kernel.git/drivers/media/dvb/ttpci, branch linux-2.6.17.y

Fix budget-av compile failure

2006-08-07T03:52:16Z

Currently I am doing lots of refactoring work in the dvb tree. This bugfix became necessary to fix 2.6.17 whilst I was in the middle of this work. Unfortunately after I tested the original code for the patch, I generated the diff against the wrong tree (I accidentally used a tree with part of the refactoring code in it). This resulted in the reported compile errors because that tree (a) was incomplete, and (b) used features which are simply not in the mainline kernel yet. Many apologies for the error and problems this has caused. :( Signed-off-by: Andrew de Quincey Signed-off-by: Michael Krufky Signed-off-by: Greg Kroah-Hartman

v4l/dvb: Backport the budget driver DISEQC instability fix

2006-07-25T03:35:22Z

Backport the budget driver DISEQC instability fix. Signed-off-by: Oliver Endriss Signed-off-by: Andrew de Quincey Signed-off-by: Michael Krufky Signed-off-by: Chris Wright Signed-off-by: Greg Kroah-Hartman

v4l/dvb: Fix CI interface on PRO KNC1 cards

2006-07-25T03:35:20Z

The original driver had a restriction that if a card as an saa7113 chip, then it cannot have a CI interface. This is not the case. Signed-off-by: Andrew de Quincey Signed-off-by: Michael Krufky Signed-off-by: Chris Wright Signed-off-by: Greg Kroah-Hartman

v4l/dvb: Fix CI on old KNC1 DVBC cards

2006-07-25T03:35:20Z

These cards do not need the tda10021 configuration change when data is streamed through a CAM module. This disables it for these ones. Signed-off-by: Andrew de Quincey Signed-off-by: Michael Krufky Signed-off-by: Chris Wright Signed-off-by: Greg Kroah-Hartman

v4l/dvb: Fix budget-av frontend detection

2006-07-25T03:35:20Z

The budget-av needs this GPIO set low for most cards to work. Signed-off-by: Andrew de Quincey Signed-off-by: Michael Krufky Signed-off-by: Chris Wright Signed-off-by: Greg Kroah-Hartman

V4L/DVB (4037): Make the bridge devices that depend on I2C dependant on I2C

2006-05-23T18:56:38Z

Ref: Bugzilla 6179, 6589 Signed-off-by: Manu Abraham Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3774): Create V4L1 config options

2006-05-12T22:54:53Z

V4L1 API is depreciated and should be removed soon from kernel. This patch adds two new options, one to disable V4L1 drivers, and another to disable V4L1 compat module. This way, it would be easy to check what still depends on V4L1 stuff, allowing also to test if app works fine with V4L2 only support. Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3740): Fix oops in budget-av with CI

2006-05-12T22:54:43Z

Now that the CI code reinitialises the frontend, need to move the CI initialisation to after the frontend init in order to ensure the frontend is always in a good state. Fixes an oops caused by the frontend being NULL as well. Signed-off-by: Andrew de Quincey Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3726): Fix TT budget-ci 1.1 CI slots

2006-05-12T22:54:38Z

It turns out the firmware on the TT budget-ci 1.1 slots doesn't generate interrupts. This patch adds support for this using polling mode on these slots. Signed-off-by: Andrew de Quincey Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3673): Fix budget-av CAM reset

2006-04-02T07:56:02Z

Unfortunately on the budget-av board, the CAM reset line is tied to the frontend reset line, so resetting the CAM also zaps the frontend. This breaks the tda1004x at least, and causes it to fail to tune until the budget-av module is reloaded. This patch adds an exported function to dvb_frontend that allows a card to forcibly reinitialise a frontend. The budget-av now does this on CAM reset, which corrects this problem. since they do not tie the CAM reset line to the frontend reset line. Signed-off-by: Andrew de Quincey Signed-off-by: Mauro Carvalho Chehab