb/dvb-usb/dib0700_devices.c:3367: warning: No description found for parameter 'adap' Signed-off-by: Mauro Carvalho Chehab

media: lm3560: add a missing kernel-doc parameter

2017-11-30T09:19:03Z

Fix this warning: drivers/media/i2c/lm3560.c:69: warning: No description found for parameter 'dev' Signed-off-by: Mauro Carvalho Chehab

media: tvp514x: fix kernel-doc parameters

2017-11-30T09:18:59Z

There are some struct fields that aren't documented, and some consts whose comments start with /**, but they aren't kernel-doc annotations. So, fix it: drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'hdl' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'pad' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'format' drivers/media/i2c/tvp514x.c:127: warning: No description found for parameter 'int_seq' drivers/media/i2c/tvp514x.c:219: warning: cannot understand function prototype: 'const struct v4l2_fmtdesc tvp514x_fmt_list[] = ' drivers/media/i2c/tvp514x.c:235: warning: cannot understand function prototype: 'const struct tvp514x_std_info tvp514x_std_list[] = ' drivers/media/i2c/tvp514x.c:941: warning: No description found for parameter 'fmt' drivers/media/i2c/tvp514x.c:941: warning: Excess function parameter 'format' description in 'tvp514x_set_pad_format' drivers/media/i2c/tvp514x.c:1208: warning: cannot understand function prototype: 'const struct i2c_device_id tvp514x_id[] = ' Signed-off-by: Mauro Carvalho Chehab

media: s5k6aa: describe some function parameters

2017-11-30T09:18:58Z

as warned: drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset' drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd' Signed-off-by: Mauro Carvalho Chehab

media: s5k6a3: document some fields at struct s5k6a3

2017-11-30T09:18:57Z

drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock' drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'clock_frequency' drivers/media/i2c/s5k6a3.c:68: warning: No description found for parameter 'power_count' Signed-off-by: Mauro Carvalho Chehab

media: m5mols: fix some kernel-doc markups

2017-11-30T09:18:55Z

Fix those warnings: drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_num' drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'addr_den' drivers/media/i2c/m5mols/m5mols_capture.c:42: warning: No description found for parameter 'val' drivers/media/i2c/m5mols/m5mols_capture.c:60: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_controls.c:134: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'data' drivers/media/i2c/m5mols/m5mols_core.c:124: warning: No description found for parameter 'length' drivers/media/i2c/m5mols/m5mols_core.c:124: warning: Excess function parameter 'size' description in 'm5mols_swap_byte' drivers/media/i2c/m5mols/m5mols_core.c:142: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:241: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:299: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:324: warning: No description found for parameter 'reg' drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:357: warning: No description found for parameter 'mode' drivers/media/i2c/m5mols/m5mols_core.c:374: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:429: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:503: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:671: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:694: warning: No description found for parameter 'info' drivers/media/i2c/m5mols/m5mols_core.c:798: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'sd' drivers/media/i2c/m5mols/m5mols_core.c:853: warning: No description found for parameter 'on' Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2017-11-16T04:30:12Z

Pull media updates from Mauro Carvalho Chehab: - Documentation for digital TV (both kAPI and uAPI) are now in sync with the implementation (except for legacy/deprecated ioctls). This is a major step, as there were always a gap there - New sensor driver: imx274 - New cec driver: cec-gpio - New platform driver for rockship rga and tegra CEC - New RC driver: tango-ir - Several cleanups at atomisp driver - Core improvements for RC, CEC, V4L2 async probing support and DVB - Lots of drivers cleanup, fixes and improvements. * tag 'media/v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (332 commits) dvb_frontend: don't use-after-free the frontend struct media: dib0700: fix invalid dvb_detach argument media: v4l2-ctrls: Don't validate BITMASK twice media: s5p-mfc: fix lockdep warning media: dvb-core: always call invoke_release() in fe_free() media: usb: dvb-usb-v2: dvb_usb_core: remove redundant code in dvb_usb_fe_sleep media: au0828: make const array addr_list static media: cx88: make const arrays default_addr_list and pvr2000_addr_list static media: drxd: make const array fastIncrDecLUT static media: usb: fix spelling mistake: "synchronuously" -> "synchronously" media: ddbridge: fix build warnings media: av7110: avoid 2038 overflow in debug print media: Don't do DMA on stack for firmware upload in the AS102 driver media: v4l: async: fix unregister for implicitly registered sub-device notifiers media: v4l: async: fix return of unitialized variable ret media: imx274: fix missing return assignment from call to imx274_mode_regs media: camss-vfe: always initialize reg at vfe_set_xbar_cfg() media: atomisp: make function calls cleaner media: atomisp: get rid of storage_class.h media: atomisp: get rid of wrong stddef.h include ...